Hi!
The same with 35LC20D and 53LC20D pair.
I tested with an RJ45 SFP and port works. So I think is about firm/soft issue
On RB3011 I can se module present, led on and how version an tx/rx power
On Rb2011 unable to see nothing
Routerboard info
/system routerboard> print
;;; Firmware upgraded successfully, please reboot for changes to take effect!
routerboard: yes
model: 2011UAS
serial-number: 374802D1AEF8
firmware-type: ar9344
factory-firmware: 3.0rc5
current-firmware: 6.45.3
upgrade-firmware: 6.48
SFP monitor
/interface ethernet> monitor sfp1
name: sfp1
status: no-link
auto-negotiation: done
advertising:
link-partner-advertising:
sfp-rx-loss: yes
sfp-type: (unknown)
eeprom-checksum: good
eeprom: 0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
00a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
00b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
00c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
00d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
00e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
00f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ........ ........
Resources info
/interface ethernet> /system resource print
uptime: 1w5h1m1s
version: 6.48 (stable)
build-time: Dec/22/2020 11:20:49
free-memory: 92.5MiB
total-memory: 128.0MiB
cpu: MIPS 74Kc V4.12
cpu-count: 1
cpu-frequency: 600MHz
cpu-load: 10%
free-hdd-space: 104.3MiB
total-hdd-space: 128.0MiB
write-sect-since-reboot: 678175
write-sect-total: 70360738
bad-blocks: 0%
architecture-name: mipsbe
board-name: RB2011UAS
platform: MikroTik
If needed more info or screnshots, I can do!
Thanks