Community discussions

MikroTik App
 
Trekkie
newbie
Topic Author
Posts: 37
Joined: Thu Feb 07, 2013 1:48 am

RB922UAGS-5HPacD Question

Sun Aug 31, 2014 5:54 am

I've been waiting for this I hope :)

I'm wanting to replace some old closed access points (indoors) with these. However I'd like to still have backwards compatible 802.11b/g/n radio.

Can i just plug in a R11e-2HPnD to it? Which enclosure do you recommend?

Thank you
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24614
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: RB922UAGS-5HPacD Question

Mon Sep 01, 2014 11:04 am

802.11ac is compatible with a/n by itself. Even if you run a 802.11ac AP, the a/n devices can still use it (unless you configured otherwise).
No answer to your question? How to write posts
 
Trekkie
newbie
Topic Author
Posts: 37
Joined: Thu Feb 07, 2013 1:48 am

Re: RB922UAGS-5HPacD Question

Mon Sep 01, 2014 6:08 pm

:shock: oh, uh, I apparently read wrong I thought 802.11ac was 5Ghz only.
 
rwaters
just joined
Posts: 19
Joined: Sat Jan 28, 2012 5:56 pm
Location: USA

Re: RB922UAGS-5HPacD Question

Mon Sep 01, 2014 6:27 pm

I have rb922UAGS-5HPacD as indoor access point with R11e-2HPnD for 2.4Ghz clients. I modified a case meant for rb411/711.
I still need to drill some holes for antenna pigtails.
You do not have the required permissions to view the files attached to this post.
 
undiU
just joined
Posts: 15
Joined: Fri Aug 15, 2014 10:46 pm
Location: Lithuania

Re: RB922UAGS-5HPacD Question

Wed Sep 03, 2014 10:25 pm

802.11ac is compatible with a/n by itself. Even if you run a 802.11ac AP, the a/n devices can still use it (unless you configured otherwise).
Normis: what about uncomfortable second question? When CA411-711 will be upgraded for rb922? Maybe also 4 antena holes finally? ;)

Who is online

Users browsing this forum: No registered users and 30 guests