Page 1 of 1

RB912UAG-5HPnD-OUT - how to open the case

Posted: Sun Oct 13, 2013 6:42 pm
by frboc
Hello,
just purchased the RB912UAG-5HPnD-OUT, now I would like to add a mini pci-e card inside... but actually I realize it is not clear how to open the case ? Please help.

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Sun Oct 13, 2013 7:10 pm
by honzam

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Sun Oct 13, 2013 7:30 pm
by Kreacher
Hello,

you can mail to support@mikrotik.com and they would explane it to you at doing their best!

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Sun Oct 13, 2013 7:52 pm
by frboc
Looking carefuly at the movie, we can see the guy has the device dissassemled already in the box. He did some prework (also the RSMAs are unscrewed in the video) :)

Normally, the bottom part of the device cannot be pulled out.

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Sun Oct 13, 2013 8:01 pm
by honzam
Yes, it is canned. But you know how to open it?

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Sun Oct 13, 2013 9:28 pm
by nickshore
There are 2 screws which have small covers on the outside of the case.

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Mon Nov 04, 2013 8:33 pm
by frboc
There are 2 screws which have small covers on the outside of the case.
Thanks. Difficult to remove them but possible.

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Fri Nov 15, 2013 4:28 pm
by lustyffh
Please note that RB912G-5HPND has no space to connect 3rd pigtail for an extension card. AUX2 almost sticks to the motherboard leaving no room for external pigtail.

Re: RB912UAG-5HPnD-OUT - how to open the case

Posted: Mon Nov 18, 2013 10:36 pm
by IngensNetworks
Please note that RB912G-5HPND has no space to connect 3rd pigtail for an extension card. AUX2 almost sticks to the motherboard leaving no room for external pigtail.
Well, we have installed a Sierra 8705 with it's own pigtail, and the solution is to use one of the three marked holes, who can be convert to available, with a simply scissors rotating it till get desired diameter...

Look the pic for final results.

Kind Regards.

Max