Hi,
I have bought a GPON SFP module (https://www.fs.com/de-en/products/133619.html), with the goal to eliminate the Huawei HG8010G ONT which is currently between my fiber and my Mikrotik.
I would like to connect with it via SSH, so i can change the Mac and vendor settings.
But i'm not able to make a connection to it, how can i achieve this?
I do see that the SFP is recognized:
> interface/ethernet/monitor "Gateway_SFP+"
;;; SFP+
name: Gateway_SFP+
status: no-link
auto-negotiation: disabled
sfp-module-present: yes
sfp-rx-loss: yes
sfp-tx-fault: no
sfp-type: SFP-or-SFP+
sfp-connector-type: SC
sfp-link-length-sm: 20km
sfp-vendor-name: FS
sfp-vendor-part-number: GPON-ONU-34-20BI
sfp-vendor-revision: 01
sfp-vendor-serial: G2230326208
sfp-manufacturing-date: 22-09-06
sfp-wavelength: 1310nm
sfp-temperature: 49C
sfp-supply-voltage: 3.334V
sfp-tx-bias-current: 9mA
sfp-tx-power: -40dBm
sfp-rx-power: -40dBm
eeprom-checksum: good
and i have given it an IP, which is in the same network:
> ip/address/print
# ADDRESS NETWORK INTERFACE
;;; Local
0 10.0.0.1/16 10.0.0.0 bridge-local
4 10.0.0.20/32 10.0.0.0 Gateway_SFP+
But when i try to connect to it, i receive an connection refused.
ssh ONTUSER@10.0.0.20
ssh: connect to host 10.0.0.20 port 22: Connection refused
What do i need to do, to make connect to the GPON SFP module, so i can change the settings?