Community discussions

MUM Europe 2020
 
jalokim
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 76
Joined: Thu Dec 07, 2006 1:39 pm
Location: PL, Tychy
Contact:

Are you planning to deploy VoIP enduser hardware?

Wed Jul 28, 2010 11:05 am

Hi,

Guys are you planning to set up any voip hardware? Ideal would be 711 with integrated voip. So we put 2x ethernet cable on roof (one for ethernet + phone lines one for power).

Or RB450g with radio and voip?

This would be the best CPE solution.

M.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24434
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Are you planning to deploy VoIP enduser hardware?

Wed Jul 28, 2010 2:57 pm

if by guys you mean mikrotik, better address those to sales@mikrotik.com because this is a community forum

AFAIK there are and will be no plans for any VOIP devices
No answer to your question? How to write posts
 
changeip
Forum Guru
Forum Guru
Posts: 3804
Joined: Fri May 28, 2004 5:22 pm

Re: Are you planning to deploy VoIP enduser hardware?

Wed Jul 28, 2010 8:47 pm

buy one of these and just stick it in the same enclosure or case:

http://www.telephonyware.com/telephonyw ... ht286.html

Its about half the size of a routerboard.
Colo and Wholesale Bandwidth Available! Sales at SanDiegoBroadband dot com
 
jalokim
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 76
Joined: Thu Dec 07, 2006 1:39 pm
Location: PL, Tychy
Contact:

Re: Are you planning to deploy VoIP enduser hardware?

Wed Jul 28, 2010 11:04 pm

if by guys you mean mikrotik, better address those to sales@mikrotik.com because this is a community forum
yup, community, but You normis is from MT, so the recipment of this question is correct :)
AFAIK there are and will be no plans for any VOIP devices
IMHO this is bad approach ... as going into triple play is only "right" solution, and MT has noting incommon with tv this is natural way of evolution of routerboards for me as an integrator and wisp/isp

M.
 
jalokim
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 76
Joined: Thu Dec 07, 2006 1:39 pm
Location: PL, Tychy
Contact:

Re: Are you planning to deploy VoIP enduser hardware?

Wed Jul 28, 2010 11:06 pm

buy one of these and just stick it in the same enclosure or case:

http://www.telephonyware.com/telephonyw ... ht286.html

Its about half the size of a routerboard.
And how are you going to connect it to rb on the roof with cpe? as 411/711 has only one eth? What about power? What about warranty ? Plenty of problems that could be solved with one integrated rb. And ofc - quality of voip by grandstream is not so good...

M.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1831
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Are you planning to deploy VoIP enduser hardware?

Thu Jul 29, 2010 2:37 am

ZyXEL make a small ethernet router that has 1x WAN, 1x LAN and 2x FXS ports. It will do PPPoE on the native vlan and can put voip on a seperate vlan.

Just use the Mikrotik as the CPE on the roof, and then terminate the customer PPPoE connection and VoIP with the ZyXEL.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
RK
Long time Member
Long time Member
Posts: 560
Joined: Tue Nov 21, 2006 11:22 am
Location: Winnipeg, Canada and Central America

Re: Are you planning to deploy VoIP enduser hardware?

Thu Jul 29, 2010 9:49 am

Hi,

Guys are you planning to set up any voip hardware? Ideal would be 711 with integrated voip. So we put 2x ethernet cable on roof (one for ethernet + phone lines one for power).
Are you seriously suggesting running two cat5e cables from the customer to the antenna outside? That's crazy.
It is so much simpler, cheaper, and safer to put the ATA indoors.
 
RK
Long time Member
Long time Member
Posts: 560
Joined: Tue Nov 21, 2006 11:22 am
Location: Winnipeg, Canada and Central America

Re: Are you planning to deploy VoIP enduser hardware?

Thu Jul 29, 2010 9:51 am

And ofc - quality of voip by grandstream is not so good...
Is this just a guess or have you had problems with a specific grandstream products?
Our grandstream ATAs and phones sound at least as good as POTS.
 
RK
Long time Member
Long time Member
Posts: 560
Joined: Tue Nov 21, 2006 11:22 am
Location: Winnipeg, Canada and Central America

Re: Are you planning to deploy VoIP enduser hardware?

Thu Jul 29, 2010 9:52 am

ZyXEL make a small ethernet router that has 1x WAN, 1x LAN and 2x FXS ports. It will do PPPoE on the native vlan and can put voip on a seperate vlan.
I think Linksys and Grandstream have similar products as well.

There are plenty of affordable VoIP adapters in the market already.
Mikrotik should continue to focus on routing and wireless IMO.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1831
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: Are you planning to deploy VoIP enduser hardware?

Thu Jul 29, 2010 12:08 pm

There are plenty of affordable VoIP adapters in the market already.
Mikrotik should continue to focus on routing and wireless IMO.

Agreed!
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
csickles
Forum Guru
Forum Guru
Posts: 1257
Joined: Fri May 28, 2004 8:46 pm
Location: Phoenix, AZ
Contact:

Re: Are you planning to deploy VoIP enduser hardware?

Fri Jul 30, 2010 8:47 am

Darn !!!

And I was hoping for an IP enabled, voice activated toaster!!
You know, with a built in web interface, so I could control it from my smart phone from the other room..
I wanted to be able to load it at night, and then in the morning when I got up, browse to the toaster, select the toast level and start the cycle and then have it email me or even better IM me when it was done. I also want a web cam in it so I can watch it cook (or burn as the case may be)..
Oh and an expansion connection for the coffee maker…
COOL !!! :lol:

I know shut up Smart @SS....
Things that make you go "Hmmmmmmmm"...

Craig
 
johndjmix
newbie
Posts: 47
Joined: Fri Aug 13, 2010 12:13 am

Re: Are you planning to deploy VoIP enduser hardware?

Sun Aug 15, 2010 7:01 am

Actually that would be kinda cool .lol.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24434
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Are you planning to deploy VoIP enduser hardware?

Mon Aug 16, 2010 9:54 am

You are able to do that with a RouterBOARD. Use the beeper, or the LED to connect to some kind of relay that turns on the toaster, then make a script that enables the LED or the beeper.
No answer to your question? How to write posts
 
csickles
Forum Guru
Forum Guru
Posts: 1257
Joined: Fri May 28, 2004 8:46 pm
Location: Phoenix, AZ
Contact:

Re: Are you planning to deploy VoIP enduser hardware?

Tue Aug 17, 2010 8:46 am

OOOHHH ... !!!

I know !!! lets get adrianatkins to build it !!!!

He is the resedent microcontroller wizard, and he keeps saying he is bored stiff... :lol:


That should keep hin ocupied for a couple of days...

Now watch him show up at a MUM with one !!! :lol:

I know shut up Smart @SS....
Things that make you go "Hmmmmmmmm"...

Craig

Who is online

Users browsing this forum: Google [Bot] and 26 guests