Community discussions

 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

New Products

Thu Mar 10, 2011 4:12 pm

LAN, FTTx, Wireless. ISP operator
 
soooc
newbie
Posts: 25
Joined: Thu Mar 10, 2011 1:51 pm

Re: New Products

Thu Mar 10, 2011 4:20 pm

Why doesn't RB750UP contain gigabit eth1? This solution is only for small country side AP, not for heavy load :(
 
David2006
just joined
Posts: 4
Joined: Mon May 29, 2006 6:37 pm

Re: New Products

Thu Mar 10, 2011 4:37 pm

Becouse if they add 1Gbs uplink it will make a perfect machine for our UBNTu radio sites :)) .

Why USB port? 8x ethernet is better feature... :((( .


But still the RB750UP seems to be the best news (depend on the price later...) - still the rest news are almost no competition for UBNTu wireless allinone products (AirBeam, GPS Sync, ect. ... ).
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu Mar 10, 2011 7:04 pm

why RB2011 five Fast Ethernet ports? Why do not all like the Giga Ethernet RB1200?

Bad RB


Why does RB751xxx RSMA connectors?


unreal
what? RB751 has optional MMCX connector, but antenna is built in. read more carefully
why RB2011 five Fast Ethernet ports? Why do not all like the Giga Ethernet RB1200?
because it will be super low cost
No answer to your question? How to write posts
 
jcrites2008
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Fri May 02, 2008 10:53 pm

Re: New Products

Thu Mar 10, 2011 7:24 pm

Sheesh, mikrotik releases all these cool new products and people just complain about them. Sorry, they can't make everything have gigabit and quad-core processors for $100. I for one am glad to see a dual-core processor and tons of options now for routerboards that have more than 5 ports. 2 years ago they only had around 2 or so? Now there is half a dozen. Pick the one that fits your needs and budget. Also, the new 1W router looks very appealing to me and that does have gigabit! I kind of wish the one with POE out had gigabit though. Hopefully it has a better temperature ratings than the regular 750. Overall, I am very pleased to see Mikrotik pushing ahead like this, way to go guys!
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: New Products

Thu Mar 10, 2011 7:32 pm

Hi Normis,

Is there also going to be a RB1100 AH X2-style Board with SFP onboard sometime soon?
To be honest, I actually assumed that these higher class boards would be
the first to be outfitted with SFP :) I know of absolutely nobody who would need a low-cost SFP CPE...
FTTx is just way too uncommon...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu Mar 10, 2011 7:42 pm

Hi Normis,

Is there also going to be a RB1100 AH X2-style Board with SFP onboard sometime soon?
To be honest, I actually assumed that these higher class boards would be
the first to be outfitted with SFP :) I know of absolutely nobody who would need a low-cost SFP CPE...
FTTx is just way too uncommon...
all of our country is FFTx :) depends on the region probably
No answer to your question? How to write posts
 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: New Products

Thu Mar 10, 2011 7:59 pm

Now that was unexpected :) I didn't know that FTTx is common anywhere in the world right now ...
Well, now that you put it that way, it of course does make sense...
Still, any plans on incorporating SFP into the high-end routerboards?
If I might make a wish, please include 2 SFP ports to be able to use
the Routerboards in a Ring topology (1 in, 1 out)
 
Lupin
Member Candidate
Member Candidate
Posts: 265
Joined: Mon Feb 16, 2009 10:22 pm
Location: Italy

Re: New Products

Thu Mar 10, 2011 10:21 pm

I hoped to see the SXT 20dB antenna in list.
It would be perfect! sigh :(
 
xkolar
just joined
Posts: 1
Joined: Tue Feb 08, 2011 8:05 pm

Re: New Products

Fri Mar 11, 2011 1:58 am

Really appreciate all the new products, but I'm still missing something like 413G and/or at least 433G SFP (1 giga eth+poe and 2 sfp) or 435G SFP. We want convert all roof installations to fiber optics.
 
complete2006
Member Candidate
Member Candidate
Posts: 235
Joined: Tue Feb 07, 2006 7:18 pm

Re: New Products

Fri Mar 11, 2011 9:03 am

Looks like playing LEGO...

"Hmm... Lets see. I have a really good product idear: Take a green one for the 100MBit-Interfaces. Oh we have new blue ones for POE-distribution. I 'll take one of this. Now I want to have one for a metal case and a connected shield for ethernet... Oh, no one there then we will take the white one for the plastic case... = RB750UP"

Why the hell I shielded everything to prevent EMI and terminate the things on a LowCost-Plastic-Router? Please spend a metal case or at least some shield contact to the RJ45 ...

I am realy sorry for this harsh critic (I am a MT-OS fan) but I am really disapointed about the new products. I expected something like RB 1200 with some SFP slots or something new in wireless like GPS sync or FDD 5Gig. Instead I see some new "battle places" like the CPE for FTTH. MT where will you go? Wireless? Professional routing/switching? FTTH?
Eliminate 10 fires at the same time with one tube will not be successfull.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Fri Mar 11, 2011 9:12 am

These devices were prototypes. It will have shielded connectors.
No answer to your question? How to write posts
 
Athan
Frequent Visitor
Frequent Visitor
Posts: 89
Joined: Mon May 31, 2010 2:48 pm

Re: New Products

Fri Mar 11, 2011 9:25 am

Interesting new products; I'm looking forward to try some when available.
BTW I hope the USB ports on new devices being self powered this time... :wink:
Athan
 
Trisc
Member Candidate
Member Candidate
Posts: 242
Joined: Sat May 29, 2004 11:24 pm
Location: Glos, UK

Re: New Products

Fri Mar 11, 2011 11:39 am

RB435G - 9-30v - not 48v? Will that be sufficient for 5 high power cards?
 
complete2006
Member Candidate
Member Candidate
Posts: 235
Joined: Tue Feb 07, 2006 7:18 pm

Re: New Products

Fri Mar 11, 2011 2:03 pm

@normis

Thank you for the info. I can live with shielded connectors and the plastic case. What is about RB1100 or 1200 like device with more than one SFP slot? Are you working on this?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3425
Joined: Mon May 31, 2004 2:55 pm

Re: New Products

Fri Mar 11, 2011 2:39 pm

Interesting new products; I'm looking forward to try some when available.
BTW I hope the USB ports on new devices being self powered this time... :wink:
Yes those are powered USB ports.
 
Athan
Frequent Visitor
Frequent Visitor
Posts: 89
Joined: Mon May 31, 2010 2:48 pm

Re: New Products

Fri Mar 11, 2011 10:25 pm

Yes those are powered USB ports.
Great; Thanks uldis!
Athan
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1819
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: New Products

Fri Mar 11, 2011 11:04 pm

Yes those are powered USB ports.
Sanity has been restored! ;)
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: New Products

Sat Mar 12, 2011 11:14 am

Dear mikrotik..

can be the Wifi product come at least 28dbm RF power or more higher?

if can be something look like ubnt nano m2 such thing will be great..
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New Products

Sat Mar 12, 2011 1:01 pm

LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Sun Mar 13, 2011 10:09 am

Dear mikrotik..

can be the Wifi product come at least 28dbm RF power or more higher?

if can be something look like ubnt nano m2 such thing will be great..
which one? RB751U will be 1W!
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Sun Mar 13, 2011 10:09 am

Come on, it's a sunday, let us rest for a day :)
No answer to your question? How to write posts
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New Products

Sun Mar 13, 2011 11:25 am

ok :) we wait
LAN, FTTx, Wireless. ISP operator
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Sun Mar 13, 2011 8:44 pm

I do like the products that MT has announced as many solve some great problems, but I do have some criticisms.

I wish Mikrotik would stop putting so many mPCI on a single board. Any more than 1 radio per frequency results in a hostile RF environment inside the case. I've got some 411AHs with 5 GHz radios inside a single box, but they're all mounted on separate sheet metal that's perpendicular to the back wall and spaced about 8" apart. There is no direct line of sight between any of the boards and the spacing helps reduce ambient noise.

Also, I was thinking the RB750UP would have been more appropriate as an RB450UP, and a RB490P would be even better yet. Sites where you have many radios need the higher capabilities of the 400 series. Also, a serious operator would have at least 2 backhauls for redundancy, so 6 ports would be needed. I will admit, however, that I'm not certain where the 400 series should end and the 1000 series or an x86 should begin. The RB750UP may be useful to power multiple devices such as cameras, phones, etc. where you don't need a lot of data manipulation or throughput. An RB450UP would probably be the minimal I'd put at a tower where I'd have to contend with various rules.

The RB751x would have been better as an RB751xP (well, a single powered port, anyway). You would then use that single box to power the outdoor CPE.

