Community discussions

 
eringuet
just joined
Topic Author
Posts: 2
Joined: Thu Jul 11, 2013 3:53 pm

RB751U-2HnD stopped working

Thu Jul 11, 2013 4:04 pm

Hi,

Last night I came home and my router wasn't working anymore. The lights are flashing and the hardware seem to work.

I tried resetting by holding the RES switch while connecting the power, it didn't work.

I tried netinstall by holding the RES switch then connecting the power and releasing when the ACT light stops flashing. I was able to ping the BOOTP provided IP once but the router never shown in netinstall. I tried on windows 7 and on a fresh XP install.

Is there anything else to try?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24268
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB751U-2HnD stopped working

Mon Jul 15, 2013 11:12 am

If all LEDs are flashing, you must contact the seller to replace it, it has a hardware problem.
No answer to your question? How to write posts
 
eringuet
just joined
Topic Author
Posts: 2
Joined: Thu Jul 11, 2013 3:53 pm

Re: RB751U-2HnD stopped working

Mon Jul 15, 2013 2:53 pm

I sent it in.

Thanks
 
FadeeA
just joined
Posts: 1
Joined: Mon Jul 08, 2013 11:58 am

Re: RB751U-2HnD stopped working

Mon Aug 05, 2013 11:07 pm

downgraded rb571u-2hnd from 6.1 to 6.0 then to 5.25. now my routerboard is not accessible. I tried to reset to factory. the result is that now the port where I plugged my laptop into MT flashes then suddenly all the leds except the wifi led flashes once then turn off again. then the same cycle repeat on and on. how can I recover or reset my MT.
 
User avatar
dunga
Member Candidate
Member Candidate
Posts: 254
Joined: Fri Jan 23, 2009 9:51 am
Location: Nigeria

Re: RB751U-2HnD stopped working

Wed Sep 11, 2013 12:14 pm

Had similar problem, but mine is that the lights does not come on wen it powers up, but with netinstall, it shows error as the led light will light and reboot, then the whole lights will flash again and the connected port will come on, repeatedly.

This is the diagram of what i see when i tried using netinstall.
error netinstalling rb751U.jpg
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: MSN [Bot] and 36 guests