Community discussions

MikroTik App
 
Gerard
Trainer
Trainer
Topic Author
Posts: 336
Joined: Wed Apr 26, 2006 4:21 am
Location: Kentucky, USA
Contact:

RB411/411R Extra LED's ??

Sat Dec 08, 2007 6:28 am

I was just looking at the RB411 in the newsletter and I noticed some additional led's on the lower right of the board.. Since I already see the normal led's on the board I'm REALLY REALLY hoping those are signal strength lights..

Can someone from Mikrotik please let us know what they are going to be used for..

Thanks!
-Gerard
RB411.jpg
You do not have the required permissions to view the files attached to this post.
Certified Mikrotik Trainer
 
uldis
MikroTik Support
MikroTik Support
Posts: 3439
Joined: Mon May 31, 2004 2:55 pm

Re: RB411/411R Extra LED's ??

Mon Dec 10, 2007 10:46 am

first led indicates the NAND memory access.
About ohter leds - you will be able to use it for signal strenght of for some other advanced features.
Currently the signal strenght monitoring is not added in the RouterOS yes, but we will make it soon.
If you have some other ideas where to use those leds, you can post the ideas here.
 
Stanislav Hrncir
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Sat Aug 04, 2007 7:35 pm
Location: CZ
Contact:

Re: RB411/411R Extra LED's ??

Mon Dec 10, 2007 12:14 pm

what is "whiteLIGHTNING" near buzzer ? :)

Is realy idea adding non "blink" mode for this led eg. ON / OFF ? My idea is unsoldering this leds and mount solid state relay, because i need some I/O output...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24605
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB411/411R Extra LED's ??

Mon Dec 10, 2007 12:49 pm

what is "whiteLIGHTNING" near buzzer ? :)

Is realy idea adding non "blink" mode for this led eg. ON / OFF ? My idea is unsoldering this leds and mount solid state relay, because i need some I/O output...
have you not noticed that all boards have some kind of nickname on them? Triple-Shot, Crossroads, miniRouter, trifecta etc.
No answer to your question? How to write posts
 
InoX
Forum Guru
Forum Guru
Posts: 1969
Joined: Tue Jan 09, 2007 6:44 pm

Re: RB411/411R Extra LED's ??

Mon Dec 10, 2007 6:43 pm

Will be a replace and for RB133? Like 411 but with 3xminiPCI?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24605
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB411/411R Extra LED's ??

Tue Dec 11, 2007 9:01 am

eventually
No answer to your question? How to write posts
 
User avatar
jorj
Member
Member
Posts: 398
Joined: Mon Mar 12, 2007 4:34 pm
Location: /dev/null

Re: RB411/411R Extra LED's ??

Tue Dec 11, 2007 11:00 am

first led indicates the NAND memory access.
About ohter leds - you will be able to use it for signal strenght of for some other advanced features.
Currently the signal strenght monitoring is not added in the RouterOS yes, but we will make it soon.
If you have some other ideas where to use those leds, you can post the ideas here.
It would be nice if you could make some choice for the user to make the leds indicate:
- signal strenght, or
- ccq for the wireless link or some other kind of link quality indicator, or
- % cpu used, or
- % memory free
 
kbyrd
just joined
Posts: 13
Joined: Sun Jun 03, 2007 6:26 am

Re: RB411/411R Extra LED's ??

Thu Mar 06, 2008 12:07 am

what is "whiteLIGHTNING" near buzzer ? :)

Is realy idea adding non "blink" mode for this led eg. ON / OFF ? My idea is unsoldering this leds and mount solid state relay, because i need some I/O output...


The one next to ethernet port you can make stay on or off
:led user-led yes(or no)

Is there a command for the other led's yet that im missing? noticed led1-5 gives "not implemented yet" msg.
 
CarulloS
Member
Member
Posts: 406
Joined: Thu Feb 02, 2006 5:52 am

Re: RB411/411R Extra LED's ??

Fri Mar 07, 2008 5:57 am

I really don't see the usefulness of making the lights for signal or much anything else except relay type outputs, I don't have a single configuration of radio / enclosure that I can aim and operate while looking at the leds.

Can you guys really aim antennas while looking at the leds??

Scott
 
Gerard
Trainer
Trainer
Topic Author
Posts: 336
Joined: Wed Apr 26, 2006 4:21 am
Location: Kentucky, USA
Contact:

Re: RB411/411R Extra LED's ??

Fri Mar 07, 2008 6:01 am

As soon as they add this I'll start putting a plexiglass window in the back/bottom of the enclosure antenna's I'm using so that my installers can see the alignment LED's..

-Gerard
Certified Mikrotik Trainer
 
dastring
just joined
Posts: 17
Joined: Mon Aug 18, 2008 7:39 am

Re: RB411/411R Extra LED's ??

Tue Apr 14, 2009 5:59 am

Is there a way to possibly use some scripts to light up those LEDs for alignment purposes? Signal strength or quality of link? That would be immensely useful for my uses....
 
alexspils
Member Candidate
Member Candidate
Posts: 176
Joined: Thu Jun 05, 2008 8:57 pm

Re: RB411/411R Extra LED's ??

Wed Apr 15, 2009 9:48 am

yes there is a way.it is described in wiki
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Posts: 761
Joined: Thu Oct 15, 2009 3:52 am

Re: RB411/411R Extra LED's ??

Wed Jan 12, 2011 12:52 pm

As soon as they add this I'll start putting a plexiglass window in the back/bottom of the enclosure antenna's I'm using so that my installers can see the alignment LED's..

-Gerard

have you done the plexiglass installation??
by professionals, for professionals....
Don't forget to give KARMA!!!

Who is online

Users browsing this forum: Google Adsense [Bot], stelios_g and 22 guests