To build upon what I talked about earlier, maybe the RB1200 is the new best for the standard tower router, though there should be a P option as well. We'll have to see what the 1200's performance ends up being. From what I hear, the 400 series doesn't have the balls for a tower site that has a good amount of traffic and firewall\mangle\etc. rules.

The 1100AHx2 needs SFP ports, plain and simple.

How are people doing Metro-E? Are they doing East - West or just using passive splitters at the curb? Can standard Ethernet cope with passive splitters? That would dictate how that product gets used.

None of the rest of the products really interest me.


Come out with an updated price-performance comparison.
http://routerboard.com/pdf/RouterBOARD_ ... arison.pdf
-----
Mike Hammett

The Brothers WISP
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1819
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: New Products

Mon Mar 14, 2011 4:09 am

No idea about other countries but here:

FTTH deployments are generally Passive Optical (and currently not that common)
FTTB deployments are generally Active Optical (BIDI or some other WDM tech) and generally do not have any redundancy, in the odd occasion when it has been redundant it has been dual fibre with redundancy handled by MPLS.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: New Products

Mon Mar 14, 2011 9:49 am

Dear mikrotik..

can be the Wifi product come at least 28dbm RF power or more higher?

if can be something look like ubnt nano m2 such thing will be great..
which one? RB751U will be 1W!

Hi normis..
can it be the RP-sma female connector for external antenna?
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: New Products

Mon Mar 14, 2011 10:04 am

Dear Normis..

can be the RB750UP power up 5 wireless bridge (RB433AH + R52Hn).?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Mon Mar 14, 2011 10:05 am

input is 24V and output is 600mA per port. You can calculate how much can you power :)
No answer to your question? How to write posts
 
jadu
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sat Feb 05, 2011 9:22 am
Location: Bucharest - Constanta

Re: New Products

Mon Mar 14, 2011 10:07 am

Great new products!
RB750UP great feature "Controllable PoE out" like someone said for power up some IP cameras, great!
I just wait for the RB751U but moreafter the second one RB751G for my home, you read my mind about this product. :D

BUT about RB2011 great rough design, it's missing something... i think making coffee! I don't see the use of the wireless :shock: in this awesome looking rough router. In my country i have too FTTB but FTTH is not accesible for home users like this router is intended to be for.

Although more pro's then con's! :D
------------------------
Don't give thanks, give karma instead!
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: New Products

Mon Mar 14, 2011 10:36 am

input is 24V and output is 600mA per port. You can calculate how much can you power :)
Normis..
in this case, is it depend on the input power?

can we use the 24VDC 3A switching adapter in order to make sure i have sufficient output power for the bridge?

Appreciate for you sharing..
 
jadu
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sat Feb 05, 2011 9:22 am
Location: Bucharest - Constanta

Re: New Products

Mon Mar 14, 2011 11:36 am

input is 24V and output is 600mA per port. You can calculate how much can you power :)
Normis..
in this case, is it depend on the input power?

can we use the 24VDC 3A switching adapter in order to make sure i have sufficient output power for the bridge?

Appreciate for you sharing..
600mA/port means 14,4W at 24v. In the data sheet of the RB433AH maximum power consumption is 25W and 16W to cards.
sorry, if you use just one R52Hn with the RB433AH should be in the limit.
------------------------
Don't give thanks, give karma instead!
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Mon Mar 14, 2011 12:37 pm

Where I can find tech. specs of the new boards ?
 
jadu
Frequent Visitor
Frequent Visitor
Posts: 82
Joined: Sat Feb 05, 2011 9:22 am
Location: Bucharest - Constanta

Re: New Products

Mon Mar 14, 2011 1:10 pm

they are still in development as normis said, we'll have the tech spec soon
------------------------
Don't give thanks, give karma instead!
 
mblanco
just joined
Posts: 21
Joined: Thu Apr 27, 2006 10:56 pm

Re: New Products

Mon Mar 14, 2011 6:19 pm

Wow guys, if you put the price of the RB751, RB751U and RB751G at almost the same price as RB750 or RB750G, I'll buy a lot... I was dreaming about this day long time ago.. lol

The RB2011 is a nice one!!! if I have a lot of time (for testing) I'll use it for fiber connections, I hope the CPU and memory of that one will be great!!

The groove and onmitik will be a great option for change some nanos, and I hope those can will be a/b/g/n, but if they only b/g/n will be nice too, lol

For the RB1100 series, well I need to try one, but you guys have some troubles with that series... so I'm skeptical to use them... maybe someday I'll try one

:D :o :shock:
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Tue Mar 15, 2011 9:02 am

input is 24V and output is 600mA per port. You can calculate how much can you power :)
Normis..
in this case, is it depend on the input power?

can we use the 24VDC 3A switching adapter in order to make sure i have sufficient output power for the bridge?

Appreciate for you sharing..
RB750UP has only ether2 - ether5 as PoE out ports. Ether1 is PoE in port
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: New Products

Tue Mar 15, 2011 11:33 am

input is 24V and output is 600mA per port. You can calculate how much can you power :)
Normis..
in this case, is it depend on the input power?

can we use the 24VDC 3A switching adapter in order to make sure i have sufficient output power for the bridge?

Appreciate for you sharing..
RB750UP has only ether2 - ether5 as PoE out ports. Ether1 is PoE in port


Hi Janisk...
I got what you mean, Ethernet 1 poe in is also the source for the Ether2~5 poe out.

But, the power adapter purchase from Mikrotik is 24VDC 0.8A, when i use it to connect this product and power up 4 other's bridge (connect to eth2~5).

For sure, there is no sufficient output power for it, can i replace the original power adapter purchase from mikrotik with 24Vdc 3A power adapter to provide sufficient power for the bridge.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Tue Mar 15, 2011 11:34 am

if you want to use the power out feature, you must use the 24V power adapter. but if you don't want to use it, you can still take power from PoE. the PoE out feature is optional, you can switch it off
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Tue Mar 15, 2011 12:37 pm

yes, you can use your own 24V 3A power adapter
No answer to your question? How to write posts
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: New Products

Tue Mar 15, 2011 2:13 pm

I'm pretty new to Mikrotik and you guys really suprised me in a very positive way.
Now looking at this new line, I 'm simply speachless! :-)
Keep up the good work, TNX!!!!

B
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: New Products

Tue Mar 15, 2011 11:01 pm

The PoE out options need alot more info guys!

What standard is it going to be based on, If it's not 802.3af then can it be used to power RB4xx with 2 high power cards on each port? If it's 802.3af then it wont be compatible with current RB's so do you plan to release a up-the-pole ethernet splitter to feed non-802.3af devices?

This device will be great for remote sites with 3-4 RB's but it's going to need some power grunt to be useful.
 
popcorrin
Member Candidate
Member Candidate
Posts: 189
Joined: Wed Mar 11, 2009 12:55 am

Re: New Products

Wed Mar 16, 2011 3:41 am

if you want to use the power out feature, you must use the 24V power adapter. but if you don't want to use it, you can still take power from PoE. the PoE out feature is optional, you can switch it off
Are you saying that you must power it via the power jack when utilizing poe out?
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Wed Mar 16, 2011 8:51 am

you can use PEXT or POE to power the POE out router. It is similar to 802.3af except, auto feature will start work with less resistance than set 19KOHM set in standard and it will power 9 to 28V devices.

Limitation is that you have 600mA on port, so if you use 28V PSU you will get 16W on the board, whilst using 10V you get just 6W for the board.

Also - you can turn off POE out, if you know for sure that port does not require power and "on" when you want to power device that auto function is not detecting
 
jcrites2008
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Fri May 02, 2008 10:53 pm

Re: New Products

Wed Mar 16, 2011 7:54 pm

you can use PEXT or POE to power the POE out router. It is similar to 802.3af except, auto feature will start work with less resistance than set 19KOHM set in standard and it will power 9 to 28V devices.

Limitation is that you have 600mA on port, so if you use 28V PSU you will get 16W on the board, whilst using 10V you get just 6W for the board.

Also - you can turn off POE out, if you know for sure that port does not require power and "on" when you want to power device that auto function is not detecting

So basically, you can only output 600mA to the 4 output ports when using a 24v POE. But if you use a higher voltage for the input, then you can output more to the output ports? This could be a harsh limitation. One reason we might use this is to put one up on top of a water tower. Then we could run one cable up to the 750UP and power several devices from that. However, because of the 600mA POE input limitation, we might be able to only power 1 or 2 devices. Is that correct? I suppose you could always hook up a power supply end to the power pins on the ethernet cable.
 
User avatar
warwick09
Member Candidate
Member Candidate
Posts: 190
Joined: Mon Aug 07, 2006 1:34 pm
Location: The Bahamas / Florida

Re: New Products

Wed Mar 16, 2011 7:59 pm

Normis, Janisk


Noticed in the MUM product .pdf a lot of the items say May or Next Month.... (Namely the 711-2hn and Groove) Are we talking "May May, October May or January May" :D

I know it's hard for anyone to give a circa or near circa date but any info in terms of shipping on the above items would be appreciated and great.

