Community discussions

MUM Europe 2020
 
triac
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Mon Feb 07, 2005 7:35 pm
Location: Italy

RB600: problems after routerboot and routeros update...

Mon Sep 21, 2009 9:40 pm

Hi, I have two RB600 boards just acquired and the problem is auto-reboot every 30-50 secs... (all two boards same problem...).

Routerboot: 2.18
RouterOS: 3.10

I've updated routerboot to 2.19 and routerOS to 3.30, now the boards work fine (no auto reboot) but there is a "problem" with eth ports...

The phisical Eth ports are "shifted" in winbox or terminal box... the real Eth1 are labeled as Eth2 in terminal... Eth2 is labeled as Eth3 and Eth3 is labeled as Eth1.... What's happen?

Tnx

Paolo
Paolo Torri
 
netwatcher
just joined
Posts: 5
Joined: Sat Sep 19, 2009 12:38 pm

Re: RB600: problems after routerboot and routeros update...

Wed Sep 23, 2009 9:52 am

Make sure that you use the newest firmware (routerboot version) for the Rb600 as it had a fix for the DDR about six months ago.
 
triac
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Mon Feb 07, 2005 7:35 pm
Location: Italy

Re: RB600: problems after routerboot and routeros update...

Wed Sep 23, 2009 10:40 am

Hi netwatcher, tnx for reply...

Can You let me know where I can find last routerboot version? Now I have 2.19...

"for the Rb600 as it had a fix for the DDR about six months ago"

hehehe... strange life... I've purchased a RB600 about 1 year ago and work fine without problems... these two boards purchased about 2 months ago have problems.... bah!

tnx again

Paolo
Paolo Torri
 

Who is online

Users browsing this forum: No registered users and 28 guests