Community discussions

 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

metal 5shpn PTP channel width 20/40 above or belwo ?

Sat Sep 15, 2012 11:50 pm

hi i need the best setting for my link . i need 40 mbit peer second at least

21 miles ptp link with two 31dbi dish + metal 5shpn on both side vertical

1-what the best 20/40 above or below can someone clear thing to me ?
2- what is the best setting on both side



thanx
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Sun Sep 16, 2012 1:57 pm

no replay i thought that !!!
 
InoX
Forum Guru
Forum Guru
Posts: 1962
Joined: Tue Jan 09, 2007 6:44 pm

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Sun Sep 16, 2012 2:53 pm

Did you even bother to set up the link?
Did you even bother to search for a tutorial?
Of course not.
Work first, ask questions later.
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Sun Sep 16, 2012 11:27 pm

ok thank u for your awesome answer !!!! i've been work to setup my link for 2 week now and i done .

i needed help my station side reseive 40 m but my station tx is bad ccq for tx 3 to 10%


Image
 
InoX
Forum Guru
Forum Guru
Posts: 1962
Joined: Tue Jan 09, 2007 6:44 pm

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Mon Sep 17, 2012 12:26 am

So we must to guess that...
Btw why do you use 6040Mhz?
Most antennas don't work very well in that frequency.
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Mon Sep 17, 2012 1:03 am

ok her is another change i turned multicast helper to full

on both side tx ccq become better know 60%

and this is a pic of my setting

see if there is any wrong with my setting

Image
Image
 
gnuttisch
Member
Member
Posts: 309
Joined: Fri Sep 10, 2010 3:49 pm

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Mon Sep 17, 2012 1:01 pm

set the same freq and choose same above ore below on them both.

Why do you use that freq? do the antennas support that ?
 
karlos
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Sun Jan 16, 2011 10:46 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Tue Sep 18, 2012 9:55 am

I think your setting is wrong. If you select Frequency 6040MHz you need to add this frequency on other side to Scan List. -79/-75dB is not a good signal level. We like to see -50 to -55dB as perfect link and to -61dB as acceptable link. Everything over 70dB is wrong for us.
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Tue Sep 18, 2012 11:32 am

ok thanks guys . because i can't get better signal for that distant 35 k i removed my link to near tower 24 k .
and thanks for correcting my wrong setting i will fix that .



peace
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Wed Sep 19, 2012 12:07 am

after remove my link the distant 24 kmeter
signal 43/45 ccq 100/100 perfect link

Image
 
User avatar
cbrown
Trainer
Trainer
Posts: 1839
Joined: Thu Oct 14, 2010 8:57 pm
Contact:

metal 5shpn PTP channel width 20/40 above or belwo ?

Wed Sep 19, 2012 12:47 am

43/45 is actually too strong. You should turn down your power a bit on both sides.
C.Brown

cbrown[at]ravenrocknetworks.com
MTCNA - MTCRE - MTCWE - MTCTCE
MTCSE - TRAINER-0179

Next Training
https://www.cbrown.co/2019/04/08/mtcna-june2019-wv/
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Wed Sep 19, 2012 12:50 am

43/45 is actually too strong. You should turn down your power a bit on both sides.
i have metal 5shpn set on the default value (ithink its 31 dbm ) how much i should set it ?
 
User avatar
cbrown
Trainer
Trainer
Posts: 1839
Joined: Thu Oct 14, 2010 8:57 pm
Contact:

metal 5shpn PTP channel width 20/40 above or belwo ?

Wed Sep 19, 2012 12:54 am

Turn it down a couple db at a time until you are in the mid 50s. Are you using NV2?
C.Brown

cbrown[at]ravenrocknetworks.com
MTCNA - MTCRE - MTCWE - MTCTCE
MTCSE - TRAINER-0179

Next Training
https://www.cbrown.co/2019/04/08/mtcna-june2019-wv/
 
InoX
Forum Guru
Forum Guru
Posts: 1962
Joined: Tue Jan 09, 2007 6:44 pm

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Wed Sep 19, 2012 1:25 am

use nv2 for wireless protocol.
 
User avatar
cbrown
Trainer
Trainer
Posts: 1839
Joined: Thu Oct 14, 2010 8:57 pm
Contact:

metal 5shpn PTP channel width 20/40 above or belwo ?

Wed Sep 19, 2012 3:08 am

use nv2 for wireless protocol.
I agree. You will get a good bit more throughput.
C.Brown

cbrown[at]ravenrocknetworks.com
MTCNA - MTCRE - MTCWE - MTCTCE
MTCSE - TRAINER-0179

Next Training
https://www.cbrown.co/2019/04/08/mtcna-june2019-wv/
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Wed Sep 19, 2012 9:52 pm

ok i turned on nv2 but after that i couldn't connect with pppoe everything ok but pppoe . i turned back to nstrem every thing back to normal is there any setting with nv2 that i sould apply ?
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Mon Sep 24, 2012 12:07 am

pump
 
uldis
MikroTik Support
MikroTik Support
Posts: 3425
Joined: Mon May 31, 2004 2:55 pm

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Mon Sep 24, 2012 4:42 pm

ok i turned on nv2 but after that i couldn't connect with pppoe everything ok but pppoe . i turned back to nstrem every thing back to normal is there any setting with nv2 that i sould apply ?
Please send to support@mikrotik.com the support output files from AP and Client which are using Nv2 and where the PPPoE doesn't work.
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Tue Sep 25, 2012 1:19 am

my ap and my station just ptp link with no pppoe server or pppoe client . iam trying to log in with pppoe via windows and it dosnt work with nv2 as a protocal but it work fine when i use nstrem

and her image to explain the case

Image
 
InoX
Forum Guru
Forum Guru
Posts: 1962
Joined: Tue Jan 09, 2007 6:44 pm

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Thu Sep 27, 2012 9:05 pm

Try Bridge Mode: Enabled to AP and Station Bridge to Client.
 
yaserloz
newbie
Topic Author
Posts: 25
Joined: Fri Apr 15, 2011 2:22 am

Re: metal 5shpn PTP channel width 20/40 above or belwo ?

Thu Sep 27, 2012 11:52 pm

Try Bridge Mode: Enabled to AP and Station Bridge to Client.
thanks i applied station bridge to client instead of station wds and changed to nv2 and it worked just fine . my throughput increased from 90 to 101 mbps

thanks guys for all the help u gave me it was very helpful

Who is online

Users browsing this forum: No registered users and 27 guests