I'm sure others here would find the info useful as well...

Regards
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu Mar 17, 2011 7:38 am

May usually means the fifth month of the year :) This is when distributors should start getting it.
No answer to your question? How to write posts
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Thu Mar 17, 2011 8:50 am

600mA is per port. Higher the voltage at same current you get more power. So, if you use 24V PSU each attached board will get up to 14.4W
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: New Products

Thu Mar 17, 2011 11:58 am

Is that enough to drive a RB4xx with 2 high power cards stably?
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Thu Mar 17, 2011 12:50 pm

it was intended to power small devices, something like RB411 with high power card, SXT etc.

(usually one high power card consumes around 7W at MAX consumption)
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: New Products

Thu Mar 17, 2011 2:10 pm

it was intended to power small devices, something like RB411 with high power card, SXT etc.

(usually one high power card consumes around 7W at MAX consumption)
Hi Mikrotik, i believe most of us is more happy if This product can power on 4 unit RB411AH with high power wireless card for more efficient wireless network performance.

Wish to have a good news from you soon.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Thu Mar 17, 2011 2:48 pm

it should be able to do so with 24V PSU

edit: power consumption of boards can be checked at routerboard.com
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: New Products

Thu Mar 17, 2011 10:25 pm

it was intended to power small devices, something like RB411 with high power card, SXT etc.

(usually one high power card consumes around 7W at MAX consumption)
So whats the point of this unit then? It's more useful to your client base to be able to power a site from it thats running 4 x RB4xx with multiple cards in each. Something you can't do with this product. I can think of a dozen different uses for this device in infrastructure and very few on the client side. Just like the RB2011 MT fails to understand it's clients again. Most of us dont need a SFP slot on a CPE we need a SFP slot on a high power router
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1819
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: New Products

Thu Mar 17, 2011 11:29 pm

Whats with all the negativity.

All these products are a step forward for Mikrotik, some like the SXT, Groove and 2011 are a huge step forward.

Sure, they may not perfectly meet everyone's requirements but they have been designed to reach a mass market by meeting most peoples needs and being affordable.


It's also good to see Mikrotik are making products for three distinct market segments "Engineered Embedded", "Integrated Solutions" and "Indoor & Rackmount".

I still hold hope for a Cavium based "core" router from Mikrotik to allow us to use Mikrotik in environments that are currently Cisco and Juniper territory, but for now i'll take what I can get.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Fri Mar 18, 2011 8:04 am

we are also working on many other products, it's just that not all of them are ready to announce yet.
No answer to your question? How to write posts
 
complete2006
Member Candidate
Member Candidate
Posts: 235
Joined: Tue Feb 07, 2006 7:18 pm

Re: New Products

Fri Mar 18, 2011 10:55 am

I would like to see a 7xx "mast-mount-reday-device" with selectable routing or switching mode. With grounding & ESD-protection, space and connector for backup battery. Looking at Ubiquiti sucess story your will mention that the time for "hand-hammered"-solutions is over in many countries. From my point of view I would pay more or this device cause I will save a lot of time and I am faster in base station setup...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Fri Mar 18, 2011 11:11 am

isn't that SXT you are talking about? :) It's basically an outdoor RB711 with shielded ethernet and mast mount
No answer to your question? How to write posts
 
JorgeAmaral
Trainer
Trainer
Posts: 199
Joined: Wed Mar 04, 2009 11:53 pm
Location: /ip route add type=blackhole

Re: New Products

Sat Mar 19, 2011 2:43 am

we are also working on many other products, it's just that not all of them are ready to announce yet.
Hum...

I like this. More to come, but for this year?
 
w0lt
Member
Member
Posts: 484
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: New Products

Sat Mar 19, 2011 5:02 am

Normis,
I believe the RB1200 has an additional serial port. Maybe others, like the RB800, but is it possible to have a DB9 connector knock-out fabricated on the back case in the production models? All you really need is that, a ribbon cable and idc connector and a bulkhead db9 connector, right. So a little knock-out would work great.
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
User avatar
warwick09
Member Candidate
Member Candidate
Posts: 190
Joined: Mon Aug 07, 2006 1:34 pm
Location: The Bahamas / Florida

Re: New Products

Sat Mar 19, 2011 9:23 am

Normis, Janisk

One last question...


Are we to expect a 2Ghz Version of the Groove the same time the 5Ghz version ships? ......... Getting tired of putting 2.4ghz client systems together.


Pigtail + Jumper Cable/Barrel Adapter + Bulky Enclosure + Enlarged mounting Pole = :evil: (PITA)
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Sat Mar 19, 2011 4:12 pm

it was intended to power small devices, something like RB411 with high power card, SXT etc.

(usually one high power card consumes around 7W at MAX consumption)
So whats the point of this unit then? It's more useful to your client base to be able to power a site from it thats running 4 x RB4xx with multiple cards in each. Something you can't do with this product. I can think of a dozen different uses for this device in infrastructure and very few on the client side. Just like the RB2011 MT fails to understand it's clients again. Most of us dont need a SFP slot on a CPE we need a SFP slot on a high power router

As I stated earlier, multiple cards in each radio just isn't a good idea. The 2011 may have a place once I figure out a fiber model that will work in a limited fiber count environment. You are correct, though, that MT needs something akin to the RB1100AHx2 with nothing but SFP ports. Hopefully this product will come in their next product release. What else are you going to hook the 2011 to now but an expensive Cisco or Juniper switch?
-----
Mike Hammett

The Brothers WISP
 
InoX
Forum Guru
Forum Guru
Posts: 1962
Joined: Tue Jan 09, 2007 6:44 pm

Re: New Products

Sat Mar 19, 2011 10:16 pm

RB750UP is kind of useless if you have gigabit at the base like me :D One port should be gigabit. I keep seeing all kind of soho products from mikrotik. I will keep making my own poe switches till I'm old. I have 5 links over 100mbps each and gigabit fiber on my tower. It seems that mikrotik is making products for those that offer 512kbps rates service and 20mbps(5x4mbps adsl lines) backhaul for 500 customers. Anyway a tplink switch with management and sfp + 8x100mpbs is only 50$. So why should we bother with an underpowered RB750UP? It will have a share of the market still.
 
User avatar
warwick09
Member Candidate
Member Candidate
Posts: 190
Joined: Mon Aug 07, 2006 1:34 pm
Location: The Bahamas / Florida

Re: New Products

Wed Mar 23, 2011 12:31 am

Normis, Janisk

One last question...


Are we to expect a 2Ghz Version of the Groove the same time the 5Ghz version ships? ......... Getting tired of putting 2.4ghz client systems together.


Pigtail + Jumper Cable/Barrel Adapter + Bulky Enclosure + Enlarged mounting Pole = :evil: (PITA)


I know you guys are busy across the Atlantic but I'll live with a simple yes or no ...

:2Ghz version of the Groove around May? :)
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Wed Mar 23, 2011 8:13 am

Sorry, no. We will start by Groove 5Ghz.
No answer to your question? How to write posts
 
Trisc
Member Candidate
Member Candidate
Posts: 242
Joined: Sat May 29, 2004 11:24 pm
Location: Glos, UK

Re: New Products

Mon Mar 28, 2011 1:22 pm

As I stated earlier, multiple cards in each radio just isn't a good idea.
What's wrong with it? We've been doing it for years - no problem.
 
jcem
Member Candidate
Member Candidate
Posts: 137
Joined: Sun May 24, 2009 4:41 pm
Location: Grebbestad, Sweden

Re: New Products

Mon Mar 28, 2011 1:36 pm

Same here - no problem!!

RB800 & RB/604 & 3R52nM & 3R52Hn

Crowded but it's been up running for 6months now.

Todays CPU 50°C and ambient air 5°C

RGDS
You do not have the required permissions to view the files attached to this post.
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Mon Mar 28, 2011 2:50 pm

As I stated earlier, multiple cards in each radio just isn't a good idea.
What's wrong with it? We've been doing it for years - no problem.

