Community discussions

MUM Europe 2020
 
User avatar
rextended
Forum Guru
Forum Guru
Topic Author
Posts: 2950
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

August new products, "ac" and others...

Thu Aug 14, 2014 5:58 pm

Image
Cloud Router Switch 109-8G-1S-2HnD-IN
is new "small size low cost" member of our CRS series. It comes with eight Gigabit Ethernet ports and high power 1000mW 2.4GHz wireless. Product supports 10-57V and is 802.3af/at compliant!
http://routerboard.com/CRS109-8G-1S-2HnD-IN


Image
mAP
The mAP is a tiny size wireless 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive or Active PoE (802.3af and 802.3at) and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
http://routerboard.com/RBmAP2n


Image
NetBox 5
802.11ac support for up to 540Mbits, waterproof enclosure, 1300mW output
http://routerboard.com/RB911G-5HPacD-NB

Image
SXT ac
802.11ac up to 540Mbit, 1300mW RF output, low latency Point to Point
http://routerboard.com/RBSXTG-5HPacD

Image
SXT SA ac
802.11ac up to 540Mbit, 1300mW RF output, wide beamwidth sector antenna
http://routerboard.com/RBSXTG-5HPacD-SA

Image
And 4 different model of NetMetal 5 2x2 and 3x3!!!
5Ghz integrated 802.11ac Tripple Chain AP/Backbone/CPE, 3xRPSMA connectors, miniPCI-e slot, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB922UAGS-5HPacT-NM

5Ghz integrated 802.11ac Dual Chain AP/Backbone/CPE, 2xRPSMA connectors, miniPCI-e slot, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB922UAGS-5HPacD-NM

5Ghz integrated 802.11ac Tripple Chain AP/Backbone/CPE, 3xRPSMA connectors, 2000mW TX power, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB921UAGS-5SHPacT-NM

5Ghz integrated 802.11ac Dual Chain AP/Backbone/CPE, 2xRPSMA connectors, 2000mW TX power, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB921UAGS-5SHPacD-NM


Image
RB911G-5HPacD
720Mhz CPU, 128MB RAM, 1xGigabit Ethernet, onboard 1000mW 802.11ac Two Chain 5Ghz wireless, RouterOS L3
http://routerboard.com/RB911G-5HPacD


Image
RB922UAGS-5HPacD
720Mhz CPU, 128MB RAM, 1xGigabit Ethernet, 1xSFP cage, 1xminiPCI-e, 1xSIM, onboard 1000mW 802.11ac Two Chain 5Ghz wireless, RouterOS L4
http://routerboard.com/RB922UAGS-5HPacD


Image
R11e-5HacD
5Ghz miniPCI-express, 802.11ac dual chain, 500mW, 2x MMCX
http://routerboard.com/R11e-5HacD
I'm Italian, not English. Sorry for my imperfect grammar.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 207
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: August new products, "ac" and others...

Sat Aug 16, 2014 10:14 am

A warm welcome to the new members of the family! I am (im)patiently waiting for the store availability of the mAP and the NetMetal.

I have a question though: which antennas would you recommend for pairing with the 3 chain NetMetal, for an outdoor wide area PtMP network?

Στάλθηκε από το GT-I9100 μου χρησιμοποιώντας Tapatalk
Passionate about networks
Enthusiastic about Mikrotik
MTCNA | MTCRE | MTCINE

No trees were killed to send this message,
but a large number of electrons were terribly inconvenienced.
 
User avatar
rextended
Forum Guru
Forum Guru
Topic Author
Posts: 2950
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: August new products, "ac" and others...

Sat Aug 16, 2014 8:32 pm

A warm welcome to the new members of the family! I am (im)patiently waiting for the store availability of the mAP and the NetMetal.

I have a question though: which antennas would you recommend for pairing with the 3 chain NetMetal, for an outdoor wide area PtMP network?

Στάλθηκε από το GT-I9100 μου χρησιμοποιώντας Tapatalk
It's all already on routerboard.com store!

I can't suggest one 3x3 antenna because actually I never searched that.
I'm Italian, not English. Sorry for my imperfect grammar.
 
InoX
Forum Guru
Forum Guru
Posts: 1967
Joined: Tue Jan 09, 2007 6:44 pm

Re: August new products, "ac" and others...

Sun Aug 17, 2014 3:59 pm

 
undiU
just joined
Posts: 15
Joined: Fri Aug 15, 2014 10:46 pm
Location: Lithuania

Re: August new products, "ac" and others...

Sun Aug 17, 2014 8:02 pm

Hi All,

Maybe stupid question, but are the new 802.11ac routerboards backward compatible with 802.11n devices on 5Ghz?

Thanks for clarification...
 
Quindor
Member
Member
Posts: 347
Joined: Tue Aug 14, 2012 2:57 am
Location: Noord-Brabant, The Netherlands
Contact:

Re: August new products, "ac" and others...

Sun Aug 17, 2014 10:54 pm

Just a quick note, the new CRS109-8G-1S-2HnD-IN is not AC wireless. Sadly the mAP isn't either.
http://www.campzone.nl World's Largest Outdoor LANParty, http://intermit.tech Intermittend Technology blog, My blog about the ESP8266, IP Camera's and other tech related subjects!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24418
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: August new products, "ac" and others...

Mon Aug 18, 2014 9:38 am

Hi All,

Maybe stupid question, but are the new 802.11ac routerboards backward compatible with 802.11n devices on 5Ghz?

Thanks for clarification...
Yes, of course, they support legacy 802.11n as well. There is a combined ac/n mode as well.
No answer to your question? How to write posts
 
User avatar
rextended
Forum Guru
Forum Guru
Topic Author
Posts: 2950
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: August new products, "ac" and others...

Mon Aug 18, 2014 9:50 pm

Just a quick note, the new CRS109-8G-1S-2HnD-IN is not AC wireless. Sadly the mAP isn't either.
And where is writed which are "ac" models? :shock:
"August new products, "ac" and others... "
I'm Italian, not English. Sorry for my imperfect grammar.
 
User avatar
rextended
Forum Guru
Forum Guru
Topic Author
Posts: 2950
Joined: Tue Feb 25, 2014 12:49 pm
Location: Capalbio, Tuscany, Italy

Re: August new products, "ac" and others...

Mon Aug 18, 2014 9:52 pm

Having "ac" on indoor products are non-sense, because you can interfer yourself with CPE client if you use more than 20+20MHz channel...
I'm Italian, not English. Sorry for my imperfect grammar.
 
paulchops
newbie
Posts: 42
Joined: Sat Feb 02, 2008 6:33 pm

Re: August new products, "ac" and others...

Tue Aug 19, 2014 2:34 am

What antennas can we use with the 3x3 radios ?
 
nwa
newbie
Posts: 28
Joined: Sun Aug 17, 2014 3:02 pm

Re: August new products, "ac" and others...

Thu Aug 21, 2014 1:12 pm

Hello,

i need to buy a new AP for my Wirless and home use indoor...
i want to buy the new R11 with 802.11ac... they fall back to 5ghz n is it right ? ..

what do you think about this interaface for indoor home use in a house ???
is 500mW too much gainpower for organic brains ??? :D

can i use it or is it toooo much for the healthy ?
 
User avatar
CyberTod
Long time Member
Long time Member
Posts: 511
Joined: Wed Jan 25, 2012 10:23 am

Re: August new products, "ac" and others...

Thu Aug 21, 2014 1:35 pm

802.11ac products can fall back to n rates, they will work with older devices.
The output power can be adjusted. You can lower it from the settings and check if you have good coverage.

Who is online

Users browsing this forum: heidarren and 24 guests