Community discussions

MUM Europe 2020
 
troy
Member
Member
Topic Author
Posts: 309
Joined: Thu Jun 30, 2005 6:47 pm

ETA on RB2011?

Fri Nov 18, 2011 11:19 pm

I'm curious to know the ETA on the 2011. We're very interested in deploying this as the CPE on our FTTH project, and likely as an option for customers on the wireless side of the house.

Thanks,

-Troy
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Mon Nov 21, 2011 1:20 pm

First few modifications will ship in december, so end users can hope for holidays, or early january. see last few slides here: http://mum.mikrotik.com/presentations/US11/us11.pdf
No answer to your question? How to write posts
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 222
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: ETA on RB2011?

Tue Nov 22, 2011 12:41 pm

Is it possible to know what level of performances we can expect from this routerboard? Which is the closest between RB750, RB1200, RB1100AH? Or is it completely different? Can it route 1Gb/s of traffic from the sfp port to the rest? Even with 750bytes packets?

Greetings!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Tue Nov 22, 2011 3:19 pm

Is it possible to know what level of performances we can expect from this routerboard? Which is the closest between RB750, RB1200, RB1100AH? Or is it completely different? Can it route 1Gb/s of traffic from the sfp port to the rest? Even with 750bytes packets?

Greetings!
SFP and the Gigabit ports are connected to the same switch chip, so wire-speed throughput will be possible (full 1Gbit). CPU Performance will be better than RB435G
No answer to your question? How to write posts
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 222
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: ETA on RB2011?

Tue Dec 13, 2011 2:35 am

I'm drooling waiting for RB2011 to be released.... :)
 
Nattmannen
just joined
Posts: 2
Joined: Thu Oct 27, 2011 4:35 pm

Re: ETA on RB2011?

Wed Dec 14, 2011 10:03 pm

Same here.

Also wondering about what price range it will land in.

Sounds perfect for me.
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Thu Dec 15, 2011 9:38 pm

I would like to pre-order one.

However I have few questions:
1. This one is not a real question, but I hope USB hole will look better than shown on the picture (pdf file).
2. There is LCD mentioned instead of LEDs for the model shown on the picture. Is that a typo or you seriously plan to include an LCD? LCD is nice to have, but not a critical issue if you deliver it with standard LED-s.
3. CPU architecture: Would it be mipsbe, mipsle, ppc or x86? The cheapest and most likely solution is Atheros 7161, but you stated that it would be faster than RB435G which uses Atheros 7161. Also it takes too long to develop this product so you are probably doing something new. That makes me think of something which is missing from your product line for a longer time. AMD Geode or VIA c3/Nano or something else which is cheap and scalable to create a brand new line of high end products. Intel Atom would be welcome too, but it wouldn't be a cheap and low end product. :lol:
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Fri Dec 16, 2011 8:06 am

1. better how? it's not a regular USB port, it's microUSB.
2. yes, there are plans to have a LCD panel, to monitor some stats on the rackmount unit front panel
3. mips-be different family
No answer to your question? How to write posts
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Fri Dec 16, 2011 7:06 pm

I have no problems with microUSB itself, but
- connector is deep inside; it's not aligned to the line where SFP and Eth ports are. Yes I know it's a different type of connector and it's much smaller/ shorter than Ethernet ports.
- due to the connector being deep you make a big and ugly hole for it. There should be a solution to resolve this design issue.
- Is there a specific reason why you decided to go with MicroUSB instead of regular USB connector? Standard one is bigger, longer and probably won't cause this issue...

Rest of the things are all good news for me.

Thanks.
 
fmenard123
Member Candidate
Member Candidate
Posts: 100
Joined: Sat Aug 02, 2008 6:43 am

Re: ETA on RB2011?

Sat Dec 17, 2011 6:22 am

Where is the SFP port on the rackmount version ?

F.
 
rviteri
Frequent Visitor
Frequent Visitor
Posts: 84
Joined: Fri Nov 18, 2011 5:53 pm

Re: ETA on RB2011?

Sat Dec 17, 2011 11:01 am

Will openwrt meta router be stable on this device?
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Sun Dec 18, 2011 1:45 am

It's there almost on all versions except on the L-RM one which is on the picture. So we can assume L = Light.

Where is the SFP port on the rackmount version ?

