Community discussions

MikroTik App
  4. Other topics
  5. RouterBOARD hardware

RB493 & Netinstall

Post Reply
 
nomade
just joined
Topic Author
Posts: 1
Joined: Fri Jun 22, 2007 6:24 pm

RB493 & Netinstall

Thu May 07, 2009 1:53 pm

People, my router has been having problems.
Code: Select all
RouterBOOT booter 2.18

RouterBoard 493

CPU frequency: 300 MHz
  Memory size:  64 MB

Press any key within 2 seconds to enter setup..
loading kernel from nand... OK
setting up elf image... OK
jumping to kernel code
Wen try to NetInstall
Code: Select all
RouterBOOT booter 2.18

RouterBoard 493

CPU frequency: 300 MHz
  Memory size:  64 MB

Press any key within 2 seconds to enter setup..
trying bootp protocol... OK
Got IP address: 10.1.1.10
resolved mac address 00:0F:B0:F8:05:D7
transfer started ........................ transfer ok, time=1.85s
setting up elf image... OK
jumping to kernel code


Does anybody have any ideas?
Tranks
Top
 
User avatar
Letni
Member
Member
Posts: 376
Joined: Tue Dec 05, 2006 5:16 am
Location: South Carolina

Re: RB493 & Netinstall

Thu May 07, 2009 2:44 pm

I recall seeing this issue once when the desktop I was using to netinstall from had 2 NICS. I believe disabling all other NIC's than the one that was connected to RB fixed the issue.

If that does not take care of it, you could try upgrading the firmware first. MT has available 2.19 on the routerboard.com website. I am running 2.20 on mine and is included with 3.23, you may need to e-mail support for a copy of it though.

-Louis
Top
Post Reply

Who is online

Users browsing this forum: Irish9 and 34 guests
  4. Other topics
  5. RouterBOARD hardware