Page 1 of 1

RB-912 outdoor

Posted: Thu Jul 11, 2013 4:08 pm
by 49er
Hi, when is the RB912 Outdoor available?

Re: RB-912 outdoor

Posted: Fri Jul 19, 2013 9:56 pm
by blue
No one is talking about this product. Maybe it will finish just like another good mtk products - only on paper :(
But if they start to sell it, I will change a lot of old ubnt rockets. Faster cpu, gigabit,... it looks good in theory...

Re: RB-912 outdoor

Posted: Sat Jul 20, 2013 2:45 pm
by laithmikrotik
i have 2 sets.......it is very very good...........
i buy it 80$ each one

Re: RB-912 outdoor

Posted: Sat Jul 20, 2013 3:09 pm
by blue
Please send us the link if there is a web shop. I didn't have luck finding it...

Sent from my HTC One using Tapatalk 2

Re: RB-912 outdoor

Posted: Sun Jul 21, 2013 5:46 pm
by WirelessRudy
i have 2 sets.......it is very very good...........
i buy it 80$ each one
Where or how did you get them? Are they prototypes? Or end products?
Many of us would like to see these hit the market now....

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 11:13 am
by normis
He can't have this product, since we have not sent out any, and we haven't shown any prototypes to anybody.

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 11:20 am
by WirelessRudy
He can't have this product, since we have not sent out any, and we haven't shown any prototypes to anybody.
So, any foresights?
I need to build some 2,4Ghz AP's and am actually waiting for that new stuff to come out.....

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 11:37 am
by normis
He can't have this product, since we have not sent out any, and we haven't shown any prototypes to anybody.
So, any foresights?
I need to build some 2,4Ghz AP's and am actually waiting for that new stuff to come out.....
Distributors should have info about it for a while now. Try to pressure them :)

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 3:09 pm
by laithmikrotik
actually it is perfect set....look to my pictures

the rb912 put in stationbox and connected with ubnt sector antenna 120'/ 19dbi


Image



Image

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 3:12 pm
by normis
laithmikrotik this is not the product they are talking about. You have a Stationbox, it's different.

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 3:17 pm
by laithmikrotik
laithmikrotik this is not the product they are talking about. You have a Stationbox, it's different.
dont make me crazy......i have two rb 912...this is one of my rb912...im from iraq....

just see this again

Image

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 3:18 pm
by normis
Yes, Stationbox with RB912 inside. But Stationbox is not made by MikroTik. Above posters talking about this product: http://www.mikrotik.com/download/share/RB912_OUT_5.pdf

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 3:26 pm
by laithmikrotik
Yes, Stationbox with RB912 inside. But Stationbox is not made by MikroTik. Above posters talking about this product: http://www.mikrotik.com/download/share/RB912_OUT_5.pdf
oh my god. sorry ..but the stationbox is very cheap here in iraq ..it is about 18$+ connectors( free )
+rb 912 ( 80$ )...... :D :D :D

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 3:46 pm
by laithmikrotik
this is another one of RB912UAG..... :D :D :D


Image

Re: RB-912 outdoor

Posted: Mon Jul 22, 2013 6:00 pm
by WirelessRudy
He can't have this product, since we have not sent out any, and we haven't shown any prototypes to anybody.
So, any foresights?
I need to build some 2,4Ghz AP's and am actually waiting for that new stuff to come out.....
Distributors should have info about it for a while now. Try to pressure them :)
Answer of my provider:
No exact date is known. It should be available in the middle of August.


best regards,

Bartek Rodek
Inter Projekt S.A.
http://www.interprojekt.pl
So. what's happening????

Re: RB-912 outdoor

Posted: Tue Jul 23, 2013 12:01 am
by honzam
So. what's happening????
This is normal. Mikrotik Support says: Ask the distributors they know.
You ask distributors and they know nothing. So where is the problem?

Same as there: http://forum.mikrotik.com/viewtopic.php ... 63#p369040

Re: RB-912 outdoor

Posted: Wed Jul 24, 2013 10:54 pm
by yogi
Normis is right, as how can they be responsible for shipping and distributors ordering. Here is a local supplier who received stock today a lot farther from Latvia than you are http://www.scoopdistribution.co.za/prod ... ts_id=1462

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 1:49 am
by WirelessRudy
Normis is right, as how can they be responsible for shipping and distributors ordering. Here is a local supplier who received stock today a lot farther from Latvia than you are http://www.scoopdistribution.co.za/prod ... ts_id=1462
Well, nice for you. I asked my provider in Poland and according to them they recieved no information whatsoever about new products yet. But maybe I have to ask them again to ask MT....

