Page 1 of 1

10GHz miniPCI

Posted: Wed Oct 05, 2011 10:46 am
by und3ath
Is it possible to use RouterOS / Routerboard with some 10GHz cards? Do they even exists? Or is Mikrotik planning some 10GHz cards?

Re: 10GHz miniPCI

Posted: Wed Oct 05, 2011 10:54 am
by normis
no / no / no

Re: 10GHz miniPCI

Posted: Wed Oct 05, 2011 10:58 am
by und3ath

Re: 10GHz miniPCI

Posted: Wed Oct 05, 2011 11:00 am
by normis
i think it's an external converter, not a true 10GHz device

Re: 10GHz miniPCI

Posted: Wed Oct 05, 2011 11:05 am
by und3ath
i think it's an external converter, not a true 10GHz device
I am only thinking, what to use for ptp links instead of 5GHz. Now I have 5GHz ptp links, but clients are also in 5GHz frequency spectrum. And I wanna to separate it a little. And also gain a better speed / latency.

Re: 10GHz miniPCI

Posted: Wed Oct 05, 2011 3:33 pm
by rodolfo
use different polarization for your customer and for point to point

Re: 10GHz miniPCI

Posted: Wed Oct 05, 2011 3:40 pm
by und3ath
use different polarization for your customer and for point to point

My ptp links are H pol and also both pol V&H, clients are V ....

Re: 10GHz miniPCI

Posted: Fri Dec 23, 2011 4:55 am
by saintofinternet
no / no / no

normis.... what is this company offering? >>> http://www.idearf.com/

is that true 10GHz based on Mikrotik? would be wonderful to find out.

Re: 10GHz miniPCI

Posted: Fri Dec 23, 2011 8:14 am
by normis
Like I said before, RouterOS sees that card as 2 or 5GHz, but it actually transmits at 10GHz. It has some converter inside. Basically you achieve the same result, so I guess you can use it.

Re: 10GHz miniPCI

Posted: Fri Dec 23, 2011 1:15 pm
by saintofinternet
Like I said before, RouterOS sees that card as 2 or 5GHz, but it actually transmits at 10GHz. It has some converter inside. Basically you achieve the same result, so I guess you can use it.
same result???
>>> same speeds as 5GHz ???
>>> same performance as 5GHz ???
>>> how will RouterOS keep the bandwidth ration??? ( for 5GHz or 10GHz )

what would you personally recommend normis? should one offer such a system or no? i mean not as an user but as an integrator

Re: 10GHz miniPCI

Posted: Fri Dec 23, 2011 1:17 pm
by normis
RouterOS sees it as a 5Ghz card, so all speeds, specifications and capabilities are the same as any other 5GHz card, just the actual carrier frequency will be 10GHz. I have no experience with such converters, so I can't say much.

Re: 10GHz miniPCI

Posted: Fri Dec 23, 2011 9:06 pm
by Matess
yes, but it is only in one polarization, or too expensive.