Hello, I need feedback about temperatures that you got with this device.

https://mikrotik.com/product/RB750Gr3

Any information would be appreciated.

Regards.

@krafg, sorry for the late response...
Room-Temperature during the Test ca. 16.5°C

Results
------------------------
ROS ver.6.48.4

/system health print
voltage: 27.2V
temperature: 17C
------------------------
ROS ver.6.49.1

/system health print
voltage: 27.3V
temperature: 20C
------------------------
ROS ver.7.1rc6

/system health print
# NAME VALUE TYPE
0 voltage 0.5 V

** Temperature not showing up!
** Bad Voltage Reading !
Terminal or in WinBox (See Attachment)

running 6.49.1 on my attic, approx 20C in that room ...

Thanks a lot for that information, are really very very good temps. So, I will retire an old RB450G that stay at 77°C and reboots constantly with 35°C on my attic.

I looked up this device and I believe that is a really good replacement but only I needed make sure about the temps of this device.

One more time thanks a lot. It was not been late.
Regards.

Thanks @ConnyMercier

In the "ROS ver.7.1rc6" is software cosmetic bug, information is forwarded to person in charge.

In the "ROS ver.7.1rc6" is software cosmetic bug, information is forwarded to person in charge.

@elans,
ROS ver.7.1rc7 still has the "cosmetic" bug