One from a lot of RB450G runing with 100% of cpu utilisation.
Is it hardware of software problem? How to disable health problem or
/system health print - shows nothing
Code: Select all
/tool profile duration=5
NAME CPU USAGE
console all 0.5%
flash all 0%
firewall all 0%
winbox all 0%
management all 27.5%
telnet all 0%
profiling all 0%
health all 71%
unclassified all 1%
Code: Select all
/system resource print
uptime: 9m10s
version: 5.26
free-memory: 245912KiB
total-memory: 257108KiB
cpu: MIPS 24Kc V7.4
cpu-count: 1
cpu-frequency: 680MHz
cpu-load: 100%
free-hdd-space: 481536KiB
total-hdd-space: 520192KiB
write-sect-since-reboot: 199
write-sect-total: 262061
bad-blocks: 0%
architecture-name: mipsbe
board-name: RB450G
platform: MikroTik
Code: Select all
/system routerboard print
routerboard: yes
model: 450G
serial-number: 33B60288BFA7
current-firmware: 3.07
upgrade-firmware: 3.07
/system package print
Flags: X - disabled
# NAME VERSION SCHEDULED
0 system 5.26
1 ups 5.26
2 routeros-mipsbe 5.26
3 X wireless 5.26
4 routerboard 5.26
5 X ipv6 5.26
6 hotspot 5.26
7 advanced-tools 5.26
8 mpls 5.26
9 security 5.26
10 ppp 5.26
11 routing 5.26
12 dhcp 5.26