Noise.
-----
Mike Hammett

The Brothers WISP
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: New Products

Tue Mar 29, 2011 2:07 am

We run 2 or 3 card setups and find that the high power cards dont like to play nicely but it works and you can do things to help avoid issues. You'd be crazy on a 10+ antenna site to run RB's for each radio
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Tue Mar 29, 2011 4:32 am

We run 2 or 3 card setups and find that the high power cards dont like to play nicely but it works and you can do things to help avoid issues. You'd be crazy on a 10+ antenna site to run RB's for each radio
That is exactly what I would do.
-----
Mike Hammett

The Brothers WISP
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Tue Mar 29, 2011 2:39 pm

Some of the devices listed on PDF are going to be released in April but specs are still not available. Could you please publish it ?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Tue Mar 29, 2011 2:46 pm

All information that we can share is available already. When new products will be released, full specs will become available. Which specs exactly are you interested in?
No answer to your question? How to write posts
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Tue Mar 29, 2011 2:49 pm

RB750UP, RB751-2n and RB751U
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Tue Mar 29, 2011 2:56 pm

those are products. I asked about specs
No answer to your question? How to write posts
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Tue Mar 29, 2011 2:59 pm

CPU, RAM, RouterOS licence level, RX sensitivity, TW power
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Tue Mar 29, 2011 3:06 pm

did you read the presentation PDF ?
No answer to your question? How to write posts
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Tue Mar 29, 2011 3:08 pm

Yes. None of the parameters i'm interested in is mentioned there.

Image
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Tue Mar 29, 2011 3:15 pm

on the previous slide it's written that it's the same as RB750 just with wireless
No answer to your question? How to write posts
 
jcrites2008
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Fri May 02, 2008 10:53 pm

Re: New Products

Tue Mar 29, 2011 6:49 pm

Normis,

Do you know what the operating temperature is on the rb750up?

Thanks.
 
User avatar
THG
Member
Member
Posts: 472
Joined: Thu Oct 15, 2009 1:05 am

Re: New Products

Sun Apr 03, 2011 4:43 pm

Wow guys, if you put the price of the RB751, RB751U and RB751G at almost the same price as RB750 or RB750G, I'll buy a lot... I was dreaming about this day long time ago.. lol
I wonder if the price of RB751 can match Ubiquiti Networks AirRouter?
 
w0lt
Member
Member
Posts: 484
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: New Products

Sun Apr 03, 2011 8:18 pm

Hey, how about changing the DB-9 serial connector to a RJ-45 configured the same way as Cisco so I only have to keep one serial cable that's common throughout the industry...

-tp
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
fewi
Forum Guru
Forum Guru
Posts: 7734
Joined: Tue Aug 11, 2009 3:19 am

Re: New Products

Sun Apr 03, 2011 8:28 pm

Hey, how about changing the DB-9 serial connector to a RJ-45 configured the same way as Cisco so I only have to keep one serial cable that's common throughout the industry...

-tp
That would be nice. Not so much for the connector as I carry a serial cable anyway, but because you can extend roll over consoles with copper ethernet cables. Awesome for gear that's mounted in a hard to reach location - run an additional network cable and you have console access without having to be within 50 ft of the equipment.
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
 
w0lt
Member
Member
Posts: 484
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: New Products

Sun Apr 03, 2011 10:07 pm

Hey, how about changing the DB-9 serial connector to a RJ-45 configured the same way as Cisco so I only have to keep one serial cable that's common throughout the industry...

-tp
That would be nice. Not so much for the connector as I carry a serial cable anyway, but because you can extend roll over consoles with copper ethernet cables. Awesome for gear that's mounted in a hard to reach location - run an additional network cable and you have console access without having to be within 50 ft of the equipment.
Well I guess that would be a Win-Win for all then. !!
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1819
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: New Products

Mon Apr 04, 2011 12:48 am

and surely RJ45 sockets are cheaper than DB9's these days
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Mon Apr 04, 2011 6:19 am

If you ask this question, it means you have yet to see the MUM product presentation
No answer to your question? How to write posts
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1819
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: New Products

Mon Apr 04, 2011 9:07 am

I have and the RB435G, RB1110AHx2, RB1200 all appear to have DB9. The only one I cannot tell is the RB2011
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
warwick09
Member Candidate
Member Candidate
Posts: 190
Joined: Mon Aug 07, 2006 1:34 pm
Location: The Bahamas / Florida

Re: New Products

Sat Apr 09, 2011 5:25 am

may is soon here... 8)

:arrow: Groove, 711-2hn
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Sat Apr 09, 2011 6:12 am

I have and the RB435G, RB1110AHx2, RB1200 all appear to have DB9. The only one I cannot tell is the RB2011
yes that's right, RB2011 will have that connector
No answer to your question? How to write posts
 
User avatar
warwick09
Member Candidate
Member Candidate
Posts: 190
Joined: Mon Aug 07, 2006 1:34 pm
Location: The Bahamas / Florida

Re: New Products

Tue Apr 12, 2011 12:11 am

Anyone know of a distributor stocking any of the new products? ... or am I asking too early?
 
jcrites2008
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Fri May 02, 2008 10:53 pm

Re: New Products

Tue Apr 12, 2011 7:28 pm

http://roc-noc.com has had RB1100AH's for quite awhile now. At least that's what it says on their website.
 
Misty
just joined
Posts: 3
Joined: Fri Feb 04, 2011 6:25 pm

Re: New Products

Wed Apr 13, 2011 4:20 am

Is the upcoming RB1200 10x 10gbps ports or 10x 1gbps ports?
If its 10gbps ports I am highly excited!

Thanks.
 
w0lt
Member
Member
Posts: 484
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: New Products

Wed Apr 13, 2011 4:33 am

Is the upcoming RB1200 10x 10gbps ports or 10x 1gbps ports?
If its 10gbps ports I am highly excited!

Thanks.
I believe it is 10x, 1Gb capable ports..
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Thu Apr 14, 2011 3:13 pm

I believe it is 10x, 1Gb capable ports..
this is the case.
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Tue Apr 19, 2011 12:01 pm

April coming to an end. Where's the new boards promised for this month ?
 
User avatar
roc-noc.com
Forum Veteran
Forum Veteran
Posts: 869
Joined: Sun Dec 02, 2007 3:27 am
Location: Rockford, IL USA
Contact:

Re: New Products

Tue Apr 19, 2011 1:13 pm

April coming to an end. Where's the new boards promised for this month ?
We now have RB435G in stock, SXT in stock, and a few RB1100AH left in stock (we have been selling them for over 1 month).

RB1200 coming in about a week.

More products should be coming in May.

Give them a chance. They are pedaling as fast as they can. :)

Tom
-----------------------------------------------
http://www.roc-noc.com
Tom, CCNA, ISP, USA Mikrotik Distributor
888-762-5662
-----------------------------------------------
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Tue Apr 19, 2011 1:30 pm

How about RB751-2n and RB751U ?
 
User avatar
warwick09
Member Candidate
Member Candidate
Posts: 190
Joined: Mon Aug 07, 2006 1:34 pm
Location: The Bahamas / Florida

Re: New Products

Wed Apr 20, 2011 9:43 am

April coming to an end. Where's the new boards promised for this month ?
We now have RB435G in stock, SXT in stock, and a few RB1100AH left in stock (we have been selling them for over 1 month).

RB1200 coming in about a week.

More products should be coming in May.

Give them a chance. They are pedaling as fast as they can. :)

Tom
Excellent, well please do note when you receive the 711-2hn's in stock, along with the groove.
 
Misty
just joined
Posts: 3
Joined: Fri Feb 04, 2011 6:25 pm

Re: New Products

Fri Apr 22, 2011 8:00 am

I believe it is 10x, 1Gb capable ports..
I believe it is 10x, 1Gb capable ports..

Such a shame.
Why does Mikrotik have this phobia against releasing 10gbps hardware?
It disappoints me to think that I will have to move away from the Mikrotik brand to get 10gbps.
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: New Products

Fri Apr 22, 2011 8:36 am

Do you need 10gbit of routing or just the link interface, Given that MT's having issues with the RB1100's pushing gbit levels of traffic I doubt we'll see a 10gbit router out of them any time soon, in the mean time if you just need the link interface then buy a SFP switch and hook a RB800/RB1100AH/x86 router to it
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Fri May 06, 2011 3:09 am

Within 1.5 years I'll need 10 gigabit interfaces. The core would need to route at least 40 gigabits of throughput. That's about 10x the currently available MT interfaces and almost 10x the currently available x86 router capacity.
-----
Mike Hammett

The Brothers WISP
 
OpiumDream
newbie
Posts: 30
Joined: Fri May 22, 2009 6:44 am

Re: New Products

Fri May 06, 2011 7:00 am

Are you seriously expecting that vendor which is oriented on very low cost mass deployment hardware, will make a core routing systems with cost 500$ or even 5000$ ? Capable of 40g :)
If you are a carrier go buy juniper or cisco for core routing.
Why everyone here is complaining that Mikrotik does not do this does not do that …..
What are you expecting from such a small company? They are doing affordable, extremely low cost equipment, about 10 times cheaper then same class equipment from competitors…
Not everything at once :)
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Fri May 06, 2011 3:17 pm

Many WISPs are starting to join the big boys club.