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 9:39 am
by yogi
Not necessary, just tell them to read the distributor newsletter they received on the 10th July. I have issues with some of the Mikrotik designs and can get frustrated with some finishing touches on their products, but for communication they are the best out there. Their whole logistics is incredibly efficient in comparison to other suppliers.

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 11:20 am
by WirelessRudy
but for communication they are the best out there. Their whole logistics is incredibly efficient in comparison to other suppliers.
Really? I'll bet some on this forum do not agree with you. And I must say communications could definately be better at times. Would'nt be the first time I just never, or after many days only, get an answer on questions I send through the support channel.
I don't know about other vendors but in nowadays world this can be done better......

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 11:24 am
by normis
Rudy, you mostly ask complicated questions that involve intensive testing and reproduction of difficult configurations. Of course this takes longer.

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 12:24 pm
by WirelessRudy
Rudy, you mostly ask complicated questions that involve intensive testing and reproduction of difficult configurations. Of course this takes longer.
8) The simple things I can handle myself.....

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 12:26 pm
by WirelessRudy
@normis; Can you tell me if the rb-912 outdoors (and others forecasted for spring this year) are available to distributors in Europe? If so I will push my provider in Poland to deliver them..... I really need a duo chain 2,4Ghz AP in a box.

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 12:28 pm
by normis
Devices are in transit, possibly the distributors don't want to list them until they have them in stock.

Re: RB-912 outdoor

Posted: Thu Jul 25, 2013 12:49 pm
by jaykay2342
Why is the RB192 outdoor not listed on routerboard.com yet?

Re: RB-912 outdoor

Posted: Fri Aug 02, 2013 3:20 pm
by WirelessRudy
Is the rb912G outdoor a multi channel unit (2,4 + 5Ghz) or do they come in either 2,4Ghz or 5Ghz?
My supplier has the 5Ghz now listed, but according to them a 2,4Ghz version is not even announced!

According the .pdf mentioned in this tread it (they) should be available already since April this year......


Normis, can you shine a light on this? Can we see a 2,4Ghz omni AP coming soon to the market or not?

And to be honest, why can't the Omnitik not come in a 2,4Ghz version? Would make a perfect solution for rural areas where not a lot of 2,4Ghz usage is around. I would order 2 or 3 straight away.... (I know, I know, not enough to build a production line for me only... :) but I'll bet there is plenty of use for it around the world. It would combine fine with the 2,4Ghz SXT's like the 5Ghz platform works very good too....)

Re: RB-912 outdoor

Posted: Fri Aug 02, 2013 3:21 pm
by normis

Re: RB-912 outdoor

Posted: Fri Aug 02, 2013 5:01 pm
by WirelessRudy
What kind of answer is this? This is 5Ghz unit. I am asking about 2,4Ghz unit.... :(

Re: RB-912 outdoor

Posted: Fri Aug 02, 2013 5:36 pm
by blue
Finally on Routerboard.com. Now only to arrive in Serbia...

Re: RB-912 outdoor

Posted: Fri Aug 02, 2013 6:58 pm
by blue
But, one question. On routerdoard.com homepage it has 2xRPTNC, but when You open the link it says two RPSMA. Regarding the picture, it should be PRSMA, but what is true?

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 9:24 am
by normis
But, one question. On routerdoard.com homepage it has 2xRPTNC, but when You open the link it says two RPSMA. Regarding the picture, it should be PRSMA, but what is true?
RP-SMA ir correct!

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 9:29 am
by blue
RP-SMA ir correct!
Thanks. I saw that You already change it on routerboard.com

BR...

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 11:52 am
by WirelessRudy
2,4Ghz unit? Available when?

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 12:03 pm
by normis
2,4Ghz unit? Available when?
You can already put a 2GHz wireless card inside, as there is one free miniPCIe slot.

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 12:11 pm
by WirelessRudy
Yeah, I can also buy something else...
I mean, the brochere clearly states 'both 2,4 and 5 versions available' So what happened? 2,4Ghz is put on a side track?

