Community discussions

MUM Europe 2020
 
syadnom
Member
Member
Topic Author
Posts: 407
Joined: Thu Jan 27, 2011 7:29 am

Omnitik in 2.4Ghz?

Sun Apr 08, 2012 8:44 am

I would love to see an omnitik in 2.4Ghz. I am currently using the 751u but I have industrial environments and the omnitik is a better fit (if it was 2.4Ghz). Also, I would love to have the omnitiks antennas over the 751u. High output power in the 751u is useless to me with such low gain antennas.
 
User avatar
acim
Member
Member
Posts: 424
Joined: Mon Sep 12, 2005 12:26 am
Location: Serbia
Contact:

Re: Omnitik in 2.4Ghz?

Sun Apr 08, 2012 5:03 pm

Me too :wink:
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24366
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Omnitik in 2.4Ghz?

Tue Apr 10, 2012 9:22 am

useless to me with such low gain antennas
one chain you can replace with much larger gain antenna, as the device has a MMCX connector.
No answer to your question? How to write posts
 
syadnom
Member
Member
Topic Author
Posts: 407
Joined: Thu Jan 27, 2011 7:29 am

Re: Omnitik in 2.4Ghz?

Tue Apr 10, 2012 4:43 pm

useless to me with such low gain antennas
one chain you can replace with much larger gain antenna, as the device has a MMCX connector.
Thanks normis. The outdoor enclosure of the omnitik is also highly desirable.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24366
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Omnitik in 2.4Ghz?

Wed Apr 11, 2012 8:30 am

What about the Groove then? Use any antenna, and it has an outdoor enclosure. It's also very small.
No answer to your question? How to write posts
 
syadnom
Member
Member
Topic Author
Posts: 407
Joined: Thu Jan 27, 2011 7:29 am

Re: Omnitik in 2.4Ghz?

Wed Apr 11, 2012 5:19 pm

the groove doesn't have a built in switch. I could use an omnitik 2.4Ghz as a soho router in my industrial environments with high gain dual polarity antennas.

I can put something together to do this but I would need a 493 + enclosure + wireless card + 2 antennas which is easily $238. Additionally, the OmniTIK is designed to mount to just about anything quickly and easily where a metal boxed 493 would be a little more effort and still wouldn't be as tough.

The OmniTIK 5Ghz is $89, so if a 2.4Ghz was similar the savings would be quite good.

I would also add that an OmniTIK is auto-WDS and HWMP+ in 2.4Ghz would make a nice little mesh node too.
 
happydaddy
Member Candidate
Member Candidate
Posts: 145
Joined: Thu May 24, 2007 12:18 am

Re: Omnitik in 2.4Ghz?

Mon Apr 16, 2012 1:49 am

+1

I am using 5ghz ubiquity as backbone and mikrotik RB433 as hotspot and routing. Save me efforts of making up a routerboard wirelesscards, lmr cable, antennas etc.

Please make a 2.4 if possible.
 
cristianogoulart
just joined
Posts: 1
Joined: Wed Feb 06, 2013 10:45 am

Re: Omnitik in 2.4Ghz?

Wed Feb 06, 2013 10:48 am

Brazil also requests a Omnitik at 2.4Ghz.
The two antennas may have 10dBi or 12dBi.
Would be a great product!
 
osvaldotcf
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Mon Feb 04, 2013 7:26 pm

Re: Omnitik in 2.4Ghz?

Thu Feb 07, 2013 10:21 am

Brazil also requests a Omnitik at 2.4Ghz.
The two antennas may have 10dBi or 12dBi.
Would be a great product!
With 8 dbi would be great.
It would be a great competitor for the Ubiquiti Unifi.
 
petercolt
just joined
Posts: 1
Joined: Tue Feb 12, 2013 4:23 pm

Re: Omnitik in 2.4Ghz?

Tue Feb 12, 2013 4:25 pm

With 8 dbi would be great.
It would be a great competitor for the Ubiquiti Unifi.
And it may easily win the competition, actually

Who is online

Users browsing this forum: No registered users and 10 guests