I have been using Mikrotik products since the RB500 series, so I have been there with everyone else. Many opportunities will start to develop for me soon because of the relationships that I've forged when building my WISP.

I wouldn't consider the type of router mentioned above as a carrier router. A carrier router in my book would have 100GigE interfaces and support terabits of throughput.
-----
Mike Hammett

The Brothers WISP
 
OpiumDream
newbie
Posts: 30
Joined: Fri May 22, 2009 6:44 am

Re: New Products

Fri May 06, 2011 7:27 pm

You want that kind of router from Mikrotik with cost 6k ? :)
Are sure that you will buy Mikrotik router capable of 100g which will cost 1 million or even more? You will not!! So stop complaining and use MT equipment where it’s suitable.
Mikrotik is perfect solution for small ISPs or any size WISP, they are also gaining share in enterprise market. I have customers with 300 RB/750Gs used for branch offices, it’s perfect for this purpose.
 
rzirzi
Member
Member
Posts: 378
Joined: Mon Oct 09, 2006 2:33 pm

Re: New Products

Sat May 07, 2011 10:14 am

Sorry, no. We will start by Groove 5Ghz.
WHEN? Normis - when it wil be available?!
 
mstead
Member Candidate
Member Candidate
Posts: 113
Joined: Sat Mar 04, 2006 2:41 am

Re: New Products

Sat May 07, 2011 7:40 pm

Can we get a status update on the Groove please. What is the estimated timescale on this product and will it have a similar price model to the Ubiquiti Bullet.

Thanks
 
w0lt
Member
Member
Posts: 484
Joined: Wed Apr 02, 2008 2:12 pm
Location: Minnesota USA

Re: New Products

Sat May 07, 2011 8:32 pm

Can we get a status update on the Groove please. What is the estimated timescale on this product and will it have a similar price model to the Ubiquiti Bullet.

Thanks

I would like the status of the OmniTik !! :-) :-)
MTCNA - 2011

" The Bitterness of Poor Quality Remains Long After the Sweetness of Low Price is Forgotten "

Image
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Mon May 09, 2011 10:19 am

Groove is still on track, for this month.
No answer to your question? How to write posts
 
User avatar
roc-noc.com
Forum Veteran
Forum Veteran
Posts: 869
Joined: Sun Dec 02, 2007 3:27 am
Location: Rockford, IL USA
Contact:

Re: New Products

Mon May 09, 2011 4:16 pm

That would be a pleasant surprise.

Tom
-----------------------------------------------
http://www.roc-noc.com
Tom, CCNA, ISP, USA Mikrotik Distributor
888-762-5662
-----------------------------------------------
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Mon May 09, 2011 4:22 pm

How about RB751U ? Wasn't it supposed to be released in April ?
 
mstead
Member Candidate
Member Candidate
Posts: 113
Joined: Sat Mar 04, 2006 2:41 am

Re: New Products

Mon May 09, 2011 5:29 pm

Groove is still on track, for this month.
Thank you for that. I will keep my eyes open.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Tue May 10, 2011 8:20 am

How about RB751U ? Wasn't it supposed to be released in April ?
this is the corrected release shedule:
http://www.mikrotik.com/download/share/generic.pdf
No answer to your question? How to write posts
 
markom
Member Candidate
Member Candidate
Posts: 105
Joined: Thu Dec 17, 2009 10:42 pm

Re: New Products

Tue May 10, 2011 1:37 pm

and.... of course no ADSL modem integrated. First on the list for years and no solution for adsl router with wifi. I am little disappointed. http://wiki.mikrotik.com/wiki/RouterBOA ... re_Request
 
rzirzi
Member
Member
Posts: 378
Joined: Mon Oct 09, 2006 2:33 pm

Re: New Products

Wed May 11, 2011 8:45 am

How about RB751U ? Wasn't it supposed to be released in April ?
this is the corrected release shedule:
http://www.mikrotik.com/download/share/generic.pdf
Most of them: "available in May". What month is it?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Wed May 11, 2011 9:14 am

and what month will it be in 2 weeks?
No answer to your question? How to write posts
 
blacky
newbie
Posts: 27
Joined: Sat Sep 18, 2010 8:28 pm

Re: New Products

Thu May 12, 2011 11:40 am

Our distributor in Germany has listed the Groove but not in stock yet.

With 64MB and L4: 58 EUR
http://shop.meconet.de/artikeldet.php?p ... i5vfc6f0h4

with 32MB and L3: 45 EUR
http://shop.meconet.de/artikeldet.php?p ... i5vfc6f0h4

Greets

Sven
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Fri May 13, 2011 1:14 am

There was mention of a RB750 with PoE out. RB75UP or RB750P, I've seen different references to this product.

When can we expect it?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Fri May 13, 2011 7:34 am

There was mention of a RB750 with PoE out. RB75UP or RB750P, I've seen different references to this product.

When can we expect it?
http://www.mikrotik.com/download/share/generic.pdf
No answer to your question? How to write posts
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Fri May 13, 2011 9:36 am

Thank you Normis.

Now for the big question: Will the RJ45 connectors be shielded, or will they be unshielded as in the picture?
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: New Products

Fri May 13, 2011 6:22 pm

normunds..

can be the poe switch have separate watch dog, it can monitor the devices connected to that port, and when it not able to reach that unit, it can be only reboot on that particular port.

if this can be, it will be wonderful, and when is the actual date for us to place order as we been waiting it...

appreciate for you feedback..
 
lazerusrm
Member Candidate
Member Candidate
Posts: 162
Joined: Sat Jan 29, 2011 7:56 am

Re: New Products

Mon May 16, 2011 4:57 am

normunds..

can be the poe switch have separate watch dog, it can monitor the devices connected to that port, and when it not able to reach that unit, it can be only reboot on that particular port.

if this can be, it will be wonderful, and when is the actual date for us to place order as we been waiting it...

appreciate for you feedback..
READ the document by Normunds. should be JUNE of 2011. Probably late June / Early July when be able to get one.

all release dates are in the .PDF ....
 
rzirzi
Member
Member
Posts: 378
Joined: Mon Oct 09, 2006 2:33 pm

Re: New Products

Thu May 19, 2011 8:57 am

Groove is still on track, for this month.
So - we are still waiting, and... waiting... and...
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu May 19, 2011 8:59 am

ask distributors, they already have full specs, prices and delivery times !
No answer to your question? How to write posts
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Fri May 20, 2011 5:29 am

You want that kind of router from Mikrotik with cost 6k ? :)
Are sure that you will buy Mikrotik router capable of 100g which will cost 1 million or even more? You will not!! So stop complaining and use MT equipment where it’s suitable.
Mikrotik is perfect solution for small ISPs or any size WISP, they are also gaining share in enterprise market. I have customers with 300 RB/750Gs used for branch offices, it’s perfect for this purpose.

$6K? Seems like a good deal for a 10x 10GigE router. $1m is excessive for that other router.

I'm glad MT does what they do, but a lot of WISPs are putting on their big boy pants. At that point someone has to go to Cisco or Juniper.
-----
Mike Hammett

The Brothers WISP
 
blacky
newbie
Posts: 27
Joined: Sat Sep 18, 2010 8:28 pm

Re: New Products

Fri May 20, 2011 11:22 pm

Hi, i just found a new Mikrotik product. Its the RG/750GL

Here is the link: http://shop.meconet.de/artikeldet.php?p ... tub3mefaa1

Is this a replacement for the RB750G? How is the performance? IT has double RAM but only 400MHz CPU for the same price.
 
jcrites2008
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Fri May 02, 2008 10:53 pm

Re: New Products

Wed May 25, 2011 1:41 am

Hi, i just found a new Mikrotik product. Its the RG/750GL

Here is the link: http://shop.meconet.de/artikeldet.php?p ... tub3mefaa1

Is this a replacement for the RB750G? How is the performance? IT has double RAM but only 400MHz CPU for the same price.

I found this on streakwave as well. They have the datasheet for it. I bet this will make some people happy and some people not so happy. http://www.streakwave.com/ItemDesc.asp?ic=RB%2F750GL
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 735
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: New Products

Wed May 25, 2011 2:22 am

The most useful stat is a higher MTU.
-----
Mike Hammett

The Brothers WISP
 
ditonet
Forum Veteran
Forum Veteran
Posts: 839
Joined: Mon Oct 19, 2009 12:52 am
Location: Europe/Poland/Konstancin-Jeziorna
Contact:

Re: New Products

Wed May 25, 2011 11:09 pm

RB750G was removed from http://routerboard.com/
So it looks that 750GL is replacement for 750G.
Slower CPU but more memory and additional powered USB port.
IMHO ideal product for SOHO market.

