Help solve the problem of the Board 433 router and show me this message


RouterBOOT booter 2.20

RouterBoard 433AH

Authorization: Passed
CPU frequency: 680 MHz
Memory size: 128 MB

Boot configuration reset, applying defaults

Press any key within 2 seconds to enter setup..
trying bootp protocol........................................................................................................................................................................................................... failed
kernel loading failed
loading kernel from nand... OK
setting up elf image... OK
jumping to kernel code
Oops[#1]:
Cpu 0
$ 0 : 00000000 00000001 c7d70194 00000000
$ 4 : c037933c 00000e95 ffffffff c03c1bac
$ 8 : c03c5c7f c03c5c7f 00000008 2d646972
$12 : 6e672074 192679f8 9d3b0f27 6f206164
$16 : c7d70174 c7d5e54c c7d70194 00000001
$20 : c7c21c40 00000004 ffffffff c0345fcc
$24 : 00000018 c025fb30
$28 : c7c20000 c7c21c10 c0380000 c01e1d60
Hi : 0000006a
Lo : 0000000c
epc : c01e1de8 yaffs_AddObjectToDirectory+0x114/0x188
Not tainted
ra : c01e1d60 yaffs_AddObjectToDirectory+0x8c/0x188
Status: 1000c603 KERNEL EXL IE
Cause : 0080000c
BadVA : 00000004
PrId : 00019374 (MIPS 24Kc)
Process init (pid: 1, threadinfo=c7c20000, task=c7c1c000, tls=00000000)
Stack : c7c0d000 c7d70174 00000003 00000001 c7c0d000 00000000 00000000 c01e4a60
c03454ed 00000000 c7d23800 00000001 ffffffff 0000001c 00000887 00000c6a
00001ca4 218300f2 00000002 0000159e 00000000 00001a00 00000000 c7c0d000
c7d70160 c7d70174 c7c0d000 c7c0d000 0000000a 0000001c c7d142fc 00000000
00000000 00000000 7fa05f60 c01e7e9c c7c21d60 c0217084 c0338d2d c020be0c
...
Call Trace:
[<c01e1de8>] yaffs_AddObjectToDirectory+0x114/0x188
[<c01e4a60>] yaffs_CheckpointRestore+0x1f4/0x42c
[<c01e7e9c>] yaffs_GutsInitialise+0x4f4/0x1e94
[<c01e1198>] yaffs_internal_read_super+0x6e8/0x828
[<c01e1318>] yaffs_internal_read_super_mtd+0x14/0x2c
[<c018dab4>] get_sb_bdev+0x138/0x1b0
[<c01de804>] yaffs_read_super+0x20/0x2c
[<c018cb14>] vfs_kern_mount+0x68/0x11c
[<c018cc20>] do_kern_mount+0x48/0x100
[<c01a52f4>] do_mount+0x620/0x694
[<c01a56a4>] sys_mount+0x8c/0xf0
[<c010d624>] stack_done+0x20/0x3c


Code: ae00001c 8e230068 26020020 <ac620004> ae030020 26230068 ae030024 ae220068 8e020008
---[ end trace bc01e7c431976d56 ]---
Kernel panic - not syncing: Attempted to kill init!

I don't know about your specific error.

However have you tried a netinstall? that should reinstall a fresh working copy of router os and then if it continues it may point more towards hardware issues.

Regards
Alexander

Yes you using netinstall Program and also you using another program to enter Aalih the
puty