Community discussions

 
User avatar
karo84
Member Candidate
Member Candidate
Topic Author
Posts: 194
Joined: Fri Aug 17, 2007 9:06 am

Bridge Filter problem on ROS 3.0 and ROS 3.1

Mon Jan 28, 2008 10:16 pm

Hi
We have ROS 3.0 on routerboard 133, and have bridged one EOIP with one Ethernet interfaces.
In bridge filter counters are only 0, and sometomis they become very large, or very small even minus.
What is for problem, I have tried checking use IP firewall checkbox, and without it, but there was no difference.
No rule works, even when I create drop all in chain forward and place it before 0, the packets pass through the bridge.
No rule drops the packets in input chain, when I told to drop all input.
Why?

Some advise or suggestions, please.
Thanks with best Regards
Karapet Aznavuryan
 
User avatar
rafaelcamplone
just joined
Posts: 4
Joined: Sun Nov 05, 2006 4:01 am
Location: Buenos Aires
Contact:

Re: Bridge Filter problem on ROS 3.0 and ROS 3.1

Tue Jan 29, 2008 1:55 pm

I have the same configuration on routerboard 133: sr2 with eoip and bridged with port lan. And work fine, try reset your config and reload the settings
 
User avatar
karo84
Member Candidate
Member Candidate
Topic Author
Posts: 194
Joined: Fri Aug 17, 2007 9:06 am

Re: Bridge Filter problem on ROS 3.0 and ROS 3.1

Tue Jan 29, 2008 9:05 pm

rafael Thanks, For reply, But we have done it several times, but there was no use. (

Who is online

Users browsing this forum: No registered users and 15 guests