Regards,
Grzegorz | MTCNA, MTCRE, MTCSE | konsultacje MikroTik Warszawa
It is a book about a Spanish guy called Manual. You should read it. - Dilbert
 
User avatar
THG
Member
Member
Posts: 472
Joined: Thu Oct 15, 2009 1:05 am

Re: New Products

Thu May 26, 2011 5:54 am

It's still there.

RB750G

http://www.routerboard.com/product/90
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu May 26, 2011 7:56 am

RB750G was removed from http://routerboard.com/
So it looks that 750GL is replacement for 750G.
Slower CPU but more memory and additional powered USB port.
IMHO ideal product for SOHO market.

Regards,
it doesn't have USB
No answer to your question? How to write posts
 
rjickity
Member Candidate
Member Candidate
Posts: 212
Joined: Sat Jul 17, 2010 10:40 am
Location: Perth, Australia

Re: New Products

Thu May 26, 2011 9:22 am

My RB1200's have been sent out today. I can't wait to test them out !
Does anyone have a link to the pdf of the new products? The ones in this thread are not currently working for me.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu May 26, 2011 9:36 am

links have been fixed
No answer to your question? How to write posts
 
ditonet
Forum Veteran
Forum Veteran
Posts: 839
Joined: Mon Oct 19, 2009 12:52 am
Location: Europe/Poland/Konstancin-Jeziorna
Contact:

Re: New Products

Thu May 26, 2011 10:14 am

@normis
ditonet wrote:
RB750G was removed from http://routerboard.com/
So it looks that 750GL is replacement for 750G.
Slower CPU but more memory and additional powered USB port.
IMHO ideal product for SOHO market.

Regards,


it doesn't have USB
So why USB port is visible on photo on routerboard.com and is also mentioned in Quick User Guide?
rb750gl_usb.JPG
Please, don't make people fool :D and fix documentation.
BTW, with USB this RB will be much better.

Regards,
You do not have the required permissions to view the files attached to this post.
Grzegorz | MTCNA, MTCRE, MTCSE | konsultacje MikroTik Warszawa
It is a book about a Spanish guy called Manual. You should read it. - Dilbert
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu May 26, 2011 10:36 am

This was a mistake. Actual specifications are in the brochure and product page. We have fixed the quickguide.
No answer to your question? How to write posts
 
ditonet
Forum Veteran
Forum Veteran
Posts: 839
Joined: Mon Oct 19, 2009 12:52 am
Location: Europe/Poland/Konstancin-Jeziorna
Contact:

Re: New Products

Thu May 26, 2011 11:24 pm

Thanks for explanation and documentation fix.
I've changed my RB750GL rating from 'ideal' to 'pretty good' :D

Regards,
Grzegorz | MTCNA, MTCRE, MTCSE | konsultacje MikroTik Warszawa
It is a book about a Spanish guy called Manual. You should read it. - Dilbert
 
Mosfet
just joined
Posts: 1
Joined: Thu May 05, 2011 10:21 pm

Re: New Products

Fri May 27, 2011 11:23 am

@normis
In the photo of RB750GL board is present a usb connector. I think it is a mistake too.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Fri May 27, 2011 11:28 am

sorry about that
No answer to your question? How to write posts
 
EgyCom
Member Candidate
Member Candidate
Posts: 123
Joined: Thu May 31, 2007 9:47 pm

Re: New Products

Sat Jun 04, 2011 10:57 am

When will RB711-2Hn be available ??
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Sat Jun 04, 2011 12:03 pm

What is the current availability for the RB750UP ?
 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: New Products

Tue Jun 07, 2011 7:34 pm

this is the corrected release shedule:
http://www.mikrotik.com/download/share/generic.pdf
Why have all the dates been removed from that file? Are they no longer on track for the June releases?
 
BMWGuinness
newbie
Posts: 25
Joined: Wed Mar 17, 2010 4:29 pm

Re: New Products

Wed Jun 08, 2011 12:23 am

this is the corrected release shedule:
http://www.mikrotik.com/download/share/generic.pdf
When should we see the RB1100AHx2 available in the US?
 
User avatar
Neohunter
just joined
Posts: 22
Joined: Fri Jun 10, 2011 8:54 am

Re: New Products

Fri Jun 10, 2011 9:27 am

Hello

I have some questions about RB751U and RB751G
(i viewed http://www.mikrotik.com/download/share/generic.pdf)
BUT
do you can write what difference between RB751U and RB751G
and also do you can describe more detailed hardware characteristics for RB751U and RB751G
(processors, memory, wifi chip and other ?)

Another question - USB port can be used as backup 3g wan link (for 3g usb modem) ?
And do you plane in future make new version RB751G + build-in 3G modem as one of WAN interface(WAN 1 - Gb Ethr POE, WAN 2 - 3G ) -it would be great!
 
User avatar
roc-noc.com
Forum Veteran
Forum Veteran
Posts: 869
Joined: Sun Dec 02, 2007 3:27 am
Location: Rockford, IL USA
Contact:

Re: New Products

Sun Jun 12, 2011 8:36 pm

this is the corrected release shedule:
http://www.mikrotik.com/download/share/generic.pdf
Why have all the dates been removed from that file? Are they no longer on track for the June releases?
I think that is a safe bet.
When will RB711-2Hn be available ??
I am told that this one might possibly make it out this month (June). The other Atheros based new products July or August.
When should we see the RB1100AHx2 available in the US?
Late this year on both RB1100AH and RB1100AHx2. More shortages at Freescale. Remember the RB1100 delays? Be happy that the RB1200 PPC comes from a different source.

Tom
-----------------------------------------------
http://www.roc-noc.com
Tom, CCNA, ISP, USA Mikrotik Distributor
888-762-5662
-----------------------------------------------
 
BMWGuinness
newbie
Posts: 25
Joined: Wed Mar 17, 2010 4:29 pm

Re: New Products

Mon Jun 13, 2011 7:14 pm

Late this year on both RB1100AH and RB1100AHx2. More shortages at Freescale. Remember the RB1100 delays? Be happy that the RB1200 PPC comes from a different source.

Tom
So the best RB solution for a Level 6 licensed rackmount with flash storage allowance at this time is the RB1100?
 
User avatar
roc-noc.com
Forum Veteran
Forum Veteran
Posts: 869
Joined: Sun Dec 02, 2007 3:27 am
Location: Rockford, IL USA
Contact:

Re: New Products

Tue Jun 14, 2011 3:52 pm

Late this year on both RB1100AH and RB1100AHx2. More shortages at Freescale. Remember the RB1100 delays? Be happy that the RB1200 PPC comes from a different source.

Tom
So the best RB solution for a Level 6 licensed rackmount with flash storage allowance at this time is the RB1100?
I think you are correct there.

The RB1100 has a microSD slot. The RB1200 does not. Both do have onboard flash so it depends what you mean by flash storage.

There are also MFM third party rack mount solutions using RB450G and RB493G routerboards and both of these have microSD flash slots. The RB493G also has a USB socket. Both come with Level 5 licenses.

Tom
-----------------------------------------------
http://www.roc-noc.com
Tom, CCNA, ISP, USA Mikrotik Distributor
888-762-5662
-----------------------------------------------
 
BMWGuinness
newbie
Posts: 25
Joined: Wed Mar 17, 2010 4:29 pm

Re: New Products

Tue Jun 14, 2011 6:31 pm

Late this year on both RB1100AH and RB1100AHx2. More shortages at Freescale. Remember the RB1100 delays? Be happy that the RB1200 PPC comes from a different source.

Tom
So the best RB solution for a Level 6 licensed rackmount with flash storage allowance at this time is the RB1100?
I think you are correct there.

The RB1100 has a microSD slot. The RB1200 does not. Both do have onboard flash so it depends what you mean by flash storage.

There are also MFM third party rack mount solutions using RB450G and RB493G routerboards and both of these have microSD flash slots. The RB493G also has a USB socket. Both come with Level 5 licenses.

Tom
Hmm, I think I'll wait ... Is a L6 license transferable if purchased seperately?

I have an RB450G and an ESXi server, I could load a RouterOS VM and install the L6 License and use it for my needs, then when the RB1100AHx2 comes out, I would not have need for the VM, so it would be nice to transfer the purchased L6 to the RB450G.

Also if I have 1 RouterOS VM active, and 1 cold backup, could I utilize the same license as long as I don't have both up and running at the same time, or would I still need 2 licenses?

Yes, MicroSD is what I was referring to, I was thinking about utilization of Web Caching and Metarouter.
 