F.
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: ETA on RB2011?

Tue Dec 20, 2011 3:52 pm

First few modifications will ship in december, so end users can hope for holidays, or early january. see last few slides here: http://mum.mikrotik.com/presentations/US11/us11.pdf
December coming to an end. Are you still expecting to release few modifications of RB2011 this year?
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Wed Dec 28, 2011 7:55 pm

The only reason why we though release date will be in December 2011 is the name of the router "RB 2011". There is a big silence around this equipment. I wouldn't be surprised if we would need to wait until next December :(

Another think I suspect is that this "low cost" router wouldn't be so cheap. I would vote for a price between RB493G and RB1200. I hope it will be closer to 493G
First few modifications will ship in december, so end users can hope for holidays, or early january. see last few slides here: http://mum.mikrotik.com/presentations/US11/us11.pdf
December coming to an end. Are you still expecting to release few modifications of RB2011 this year?
Last edited by mtmx80 on Wed Dec 28, 2011 11:15 pm, edited 1 time in total.
 
walterkeen
just joined
Posts: 7
Joined: Mon Mar 28, 2011 6:25 pm

Re: ETA on RB2011?

Wed Dec 28, 2011 9:28 pm

We're anxiously waiting for a Mikrotik with a SFP port, This looks like it would be perfect, but even better if we can use Metarouter with it.
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Fri Dec 30, 2011 11:43 am

This is last working day in the year. I wish Happy new year to MikroTik and lot of great new devices for next year.

It would be great new year gift to 'leak' few infos about this new router to make it possible for us to decide if it's worth for waiting for RB2011 or it's better to invest to something else like RB493G, RB1200 or something better.
 
fmenard123
Member Candidate
Member Candidate
Posts: 100
Joined: Sat Aug 02, 2008 6:43 am

Re: ETA on RB2011?

Fri Dec 30, 2011 3:42 pm

I have big plans for RB's with SFP ports.

I'd like for the RB2011 to at least be disclosed in 2011... before they turn into RB2012's.

Like how many models will have an SFP port ? And which will be the form factors ?
And will there be an 'embeddable' router board with an SFP port that I can disguise inside my magic box.

F.
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Fri Dec 30, 2011 5:45 pm

There is some information about it:
L LS US US-2HnD
Type Board Board Desktop Board
SFP - + + +
USB - - + +
WLAN - - - +
Serial - - + +
LCD - - + +

L (Board) 5 Gbit + 5 FastEthernet ports, no other features
LS (Board) L +SFP
US (Desktop) LS +Serial port and LCD
US-2HnD (Board) US +WLAN
RM - 1U Rackmount models
IN - Indoor/desktop models

For example RB2011US-2HnD-IN. Currently 7 variants
planned to release gradually from December to February.


I have big plans for RB's with SFP ports.

I'd like for the RB2011 to at least be disclosed in 2011... before they turn into RB2012's.

Like how many models will have an SFP port ? And which will be the form factors ?
And will there be an 'embeddable' router board with an SFP port that I can disguise inside my magic box.

F.
 
fmenard123
Member Candidate
Member Candidate
Posts: 100
Joined: Sat Aug 02, 2008 6:43 am

Re: ETA on RB2011?

Fri Dec 30, 2011 6:20 pm

Ah!

From:

L (Board) 5 Gbit + 5 FastEthernet ports, no other features
LS (Board) L +SFP
US (Desktop) LS +Serial port and LCD
US-2HnD (Board) US +WLAN

Now I read that the LS model is

A Routerboard, with 5 GigE and 5 Fast-E, that is embeddable and which has an SFP port on it.

Does it have a serial port ?

Is it the same board than in the US model ?

Are all RB2011 variants all built on the same L board + SFP model ?

I can definitely see myself buying a truckload of LS devices ;)

F.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Mon Jan 02, 2012 8:34 am

The L models don't have any serial, the non-L models have cisco style serial on the back. I'm sorry that we couldn't make it until the promised end of 2011, but the devices are really nearly ready, we have been testing them internally for a while now.
No answer to your question? How to write posts
 
ropebih
Member Candidate
Member Candidate
Posts: 109
Joined: Tue May 22, 2007 5:35 pm

Re: ETA on RB2011?

Sun Jan 08, 2012 11:56 am

Does RB2011 have ESD on ethrnet?
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1827
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: ETA on RB2011?

Sun Jan 08, 2012 1:21 pm

More importantly does it support DDMI to the inserted SFP ?
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: ETA on RB2011?

Mon Jan 09, 2012 12:03 pm

it is module feature. if your module works with SFP then everything should be fine. The other and has to support that as well.
 
ropebih
Member Candidate
Member Candidate
Posts: 109
Joined: Tue May 22, 2007 5:35 pm

Re: ETA on RB2011?

