Community discussions

MUM Europe 2020
 
alialiraqi
just joined
Topic Author
Posts: 22
Joined: Thu Jan 09, 2014 1:52 am

normal temp of RB912??

Wed Apr 09, 2014 11:14 pm

I have an rb912uag-hpnd-outdoor, connected to this antenna http://www.wireless-instruments.com/en/ ... -17hv.html

the problem is that its problem is getting very hot on the burst client-use time ( on evenning ) it reahcs about 55C for just 4 clients.

you can see the attached image.
where I have heared that this board can withstand about 60 clients.

is 55c a normal temperature for rb912?
Can I reduce the temperature to save the board from being damaged?

what is its maximum accepted temperature?

regards
rb tempن.png
You do not have the required permissions to view the files attached to this post.
Last edited by alialiraqi on Thu Apr 10, 2014 1:58 am, edited 2 times in total.
 
alialiraqi
just joined
Topic Author
Posts: 22
Joined: Thu Jan 09, 2014 1:52 am

Re: normal temp of RB912??

Thu Apr 10, 2014 1:51 am

the board is not too hot when there is no download over it
You do not have the required permissions to view the files attached to this post.
 
lunchboxrts
Member Candidate
Member Candidate
Posts: 144
Joined: Sat Aug 19, 2006 6:40 am
Location: United States

Re: normal temp of RB912??

Thu Apr 10, 2014 10:18 am

Our 912's haven't broke 39c under heavy load.
 
jnygard
just joined
Posts: 22
Joined: Mon Oct 07, 2013 3:05 pm

Re: normal temp of RB912??

Fri Apr 11, 2014 11:55 pm

What is the ambient temperature that the box is in?
 
plisken
Forum Guru
Forum Guru
Posts: 2435
Joined: Sun May 15, 2011 12:24 am
Location: Belgium
Contact:

Re: normal temp of RB912??

Mon Apr 14, 2014 7:18 pm

How much is the ambient temperature?

Maby a ventilator is the solution of this
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: normal temp of RB912??

Tue Apr 15, 2014 1:21 pm

ambient temperature is important but most important is what data-rates are used by wireless interface. Lower data rates usually come with higher transmit power. To overcome this, get better link quality.

Who is online

Users browsing this forum: No registered users and 21 guests