Community discussions

 
maxfava
Member Candidate
Member Candidate
Topic Author
Posts: 219
Joined: Mon Oct 17, 2005 12:30 am

experience

Mon Oct 17, 2005 12:46 am

Hi,
I have a little WISP.
Until now I have used Dlink product and I have realized an hot spot with 3 AP on 2.4GHz covering 1 Km beam metropolitan area.
Now customer are began to much to manage with a Dlink consumer product.

All my custumers have Dlink 900AP+ and DLINK 2000AP+.

I want Use Routerboard together SR5 for backhall and CM9 for AP.
I want to know if there is someone that use as basestation AP the routerboard 532 and CPE 900AP+ or 2000AP+ and what the experience.

I have experience that different vendor have different behaviour.
Ciao
Max
 
NZLamb
newbie
Posts: 46
Joined: Wed Oct 19, 2005 6:10 am
Location: New Zealand

Mon Nov 21, 2005 1:17 am

Works fine for me using latest firmware on the D-Link AP and having it set up in client mode, with Mikrotik set up as ap-bridge. This is good for several km as long as you have reasonable antennas.

Do note that I haven't tested it for long term reliability so your results may vary.
 
phendry
Member Candidate
Member Candidate
Posts: 258
Joined: Fri May 28, 2004 4:42 pm

Fri Jun 09, 2006 12:16 pm

OT - Hi NZ. What part of New Zealand are you in? Curious to know the RF regs over there. paul at hendry dot tc ;)
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Fri Jun 09, 2006 12:38 pm

Regs are pretty simple

4w's for 2.4
1w for 5.15-5.25
4w's for 5.25-5.35
4w for 5.725 to 5.825 PtMP
200w for 5.725 to 5.825 PtP:D
 
NZLamb
newbie
Posts: 46
Joined: Wed Oct 19, 2005 6:10 am
Location: New Zealand

Fri Jun 09, 2006 1:51 pm

I'm in Blenheim. Beccara has covered the regs exactly :)
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Fri Jun 09, 2006 1:51 pm

4w's for 2.4
Humph!
200w for 5.725 to 5.825 PtP
Aaargh!

:)

Best regards,
Christian Meis
 
cmit
Forum Guru
Forum Guru
Posts: 1552
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Fri Jun 09, 2006 1:51 pm

200W? Do you grill your sheep with that? :D

Christian
Best regards,
Christian Meis
 
phendry
Member Candidate
Member Candidate
Posts: 258
Joined: Fri May 28, 2004 4:42 pm

Fri Jun 09, 2006 2:29 pm

200W? Do you grill your sheep with that? :D
I think that's what makes the lamb extra tender ;)

I have a few other questions about NZ, could I be cheeky and get either of you to drop me an email as I'm not sure the MK support forum is the best place for a discussion :)
 
NZLamb
newbie
Posts: 46
Joined: Wed Oct 19, 2005 6:10 am
Location: New Zealand

Sat Jun 10, 2006 1:11 am

Sure Paul!

FYI and anyone else interested, the full NZ regs covering unlicensed bands can be found at http://www.rsm.govt.nz/licensing/gurls/gurl-srd.html

-- EDIT --

WLAN related stuff is at http://www.rsm.govt.nz/licensing/frl/information.html
Last edited by NZLamb on Sat Jun 10, 2006 1:22 am, edited 1 time in total.
 
NZLamb
newbie
Posts: 46
Joined: Wed Oct 19, 2005 6:10 am
Location: New Zealand

Sat Jun 10, 2006 1:13 am

200W? Do you grill your sheep with that? :D
No, just the possums. :wink: Unless you count myself...
 
jonbrewer
Member Candidate
Member Candidate
Posts: 183
Joined: Sat Jun 05, 2004 5:56 am
Location: Wellington, New Zealand
Contact:

Sun Jun 11, 2006 12:56 pm

Regs are pretty simple

4w's for 2.4
1w for 5.15-5.25
4w's for 5.25-5.35
4w for 5.725 to 5.825 PtMP
200w for 5.725 to 5.825 PtP:D
Gee, that's funny. In New Zealand 5.25-5.35 is 200mW, or 1W if you have TPC and DFC. Read the regs!!!
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Sun Jun 11, 2006 1:15 pm

Meh, i was posting off the top of my head

Who is online

Users browsing this forum: No registered users and 20 guests