User avatar
elgo
Member Candidate
Member Candidate
Posts: 151
Joined: Sat Apr 02, 2011 2:34 am
Location: France

Re: New Products

Tue Jun 14, 2011 7:36 pm

The most useful stat is a higher MTU.
Is there any plan for a gigabit router (450G-like) supporting jumbo frames? I mean, seriously, a Gb network device that is limited to 1500 mtu :D
RB450G - OpenWrt (so much more stable than with routerOS)
-> now: UBNT EdgeRouter Lite

(very unlikely to be MT customer again in the future)
 
User avatar
roc-noc.com
Forum Veteran
Forum Veteran
Posts: 869
Joined: Sun Dec 02, 2007 3:27 am
Location: Rockford, IL USA
Contact:

Re: New Products

Wed Jun 15, 2011 4:28 am

Hmm, I think I'll wait ... Is a L6 license transferable if purchased seperately?

I have an RB450G and an ESXi server, I could load a RouterOS VM and install the L6 License and use it for my needs, then when the RB1100AHx2 comes out, I would not have need for the VM, so it would be nice to transfer the purchased L6 to the RB450G.

Also if I have 1 RouterOS VM active, and 1 cold backup, could I utilize the same license as long as I don't have both up and running at the same time, or would I still need 2 licenses?

Yes, MicroSD is what I was referring to, I was thinking about utilization of Web Caching and Metarouter.
Licenses cannot be transferred around. They stay with the device that they are installed on. However, you can move an x86 license to another x86 box by moving the hard drive, or flash drive that it was installed on. That is one of the reasons to install an license on a reliable medium like flash drive.

I'm not a big fan of web caching on flash SD drives. I think hard drives make a better solution right now.

Tom
-----------------------------------------------
http://www.roc-noc.com
Tom, CCNA, ISP, USA Mikrotik Distributor
888-762-5662
-----------------------------------------------
 
dnyl
Frequent Visitor
Frequent Visitor
Posts: 54
Joined: Thu Jan 07, 2010 2:57 am
Location: Budapest, Hungary
Contact:

Re: New Products

Wed Jun 15, 2011 4:57 pm

When RB751U available?
 
User avatar
jgellis
Member Candidate
Member Candidate
Posts: 138
Joined: Wed May 30, 2007 10:57 am
Location: USA

Re: New Products

Wed Jun 15, 2011 7:22 pm

Will any of the new RB products (specifically the 1100AHx2) support balance-alb ? If so, will it be on all interfaces, or will only some of them support it?
- If I helped you solve your problem... I am now able to accept tax-deductible Karma donations!
 
Perun
just joined
Posts: 1
Joined: Sat Feb 12, 2011 3:15 am

Re: New Products

Fri Jun 24, 2011 3:32 am

When RB751U available?
This.
 
domi
just joined
Posts: 3
Joined: Fri Feb 26, 2010 11:25 am

Re: New Products

Sun Jun 26, 2011 6:15 pm

i have a wish :-D
routerboard 450G with mini pci and powered usb for 3g or more storage
can mikrotik/routerboard carry into effect ?
maybe with a new product

rb751g, if it will have 400 mhz cpu and 32/64mb ram is not really what i want

thanks
 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: New Products

Sun Jun 26, 2011 9:28 pm

i have a wish :-D
routerboard 450G with mini pci and powered usb for 3g or more storage
can mikrotik/routerboard carry into effect ?
maybe with a new product

rb751g, if it will have 400 mhz cpu and 32/64mb ram is not really what i want

thanks
You do not want the RB751G specifically because it has 400mhz and 23/64mb ram? That has nothing to do with minipci and usb. The RB751G has usb. It doesn't have minipci, but it has a powerful 802.11n radio built in.
 
User avatar
zervan
Member
Member
Posts: 324
Joined: Fri Aug 20, 2010 10:43 pm
Location: Slovakia
Contact:

Re: New Products

Wed Jun 29, 2011 5:43 pm

Could you specify when RB751 will come, please?
I'd like to buy few of them to a school as hotspot nodes before next school year starts (september) - will it be available or should I look for something else? I hope RB751 will be cheaper than RB411 + wireless card + other necessary accessories :)
Dusan Zervan from Slovakia
MTCNA, MTCRE
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New Products

Fri Jul 01, 2011 12:58 pm

Normis when rb711 5HnD ?
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Fri Jul 01, 2011 2:05 pm

Normis when rb711 5HnD ?
what is that? we don't have such product
No answer to your question? How to write posts
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: New Products

Fri Jul 01, 2011 6:45 pm

Normis,

according to hu11.pdf:
Image

Today is the 1st of July. So my question is do you plan to release 711U in April 2012 ?
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New Products

Fri Jul 01, 2011 6:56 pm

Why not show RB711 5HnD ? Several times I wrote about this product but always has been deleted.

I hope you DONT delete this post.
http://ispforum.cz/download/file.php?id=1077

SXT is good, but we need a dual rb711
Thank Normis
LAN, FTTx, Wireless. ISP operator
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1819
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: New Products

Sat Jul 02, 2011 4:33 am

Why not show RB711 5HnD ? Several times I wrote about this product but always has been deleted.
At a guess, I would say that it is because Mikrotik operates in a competitive market and do not want their competitors to find out about future products before they are in production.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: New Products

Sat Jul 02, 2011 5:05 am

I'd say the cat's out of the bag when random forum user #349783435 knows about it :P
 
DJHiP
just joined
Posts: 20
Joined: Wed Dec 08, 2010 12:21 am

Re: New Products

Sat Jul 02, 2011 9:28 am

Why not show RB711 5HnD ? Several times I wrote about this product but always has been deleted.

I hope you DONT delete this post.
http://ispforum.cz/download/file.php?id=1077

SXT is good, but we need a dual rb711
Thank Normis
We just make our own :D

Image
Air-Stream Community Wireless Network - Adelaide, Australia
[RB711A - 3KM - 11.7MB/s TCP throughput]
[Groove5hn - 3KM - 10.5MB/s TCP throughput]
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New Products

Sat Jul 02, 2011 1:26 pm

Why not show RB711 5HnD ? Several times I wrote about this product but always has been deleted.

I hope you DONT delete this post.
http://ispforum.cz/download/file.php?id=1077

SXT is good, but we need a dual rb711
Thank Normis
We just make our own :D
Quite expensive production :)
LAN, FTTx, Wireless. ISP operator
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Mon Jul 04, 2011 8:34 am

Why not show RB711 5HnD ? Several times I wrote about this product but always has been deleted.

I hope you DONT delete this post.
http://ispforum.cz/download/file.php?id=1077

SXT is good, but we need a dual rb711
Thank Normis
it's not our picture, and we don't have such product at the moment. it's photoshopped, so somebody is playing a joke on you.

I'm not denying that we will make something like this in the future, but the product you are posting all the time - it's fake.
No answer to your question? How to write posts
 
User avatar
honzam
Forum Guru
Forum Guru
Topic Author
Posts: 2287
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: New Products

Mon Jul 04, 2011 10:09 am

In that case, I apologize. But it was presented in one Czech ISPs store.
Dual RB711 would be really useful. When SXT produce it would not be a problem ...
LAN, FTTx, Wireless. ISP operator
 
jandafields
Forum Guru
Forum Guru
Posts: 1514
Joined: Mon Sep 19, 2005 6:12 pm

Re: New Products

Tue Jul 05, 2011 4:46 pm

On that subject, is there any update on when the 751U will be available?

The last official word from mikrotik was "April"
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Wed Jul 06, 2011 8:44 am

On that subject, is there any update on when the 751U will be available?

The last official word from mikrotik was "April"
This summer
No answer to your question? How to write posts
 
oeyre
Member Candidate
Member Candidate
Posts: 118
Joined: Wed May 27, 2009 12:48 pm

Re: New Products

Thu Jul 07, 2011 12:54 pm

I am extremely interested in the RB2011.
  • Any idea on the release date?
  • What L2MTU can be expected?
  • What throughputs/performance can be expected?
  • Will it have OAM capabilities?
  • Will there be a non wireless version?
 
andrewmodus
just joined
Posts: 1
Joined: Thu Jul 07, 2011 3:53 pm

Re: New Products

Thu Jul 07, 2011 4:13 pm

normis, There is no any information on RB/SXT-2HnD?
So many people are waiting for news ....
 
lvpoker
just joined
Posts: 11
Joined: Mon Jun 21, 2010 11:19 pm

Re: New Products

Wed Jul 13, 2011 6:05 am

RB750UP was promised for May shipping, right? There have been no updates from MT in the last two months. Are we talking August, September?

I hate the idea of putting more money into Tycon Power switches to light up additional sites. But I need to be doing this in the summer with full foliage.

