Community discussions

MikroTik App
 
User avatar
m4rk0
Member Candidate
Member Candidate
Topic Author
Posts: 195
Joined: Sat Feb 16, 2008 8:30 pm
Location: BA

Suggestion / request for Routerboard hardware

Wed Aug 19, 2009 1:08 am

Hello,

I want to suggest for new or upgrade current RouterBoards with at least one I/O RELAY (electrically operated switch) which would be controlled through RouterOS...
That wouldn't be big problem for Your electrical engineers...
Relay would be cool eg. to reset power supplies if on same location other RBs freeze or something like that and You want to restart them (for Output) OR for Input to add motion sensor and log activity on RB... + SCRIPTING it would be WONDERFUL!!! Etc...

And would be nice to add some kind of HARDWARE watchdog not in-software watchdog for reseting if ether/wlan ports are frozen...


Thank You and I hope You will consider about requests :)
http://www.mreza-wisp.ba/
Please, give Karma if I fix your problem
Certified MTCNA
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24713
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Suggestion / request for Routerboard hardware

Wed Aug 19, 2009 2:03 pm

You can already monitor serial port signals: http://www.mikrotik.com/testdocs/ros/2. ... gwatch.php
Also, a number of routerboards have fan headers that can be connected to low power relay.
No answer to your question? How to write posts
 
User avatar
m4rk0
Member Candidate
Member Candidate
Topic Author
Posts: 195
Joined: Sat Feb 16, 2008 8:30 pm
Location: BA

Re: Suggestion / request for Routerboard hardware

Wed Aug 19, 2009 9:51 pm

You can already monitor serial port signals: http://www.mikrotik.com/testdocs/ros/2. ... gwatch.php
Also, a number of routerboards have fan headers that can be connected to low power relay.
Hello,

I didn't know for SIGWATCH...
Can You tell me how can I control fan headers to send signal to relay?
http://www.mreza-wisp.ba/
Please, give Karma if I fix your problem
Certified MTCNA
 
ctech4285
Frequent Visitor
Frequent Visitor
Posts: 90
Joined: Sat Aug 15, 2009 8:49 pm

Re: Suggestion / request for Routerboard hardware

Thu Aug 20, 2009 4:09 am

i want temperatrue sensor and voltage sensor on board so i can narrow down why the routerboard runs unstable
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24713
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Suggestion / request for Routerboard hardware

Thu Aug 20, 2009 8:54 am

some routerboard model already have voltage monitors
No answer to your question? How to write posts
 
User avatar
m4rk0
Member Candidate
Member Candidate
Topic Author
Posts: 195
Joined: Sat Feb 16, 2008 8:30 pm
Location: BA

Re: Suggestion / request for Routerboard hardware

Thu Aug 20, 2009 3:22 pm

some routerboard model already have voltage monitors
Does RB433, RB433AH, RB600 has fan headers and how to control them through ROS?
http://www.mreza-wisp.ba/
Please, give Karma if I fix your problem
Certified MTCNA
 
ctech4285
Frequent Visitor
Frequent Visitor
Posts: 90
Joined: Sat Aug 15, 2009 8:49 pm

Re: Suggestion / request for Routerboard hardware

Fri Aug 21, 2009 2:31 am

RB433, RB433AH do have fan headers..
unter system helth you got a couple of options
 
User avatar
m4rk0
Member Candidate
Member Candidate
Topic Author
Posts: 195
Joined: Sat Feb 16, 2008 8:30 pm
Location: BA

Re: Suggestion / request for Routerboard hardware

Fri Aug 21, 2009 2:42 am

RB433, RB433AH do have fan headers..
unter system helth you got a couple of options
I can't find how to send signal on fan headers... If I put RELAY there...
http://www.mreza-wisp.ba/
Please, give Karma if I fix your problem
Certified MTCNA

Who is online

Users browsing this forum: solomon777 and 14 guests