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 12:14 pm
by normis
Yeah, I can also buy something else...
I mean, the brochere clearly states 'both 2,4 and 5 versions available' So what happened? 2,4Ghz is put on a side track?
No, it's simply not available yet

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 1:49 pm
by Ivoshiee
2,4Ghz unit? Available when?
You can already put a 2GHz wireless card inside, as there is one free miniPCIe slot.
Where are those Routerboard mini PCI-E modules? These should have been released in may but routerboard.com does not even mention those?

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 10:20 pm
by Babek
HI, i have a question did anyone has a solution to fit RB912UAG-5HPnD-OUT on ubiquiti antennas ?
Mikrotik do you plan to have such a mounting bracketr ? I though it would ideally fit into ubnt antennas but it doesn't ,and chains are reversed.
Pawel

Re: RB-912 outdoor

Posted: Mon Aug 05, 2013 10:45 pm
by honzam
2,4Ghz unit? Available when?
You can already put a 2GHz wireless card inside, as there is one free miniPCIe slot.
Where are those Routerboard mini PCI-E modules? These should have been released in may but routerboard.com does not even mention those?
Not available yet. You can buy another miniPCI-e modules. For example Gigabyte b/g GN-WI01GT
or something with atheros chipset....

Re: RB-912 outdoor

Posted: Tue Aug 06, 2013 9:25 am
by normis
HI, i have a question did anyone has a solution to fit RB912UAG-5HPnD-OUT on ubiquiti antennas ?
Mikrotik do you plan to have such a mounting bracketr ? I though it would ideally fit into ubnt antennas but it doesn't ,and chains are reversed.
Pawel
You can mount it on the same mast, just below the antenna. You will just need little longer cables to connect it.

Re: RB-912 outdoor

Posted: Tue Aug 06, 2013 11:10 am
by WirelessRudy
HI, i have a question did anyone has a solution to fit RB912UAG-5HPnD-OUT on ubiquiti antennas ?
Mikrotik do you plan to have such a mounting bracketr ? I though it would ideally fit into ubnt antennas but it doesn't ,and chains are reversed.
Pawel
What do you mean with "chains are reversed"? How can they be 'reversed'?

Re: RB-912 outdoor

Posted: Tue Aug 06, 2013 11:33 am
by DiabolixZA
Just a question about the RB912UAG-5HPnD-OUT. Is it fine to leave the top part off?

I really don't want to bend the LMR's to make the cover part fit..

Re: RB-912 outdoor

Posted: Tue Aug 06, 2013 11:42 am
by normis
Just a question about the RB912UAG-5HPnD-OUT. Is it fine to leave the top part off?

I really don't want to bend the LMR's to make the cover part fit..
we have extensively tested this, there is no stress on the cable, you can safely use the cover. if you leave the top off, connectors are exposed to the rain, it depends on how you cover them.

Re: RB-912 outdoor

Posted: Tue Aug 06, 2013 8:28 pm
by Babek
What do you mean with "chains are reversed"? How can they be 'reversed'?
In SXT chain 0 is Horizontal but you can't connect to ubnt antenna with leds on visible side because
ubnt has Horizontal on the ritght side and mikrotik on the left.

It would be nice if ubnt connectors and mounting place would fit to this microtik - i 've made a lot of plans to replace existing instalations but
now i have to consider buing this product or just usual 912 with external outdoor alubox
Pawel

Re: RB-912 outdoor

Posted: Wed Aug 07, 2013 8:44 am
by normis
Babek, just change to a bit longer cables, and it will fit

Re: RB-912 outdoor

Posted: Wed Aug 07, 2013 9:20 am
by Babek
OK but this box in this situation doesn't have sense - UBNT makes cables to their antennas. if I have to play with R-PSMA i prefer make bigger alubox with N-connector and put a standard 912UAG in it. I use only RF 300 cable and it's too thick to make such a short patchcords. Another thing that r-psma are usually badly made - i was playing with them a long time ago with ovislink 5460 equimpent making patchords to antennas and I hate this small connectors.
Maybe it would be nice to consider to make good short cables to this units ? I'd like to connect it simple and firlmly. An aluminium/metall holder that fits to ubnt antennas instead of separate DIN rail mount -would be interesting or both if it is replaceble.

