I have troubles with powering a brand new camera with hEX PoE RB960PGS.
The led blinks with red and I constantly get theses messages in the logs:
poe-out info: ether5 detected poe-out status: wait_for_load
poe-out info: ether5 detected poe-out status: on
poe-out warning: ether5 detected poe-out status: power_reset
poe-out info: ether5 detected poe-out status: wait_for_load
poe-out info: ether5 detected poe-out status: on
poe-out warning: ether5 detected poe-out status: power_reset
...
The PD complies with IEEE 802.3af and draws max. 3W at 24V. Currently I have no other means to check if the camera or router is at fault (this happens for all 4 PoE ports and various eth cables). Any ideas what could be wrong?
thanks!
jacx