but this time it's hardware problem not software and i've got some of 4xx :/hi,
the 1xx/5xx's suffered firmware loss with power problems in the past, formware updates seem to have fixed that. unfortunate if MT have a controlled restart on the 433 problem.
Hello Normis, you post answer last year, but i found the same problems on my new RB433AH, 2 boards don't power up after reseting (switch of and on) it for some seconds.1. no
2. yes, but check with distributor
UPS to do with his hands - http://tandem.ck.ua/ups_mt-eng.phpI think that the cheap and good way how to slove this is to buy come offline UPS and connect RB directly to the battery. UPS will make sure the battery is still charged. Or you can buy some big 12V battery (car starter battery) and some good battery charger with storage charge function and you have UPS that will last more than 2 days without power supply and is aslo very good filter.
UPS to do with his hands - http://tandem.ck.ua/ups_mt-eng.phpI think that the cheap and good way how to slove this is to buy come offline UPS and connect RB directly to the battery. UPS will make sure the battery is still charged. Or you can buy some big 12V battery (car starter battery) and some good battery charger with storage charge function and you have UPS that will last more than 2 days without power supply and is aslo very good filter.
UPS does this very well.
UPS-monitor here - http://tandem.ck.ua/ups_mtm-eng.php
Monitoring UPS in real time here http://tandem.ck.ua/soft_apps.php