Think about how to fit it in UBNT antennas - because it would be the best microtik the world needs :)

Re: RB-912 outdoor

Posted: Mon Nov 25, 2013 7:11 pm
by el berto
Does somebode has got RB912 outdoor case?

Image

I would like to know if enclosure length (without upper cap for antennas) is higher or equal to RB411 aluminium case.
Thanks.

Re: RB-912 outdoor

Posted: Mon Nov 25, 2013 8:54 pm
by honzam
Yes, it is bigger. I can measure tomorrow ...

Re: RB-912 outdoor

Posted: Fri Feb 07, 2014 7:18 pm
by el berto
Finally I've just received my RB-912 outdoor.......
Ok, not bad for outdoor, but I'm very disappointed using it indoor: there would be a smaller case in the future for indoor use?

Re: RB-912 outdoor

Posted: Sat Feb 08, 2014 2:44 am
by WirelessRudy
Finally I've just received my RB-912 outdoor.......
Ok, not bad for outdoor, but I'm very disappointed using it indoor: there would be a smaller case in the future for indoor use?
So, if I understand well, you buy a unit in an outdoor casing, made for use outdoor, and than complain about its use indoor?? From what planet are you?
If you want similar powerfull router for indoor, buy an indoor unit. tjeehh, some people..... :shock:

Re: RB-912 outdoor

Posted: Wed Feb 12, 2014 10:28 am
by el berto
So, if I understand well, you buy a unit in an outdoor casing, made for use outdoor, and than complain about its use indoor?? From what planet are you?
If you want similar powerfull router for indoor, buy an indoor unit. tjeehh, some people..... :shock:
On documentation aren't there available drawings, so the only way was to buy enclosure; on forum I've only heard outdoor enclosure it's "similar" to metalllic one (I suppose CA series), but what does "similar" exactly mean???

Then it's the only one enclosure I've seen (from MT) using DIN rail support and specific for RB912.
Have you ever seen DIN rail used outdoor? Me not.

I hope MT will provide in the future for DIN rail indoor enclosures.

Re: RB-912 outdoor

Posted: Wed Feb 12, 2014 11:45 am
by normis
So, if I understand well, you buy a unit in an outdoor casing, made for use outdoor, and than complain about its use indoor?? From what planet are you?
If you want similar powerfull router for indoor, buy an indoor unit. tjeehh, some people..... :shock:
On documentation aren't there available drawings, so the only way was to buy enclosure; on forum I've only heard outdoor enclosure it's "similar" to metalllic one (I suppose CA series), but what does "similar" exactly mean???

Then it's the only one enclosure I've seen (from MT) using DIN rail support and specific for RB912.
Have you ever seen DIN rail used outdoor? Me not.

I hope MT will provide in the future for DIN rail indoor enclosures.
Please clarify what makes you disappointed about it? Just the size?

Re: RB-912 outdoor

Posted: Wed Feb 12, 2014 3:33 pm
by el berto
As oudoor, enclosure it's nice but there aren't suitable cases for indoor.
In this specific case (RB912) I have all-in-one routerboard plug-n-play (I use it with 3G card), so what's else?
I just think outdoor enclosure it's bigger than other routers brands to use indoor, enclosures with DIN mount are usually used as indoor.
But outdoor enclosure it's the only one available....

Re: RB-912 outdoor

Posted: Thu Feb 13, 2014 8:18 am
by normis
As oudoor, enclosure it's nice but there aren't suitable cases for indoor.
In this specific case (RB912) I have all-in-one routerboard plug-n-play (I use it with 3G card), so what's else?
I just think outdoor enclosure it's bigger than other routers brands to use indoor, enclosures with DIN mount are usually used as indoor.
But outdoor enclosure it's the only one available....
Have you considered other products that we have? For indoor, the RB951 is quite small.
DIN rail mount is quite universal, we provide it as an option, not the main mounting system

Re: RB-912 outdoor

Posted: Thu Feb 13, 2014 10:32 am
by el berto
For indoor, the RB951 is quite small.
...but with no 3G card.


I already use RB951 with USB modem, but it's for other applications then RB912+3G card.

Re: RB-912 outdoor

Posted: Thu Feb 13, 2014 10:32 am
by normis
For indoor, the RB951 is quite small.
...but with no 3G card.


I already use RB951 with USB modem, but it's for other applications then RB912+3G card.
It has USB port for 3G