Mon Jan 09, 2012 1:42 pm

about ESD???
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Mon Jan 09, 2012 1:44 pm

about ESD???
all our products have ESD Protection
No answer to your question? How to write posts
 
ropebih
Member Candidate
Member Candidate
Posts: 109
Joined: Tue May 22, 2007 5:35 pm

Re: ETA on RB2011?

Mon Jan 09, 2012 2:02 pm

great, thanks for reply.
 
fmenard123
Member Candidate
Member Candidate
Posts: 100
Joined: Sat Aug 02, 2008 6:43 am

Re: ETA on RB2011?

Mon Jan 09, 2012 2:30 pm

How about SFP DDMI output ?

F.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1827
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: ETA on RB2011?

Tue Jan 10, 2012 12:25 am

it is module feature. if your module works with SFP then everything should be fine. The other and has to support that as well.
I think you misunderstood my question.

If the module supports DDMI will the RB2011 display the information in Winbox/CLI and be able to poll it via SNMP ?

Specifically the A0h, A2h information e.g. Temperature, Vendor Name, Media Type, TX Power, RX Power and the alarms
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Tue Jan 17, 2012 1:31 am

Hi,

A lot of new devices was released today. Are there any news regarding RB2011? Are specifications become final and public?
 
Beccara
Long time Member
Long time Member
Posts: 606
Joined: Fri Apr 08, 2005 3:13 am

Re: ETA on RB2011?

Wed Jan 18, 2012 12:58 am

What devices have been released?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Wed Jan 18, 2012 8:04 am

RB751U-2HnD
RB411L
RB433GL
R5SHPn
RB433L
RB751G-2HnD
OmniTikUPA-5HnD
RB433UAHL
No answer to your question? How to write posts
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: ETA on RB2011?

Wed Jan 18, 2012 9:13 am

RB751U-2HnD
RB411L
RB433GL
R5SHPn
RB433L
RB751G-2HnD
OmniTikUPA-5HnD
RB433UAHL
Dear Normund...
possible to consider the 12 POE output and 2 uplink POE switch with all using same switch chip?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Wed Jan 18, 2012 9:15 am

Dear Normund...
possible to consider the 12 POE output and 2 uplink POE switch with all using same switch chip?
I don't understand?
No answer to your question? How to write posts
 
mtmx80
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Wed Mar 16, 2011 11:12 pm

Re: ETA on RB2011?

Tue Jan 24, 2012 10:31 am

Hi,

Can you please update us about ETA of RB2011? I'm not asking for exact date, but need to know what to expect. - Should I wait for this or buy something else. It's quite urgent for me. If you can't confirm it will arrive until the middle of February I have no other choice, I need to look for different model. Price / Performance infos would be welcome too - If it's possible.
 
nik247
Frequent Visitor
Frequent Visitor
Posts: 61
Joined: Fri Jan 16, 2009 1:00 pm
Location: Ukraine, Kyiv

Re: ETA on RB2011?

Wed Jan 25, 2012 12:56 pm

Hi,

Can you please update us about ETA of RB2011? I'm not asking for exact date, but need to know what to expect. - Should I wait for this or buy something else. It's quite urgent for me. If you can't confirm it will arrive until the middle of February I have no other choice, I need to look for different model. Price / Performance infos would be welcome too - If it's possible.
+1
 
laurinkus
Member Candidate
Member Candidate
Posts: 100
Joined: Thu Aug 31, 2006 5:05 pm
Location: Europe

Re: ETA on RB2011?

Thu Feb 02, 2012 1:00 am

For example RB2011US-2HnD-IN. Currently 7 variants
planned to release gradually from December to February.
It's February already.
 
troy
Member
Member
Topic Author
Posts: 309
Joined: Thu Jun 30, 2005 6:47 pm

Re: ETA on RB2011?

Thu Mar 01, 2012 7:57 pm

Now it's March...
 
Beone
Member Candidate
Member Candidate
Posts: 243
Joined: Fri Feb 11, 2011 1:11 pm

Re: ETA on RB2011?

Thu Mar 01, 2012 9:55 pm

What are the RAM/CPU specs of the RB2011?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24422
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: ETA on RB2011?

Fri Mar 02, 2012 8:30 am

Now it's March...

It's been announced to distributors, check local store.
No answer to your question? How to write posts
 
DiabolixZA
newbie
Posts: 38
Joined: Wed Jul 06, 2011 5:06 pm

Re: ETA on RB2011?

Fri Mar 02, 2012 10:43 am

Is there any place I can get detailed information on the different models, and how they will look.

The Rackmount with the LCD sounds intresting!

Who is online

Users browsing this forum: No registered users and 16 guests