Community discussions

MUM Europe 2020
 
freegeek
just joined
Topic Author
Posts: 8
Joined: Fri Jan 25, 2013 12:02 pm

CCR1016-12G bgp edge router

Fri Jan 25, 2013 12:33 pm

I'm looking to use a couple of CCR1016-12G as an internet edge router. I'm following this thread and it seems that are still quite some bugs to be worked out. I don't need fancy features, just the usual stuff (full bgp peering, routing, some ACL rules for security, snmp for monitoring, maybe NAT). Is in your opinion this router already production grade for this kind of setup?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24424
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR1016-12G bgp edge router

Fri Jan 25, 2013 12:39 pm

Currently routing tables are not optimized for multicore, so it will simply not be "super fast". Once we add support (should be soon), you will get some 20-30x speed improvement. Apart from that, routing works fine
No answer to your question? How to write posts
 
freegeek
just joined
Topic Author
Posts: 8
Joined: Fri Jan 25, 2013 12:02 pm

Re: CCR1016-12G bgp edge router

Fri Jan 25, 2013 1:07 pm

Realistically, what kind of performance can I expect today?
Stability is more important for me today then raw numbers, I don't expect it to push several Gbit today, a few 100 Mbit would be fine, as long as it's stable
Is this realistic?

Thx for any feedback
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5970
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: CCR1016-12G bgp edge router

Fri Jan 25, 2013 1:27 pm

Note that dynamic routing protocols like BGP updates routing table and does not influence much what forwarding speed will be. Only routing table updates will be at similar speed as on RB1100.
 
blitz
newbie
Posts: 29
Joined: Wed Jan 30, 2013 10:16 am

Re: CCR1016-12G bgp edge router

Mon Sep 16, 2013 1:25 pm

Hi
I have problems with full bgp routing in CCR1016 . Once in 1 or 2 days bgp crashes and one cpu stays stuck at 100%. It did't shows me anything in routing menu. I've send 2 support.rif but no answers yet.
Thanks,
Andrew
 
AlArenal
Member Candidate
Member Candidate
Posts: 131
Joined: Thu Aug 01, 2013 5:24 pm
Location: Iserlohn, Germany

Re: CCR1016-12G bgp edge router

Mon Sep 16, 2013 1:41 pm

And it should be noted, that it's still recommended to turn SNMP off when using BGP. This will hopefully change soon, too.
 
blitz
newbie
Posts: 29
Joined: Wed Jan 30, 2013 10:16 am

Re: CCR1016-12G bgp edge router

Mon Sep 16, 2013 1:58 pm

ok. I have disabled snmp but i don't know if the problem is from there. The router work perfect (with one core going down and up to 100% because routing does not work multicore) but after 1 day or 2 it is stucked to 100 % and in routing menus i cannot see anything anymore. I had to reboot the router and anything returns to normal.
 
blitz
newbie
Posts: 29
Joined: Wed Jan 30, 2013 10:16 am

Re: CCR1016-12G bgp edge router

Mon Sep 16, 2013 4:06 pm

no use

Who is online

Users browsing this forum: Bing [Bot], Google [Bot], Labriks, MSN [Bot] and 9 guests