Community discussions

MUM Europe 2020
 
krakenant
Member Candidate
Member Candidate
Topic Author
Posts: 136
Joined: Sat Feb 06, 2010 6:32 am

Omnitik 2.4Ghz

Thu Jan 10, 2013 6:53 pm

Any chance you could make one of those. The groove and the Metal options have not worked well for us, and we need an outdoor AP for 2.4Ghz for clients.
 
ManyX
Member Candidate
Member Candidate
Posts: 111
Joined: Sat Jan 07, 2006 12:48 pm
Location: PolanD

Re: Omnitik 2.4Ghz

Mon Jan 14, 2013 10:38 pm

Omnitik 2,4GHz is needed

reg.
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 222
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: Omnitik 2.4Ghz

Wed Jan 16, 2013 3:29 pm

I would need Omnitik 2.4GHz too!
 
okoun
Frequent Visitor
Frequent Visitor
Posts: 98
Joined: Fri Feb 18, 2011 3:11 pm

Re: Omnitik 2.4Ghz

Thu Jun 13, 2013 12:02 am

How's Omnitik at 2.4 GHz? Will it produce? I'd like to see.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24317
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Omnitik 2.4Ghz

Thu Jun 13, 2013 9:48 am

See "RB911 outdoor" in this presentation: http://www.mikrotik.com/download/share/hr13.pdf
No answer to your question? How to write posts
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3089
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: Omnitik 2.4Ghz

Mon Jul 08, 2013 11:40 am

See "RB911 outdoor" in this presentation: http://www.mikrotik.com/download/share/hr13.pdf
I must be blind but there is not such unit in this presentation.....
And yes, when can we see a 2,4Ghz Omnitik? We have 2,4Ghz SXT's so now we need an AP to work with.
The 60 degrees SXT is not an option because you need 4 to cover a 360 degree sector which makes it unworkable (we only have 33Mhz bandwidth channel). Without any time synch and the plastic box this is asking for problems...
4 units to cover a 360 degrees zone makes it also way too expensive!

An 2,4Ghz Omnitik would make a perfect solution! And there is a good argument to bring it on;

Many vendors in the mid and top level WISP industry are leaving 2,4Ghz behind. But due to this the 2,4Ghz band is regaining its use again in open countryside regions. When there are relative few 2,4Ghz domestic devices around 2,4Ghz networks with full band usage and NV2 build on top of the roofs (so SXT's CPE's) is performing surprisingly good to serve scattered houses. In urban areas this wont work since here the noise levels from interfering domestic devices is becoming to much....

So please, bring us a 2,4Ghz OmniTik! I'll bet there is plenty demand for it.....
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.
 
WirelessRudy
Forum Guru
Forum Guru
Posts: 3089
Joined: Tue Aug 08, 2006 5:54 pm
Location: Spain

Re: Omnitik 2.4Ghz

Mon Jul 08, 2013 11:47 am

Oh, and about the mentioned .pdf with the promised new devices;
Several of these are months after their forecasted release still not available to my dealer. I asked them and they tell me they are not available.

I'm referring to:
- SXT SA
- SXT HG
- rb912G OUtdoor
- R11E-HPND miniPCIe


So, any news?
Show your appreciation of this post by giving me Karma! Thanks.

Rudy R. Puister

WISP operator based on MT routerboard & ROS.

Who is online

Users browsing this forum: No registered users and 32 guests