Can Mikrotik please give some semblance of when this product will ship?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Wed Jul 13, 2011 9:16 am

current estimate for Rb750UP is August
No answer to your question? How to write posts
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Wed Jul 13, 2011 9:27 am

current estimate for Rb750UP is August
Thank you Normis.
 
oeyre
Member Candidate
Member Candidate
Posts: 118
Joined: Wed May 27, 2009 12:48 pm

Re: New Products

Wed Jul 13, 2011 10:29 am

I am extremely interested in the RB2011.
  • Any idea on the release date?
  • What L2MTU can be expected?
  • What throughputs/performance can be expected?
  • Will it have OAM capabilities?
  • Will there be a non wireless version?
Also, will it be AC or DC power supply?

Will there be redundant power possible?
 
User avatar
dallas
Long time Member
Long time Member
Posts: 547
Joined: Wed Dec 13, 2006 4:13 am
Location: Minnesota
Contact:

Re: New Products

Mon Jul 18, 2011 7:18 pm

I hoped to see the SXT 20dB antenna in list.
It would be perfect! sigh :(
Yes a higher dbi antenna would be nicer.
Cell# 507-383-8012
dallasweitzel @ gmail.com
Network and RF engineer
Traffic Engineer
Dallas Weitzel
 
ilnicchio
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Sun May 28, 2006 6:11 pm

Re: New Products

Tue Jul 19, 2011 10:36 pm

will be in the future something like this?
[*]2 or more Gbit ethernet interface with at least 1526 byte L2MTU
[*]1 minipci port (or 1 integrated 802.11n MiMo radio module normal or H version)
[*]no moving part (so no fan)
[*]around $200 price
We thinks that this is what a professional wisp need to have today to provide a good internet service to it's customers...

Will be also a fiber version?... no I don't wan't ask too much! ;-)

Good work!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Wed Jul 20, 2011 8:18 am

will be in the future something like this?
[*]2 or more Gbit ethernet interface with at least 1526 byte L2MTU
[*]1 minipci port (or 1 integrated 802.11n MiMo radio module normal or H version)
[*]no moving part (so no fan)
[*]around $200 price
We thinks that this is what a professional wisp need to have today to provide a good internet service to it's customers...

Will be also a fiber version?... no I don't wan't ask too much! ;-)

Good work!
here it is: http://routerboard.com/RB435G
No answer to your question? How to write posts
 
User avatar
infowest
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Thu Jun 07, 2007 12:46 am

750UP

Thu Jul 21, 2011 11:48 pm

I sure hope you guys make it by August for the RB/750UP. A couple questions if you can answer them Normis (or whoever):

- Will it have the 400mhz processor speed, or the faster RB750G-style processor?
- Will it have a higher temperature rating like the RB750GL?
- Will it have a 30V DC tolerance, or just 28V?

thanks!

Randy
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Fri Jul 22, 2011 2:44 pm

RB750UP will have 400MHz CPU
It will work with 28V PSU, as that is not max limit.
 
User avatar
infowest
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Thu Jun 07, 2007 12:46 am

Re: New Products

Fri Jul 22, 2011 9:23 pm

Will it work above 28v then, which we often need in solar sites?
 
wirelessguy1
just joined
Posts: 17
Joined: Tue Mar 01, 2011 5:43 pm

Re: New Products

Wed Jul 27, 2011 2:32 am

This RB750UP should have DC block input terminal.

Running a long cable going to POE IN and supplying the other port (POE out) would strain the solid AWG24. Its cheaper to run a single cable from your room to the roof and short cable connected to ether2 to ether5 to power any POE device.

Can it be sold without the Adaptor?? :)

I prefer putting the DC source near that RB.

wirelessguy1
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: New Products

Wed Jul 27, 2011 1:36 pm

Will it work above 28v then, which we often need in solar sites?
about what voltage you are talking about? If you are powering 7series or 4 series RouterBOARD from that solar panel, RB750GL will definitely work.

And i can answer only some technical details, as i have no information about how they are going to be sold and what package will include.
 
hapi
Member Candidate
Member Candidate
Posts: 223
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: New Products

Wed Jul 27, 2011 2:39 pm

will RB750UP metal connectors for ESD shielding? To put to use shielded cable cat5e.

Currently you have no protection against surges Ethernet ports. Very bad.

Ubiquiti client currently supplies kit that is protected against ESD. SXT gets plastic POE. What?
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Wed Jul 27, 2011 3:18 pm

Ubiquiti client currently supplies kit that is protected against ESD. SXT gets plastic POE. What?
+1.

I feel your pain.

To add insult to injury, when we compare performance of SXT with UBNT Nano M5 or UBNT AirGrid we see the UBNT kill the routerboard every time with it comes to throughput. My new pops look like the attachment. RB for connecting to existing MT backbone, RB750 for running hotspot etc, but UBNT rockets facing the customers.

It breaks my heart doing this, but I'd rather be broken hearted with money in the bank than have a happy heart and no customers.
IMG_2822 (Medium).JPG
You do not have the required permissions to view the files attached to this post.
Last edited by eben on Wed Jul 27, 2011 3:41 pm, edited 1 time in total.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Wed Jul 27, 2011 3:25 pm

eben, what? it's common knowledge that mikrotik nv2 outperforms ubnt devices by a good margin, even the AFMUG Backhaul Bakeoff proved that: http://www.dslreports.com/forum/r253380 ... E~start=20
Results are on page 9 and 12 of the PowerPoint slide pack. Roughly double the performance of a Rocket.
No answer to your question? How to write posts
 
hapi
Member Candidate
Member Candidate
Posts: 223
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: New Products

Wed Jul 27, 2011 3:42 pm

and ESD? will ever be supported by you? I have to buy another one bracket, and other PoE to SXT. That's a lot more money on. The first time a storm damaged the RB.
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Wed Jul 27, 2011 3:46 pm

eben, what? it's common knowledge that mikrotik nv2 outperforms ubnt devices by a good margin, even the AFMUG Backhaul Bakeoff proved that: http://www.dslreports.com/forum/r253380 ... E~start=20
Results are on page 9 and 12 of the PowerPoint slide pack. Roughly double the performance of a Rocket.
It's time you guys have a MUM in Cape Town so that people like Eugenevdm and I can take you into real world scenarios and show you how the products perform "in the wild".
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Wed Jul 27, 2011 3:47 pm

and ESD? will ever be supported by you? I have to buy another one bracket, and other PoE to SXT. That's a lot more money on. The first time a storm damaged the RB.
most of our products have 12-16kV ESD protection on both ethernet and RF ports.
No answer to your question? How to write posts
 
hapi
Member Candidate
Member Candidate
Posts: 223
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: New Products

Wed Jul 27, 2011 5:05 pm

what products?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu Jul 28, 2011 8:30 am

most of the products! SXT, OmniTIK, RB700 series etc. it's all in their brochures.
No answer to your question? How to write posts
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Thu Jul 28, 2011 9:32 am

rzirzi

You must use shielded cable. UBNT Toughcable is really good stuff.

The next thing that you must do is to take the shield / ground on the shielded cable to ground. If you are using UBNT PoE injectors (and the building has been correctly earthed) and properly terminated shielded cable, this is easy. However, if you are using MikroTik or TPLink PoE injectors, it's not that simple.

We solder an earth wire onto the shield on the PoE injector that we then take to ground ie to an earth point.
IMG_2854 (Medium).JPG
In this specific case, shielded cable will run from the PoE injectors to the client facing equipment while there's UTP inside the case. The RB750 doesn't have shielded connectors, so it's actually pointless running shielded cable those last couple of cm.
IMG_2855 (Medium).JPG
You do not have the required permissions to view the files attached to this post.
 
User avatar
eben
Member
Member
Posts: 479
Joined: Mon Feb 16, 2009 8:37 pm
Location: Somerset West, South Africa
Contact:

Re: New Products

Thu Jul 28, 2011 9:34 am

... a direct strike will destroy the device...
Two rules that I follow:

1. If it gets struck by ligthning - even if it's still working - ewaste and replace.
2. If it's been burned in a fire - even if it's still working - ewaste and replace.
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: New Products

Thu Jul 28, 2011 9:36 am

We suffer from the same problem where ethernet ports fry after storms, recently down under we've had 6 units fry their Ethernet and this is professionally installed and grounded :) Not from direct strikes but from strikes within a couple of km's from the CPE
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu Jul 28, 2011 9:50 am

by the way, also check this, it's important:
http://wiki.mikrotik.com/wiki/Manual:Wi ... d_antennas
No answer to your question? How to write posts
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24212
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: New Products

Thu Jul 28, 2011 10:17 am

I'm not buying them. People buy them, and they could stop you know? You can eat bread with butter and ham or only with butter. As easy as that.
RB711 is one of our most successful products, and we sell it worldwide in very large numbers.

If you do have any issues, please contact support and we will try to help you in your specific case.

http://forum.mikrotik.com/faq.php
No answer to your question? How to write posts

Who is online

Users browsing this forum: No registered users and 15 guests