My concern was that the Mikrotik SFP may not be to spec or a proprietary method. But as far as I know everything is in the same specs as I was under the impression 1310nm Single Mode is the same as 1000Base-LX. Because I could not find the Mikrotik SFP labeled as 1000Base-LX, I worried that it may not communicate with the providers transceiver.
Providers transceiver: Cisco WS-G5486 Long wavelength/long haul (1000BASE-LX/LH) 1310nm Single Mode
My transceiver: Mikrotik S-31DLC20D 1.25G 1310nm 20km Single Mode
24 strand 800 meter singlemode fiber run
Corning rackmount LC patch panel with port 1 spliced to fiber run into providers side, and port 2 as a backup
I have a couple of different cables available to me.
1 Meter and 15 Meter. Singlemode, PVC LC-LC, Premium patch cables
1 Meter Singlemode, LC-LC, value patch cables.
260GS and a RB2011 to try the sfp modules in. I can connect the 260GS and RB2011 through the SFP.
I have tried swapping the TX/RX with multiple cables with no luck.
These are the variables that I am aware of. Is there anything wrong with what I have?