I need to see how many PSU are connected and fully operational... How command can show these informations? I put the command "/system health print" but I not be able to see these informations needed:
[admin@MKT] > /system health print
fan-mode: auto
use-fan: main
active-fan: main
use-fan2: main
active-fan2: main
cpu-overtemp-check: yes
cpu-overtemp-threshold: 100C
cpu-overtemp-startup-delay: 1m
voltage: 23.8V
current: 1489mA
temperature: 31C
cpu-temperature: 56C
power-consumption: 35.4W
fan1-speed: 2905RPM
fan2-speed: 2904RPM[/flash][/flash]
The hardware is a CCR1036-8G-2S+ model, running RouterOS 6.48.3. Thank you in advance!