Community discussions

MUM Europe 2020
 
guywifi
just joined
Topic Author
Posts: 10
Joined: Wed Nov 21, 2012 5:40 pm

Using our 1sts Production RB1100AHX2! Couple of Questions

Wed Nov 21, 2012 5:45 pm

Hello all, long time reader first time poster in the forums. We went live with our first production core router last night. Our old firewall was reaching it's limits. So far this router isn't even breaking a sweat!

A couple of questions, well one really. In our old router we could see how many IP's were left in any given VLAN's DHCP pool. Is that possible to do with the RB1100ahx2 or routerOS?

P.S. Yes we wanted to wait for the CCR, but just couldn't hold off any longer, our old router was really doggin during peak times. :(
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24323
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Thu Nov 22, 2012 12:17 pm

in the IP POOL menu you can see how many addresses are used (not how many are left). If you know total number, you can just subsctract :)
No answer to your question? How to write posts
 
guywifi
just joined
Topic Author
Posts: 10
Joined: Wed Nov 21, 2012 5:40 pm

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Thu Nov 22, 2012 8:03 pm

Is utilization of a specific pool, total IP's, total used, total remaining a feature that could be looked at added to the routerOS? Seems like something that wouldn't be too hard to implement since it already knows how many are currently being used........ Thoughts?
 
guywifi
just joined
Topic Author
Posts: 10
Joined: Wed Nov 21, 2012 5:40 pm

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Wed Nov 28, 2012 6:09 pm

in the IP POOL menu you can see how many addresses are used (not how many are left). If you know total number, you can just subsctract :)
Ok, so I see where you can see ALL DHCP addresses used, but how do you see how many are used just for a specific pool. Right now we have 25 pools, and they all show up. Is there a way to have it show how many IP's are being used just by Pool20?
 
User avatar
jhheider
newbie
Posts: 48
Joined: Fri Sep 30, 2011 5:04 pm

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Wed Nov 28, 2012 6:20 pm

/ip pool used print count-only where pool=Pool20
 
guywifi
just joined
Topic Author
Posts: 10
Joined: Wed Nov 21, 2012 5:40 pm

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Wed Nov 28, 2012 11:48 pm

/ip pool used print count-only where pool=Pool20
That worked, thank you for the help. Curious why no mention of this in the manual, unless I missed it.

Thanks again
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24323
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Thu Nov 29, 2012 3:24 pm

/ip pool used print count-only where pool=Pool20
That worked, thank you for the help. Curious why no mention of this in the manual, unless I missed it.

Thanks again
mentioned here http://wiki.mikrotik.com/wiki/Manual:Console
No answer to your question? How to write posts
 
guywifi
just joined
Topic Author
Posts: 10
Joined: Wed Nov 21, 2012 5:40 pm

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Sun Dec 02, 2012 12:25 am

Aw thanks. I did miss it.
 
guywifi
just joined
Topic Author
Posts: 10
Joined: Wed Nov 21, 2012 5:40 pm

Re: Using our 1sts Production RB1100AHX2! Couple of Questio

Sun Dec 02, 2012 12:25 am

Aw thanks. I did miss it.

Who is online

Users browsing this forum: No registered users and 19 guests