Community discussions

MikroTik App
 
Poundbury
just joined
Topic Author
Posts: 14
Joined: Mon Feb 11, 2013 6:51 pm

CCR-1072 release date?

Fri Nov 28, 2014 6:55 pm

Any news on the CCR-1072?
I think it was planned for November 2014, and we're just about done with November.

Mike
 
barhom
just joined
Posts: 2
Joined: Sun Nov 30, 2014 11:07 am

Re: CCR-1072 release date?

Sun Nov 30, 2014 11:10 am

I would also like to know any update regarding the release date.

Mainly because I would love trying this than purchasing a Cisco 7604 router.
 
AlexS
Member Candidate
Member Candidate
Posts: 266
Joined: Thu Oct 10, 2013 7:21 am

Re: CCR-1072 release date?

Tue Dec 02, 2014 6:22 am

Only if it can do > 1Gbps tcp stream
 
hashbang
Member Candidate
Member Candidate
Posts: 157
Joined: Sat Jul 26, 2014 6:38 pm

Re: CCR-1072 release date?

Tue Dec 02, 2014 7:22 am

++1
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1871
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: CCR-1072 release date?

Tue Dec 02, 2014 9:45 am

We need these too.

Dual hot swap power supplies are the main attraction :)
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
barhom
just joined
Posts: 2
Joined: Sun Nov 30, 2014 11:07 am

Re: CCR-1072 release date?

Thu Dec 11, 2014 1:58 pm

Only if it can do > 1Gbps tcp stream
Why wouldn't it be able to do this?
 
IHRMax
just joined
Posts: 5
Joined: Thu Feb 27, 2014 6:35 pm

Re: CCR-1072 release date?

Thu Dec 11, 2014 4:22 pm

++1
 
joegoldman
Long time Member
Long time Member
Posts: 533
Joined: Mon May 27, 2013 2:05 am

Re: CCR-1072 release date?

Sat Dec 13, 2014 7:28 am

Only if it can do > 1Gbps tcp stream
Why wouldn't it be able to do this?
Current model CCR's (even with 10GBit interfaces) appear to be limited to single CPU core per single TCP stream. A CPU core seems to be able to handle around 1gbps traffic, ergo, any single stream appears limited to 1gbps.

ROS7 should fix this problem, and I personally wouldn't be surprised if they held off of 1072 until ROS7 is ready, but on a support ticket I have been told that 1072 will likely release with ROS6
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1871
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: CCR-1072 release date?

Sun Dec 14, 2014 9:08 am

Joe,

Have you had it confirmed ROSv7 will fix the 1Gbit per connection issue ?
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
joegoldman
Long time Member
Long time Member
Posts: 533
Joined: Mon May 27, 2013 2:05 am

Re: CCR-1072 release date?

Tue Dec 16, 2014 5:08 am

Joe,

Have you had it confirmed ROSv7 will fix the 1Gbit per connection issue ?
Unfortunately it is conjecture - but it is a major performance flaw related to the multi-threaded nature of the Tilera CPU's. ROSv7 has been stated to be written in mind of utilising the multi-core architecture, a lot of this talk has been more around processes such as BGP, but one would think offering 10gbit interfaces on the 36 core, and the models we've seen of 1072 in the wild having 8 10gbit ports (if I remember correctly) they would certainly need to support multi gbit TCP streams.

So my 'should' should really be bold, italics, and highlighted (lol) and it is only my personal opinion.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1734
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: CCR-1072 release date?

Tue Dec 16, 2014 8:25 am

Sorry, but i do not get these talks about 1Gbps+ TCP connection
Where do you have actual use for this?

For regular size packets (MTU/MRU 1500)
Latency have to be in microseconds to get such TCP connection speed, so it is impossible over Internet anyway
OK, one can use it in server rooms, but you can easily do it with 10G switch there.

Only possible way to get such TCP speeds is with large size packets (MTU/MRU 65535), but currently it is also impossible over Internet, so we are back to server rooms :)

Maybe in future, but at this point in time this is hardly the biggest issue.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
joegoldman
Long time Member
Long time Member
Posts: 533
Joined: Mon May 27, 2013 2:05 am

Re: CCR-1072 release date?

Wed Dec 17, 2014 6:33 am

Sorry, but i do not get these talks about 1Gbps+ TCP connection
Where do you have actual use for this?

For regular size packets (MTU/MRU 1500)
Latency have to be in microseconds to get such TCP connection speed, so it is impossible over Internet anyway
OK, one can use it in server rooms, but you can easily do it with 10G switch there.

Only possible way to get such TCP speeds is with large size packets (MTU/MRU 65535), but currently it is also impossible over Internet, so we are back to server rooms :)

Maybe in future, but at this point in time this is hardly the biggest issue.
Just because its not current usage requirement doesnt mean it should be limited to that. It is obvious what the problem is, and fixing it now before its a real problem for the general use is a good option. 1 valud example that comes to mind is perhaps private x-connect to another provider in the same DC, for backup or DR purposes.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1734
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: CCR-1072 release date?

Wed Dec 17, 2014 8:57 am

Just because its not current usage requirement doesn't mean it should be limited to that. It is obvious what the problem is, and fixing it now before its a real problem for the general use is a good option. 1 valud example that comes to mind is perhaps private x-connect to another provider in the same DC, for backup or DR purposes.

there are lots of things that are more pressing for improvement than this, so i do not think they should waste time fixing it now. sometimes later yes.
Also i do not agree that it is "obvious what the problem is". Parallel multi-processing is always a hard stuff
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1871
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: CCR-1072 release date?

Wed Dec 17, 2014 9:17 am

We are a cloud services provider and use CCR to leak routes to/from our backups VRF. We can easily generate over 1gbit in a single stream to one of the backup agents.

Not everyone is using these for Internet. ...
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
dottxt
just joined
Posts: 15
Joined: Sun Feb 02, 2014 5:53 pm

Re: CCR-1072 release date?

Sun Dec 28, 2014 9:25 am

We never have problems pushing more than 1gig via TCP on a single connection. I don't think I've seen a single core rise above 3 or 4% when routing a few gig. Keep in mind, we have no queues, no firewall, and fastpath is on, so perhaps thats where you're experiencing the ceiling?
 
ezyclie
just joined
Posts: 17
Joined: Fri Aug 22, 2014 10:40 am

Re: CCR-1072 release date?

Tue Jan 13, 2015 4:20 pm

2015 still no update on this :D
 
paulsa
newbie
Posts: 34
Joined: Tue Oct 29, 2013 10:24 am

Re: CCR-1072 release date?

Wed Jan 14, 2015 1:02 pm

Yup still waiting, in need of a router with at least 4 x SFP+ ports.
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 223
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: CCR-1072 release date?

Thu Jan 15, 2015 4:04 am

we are all here waiting... :)
 
User avatar
roc-noc.com
Forum Veteran
Forum Veteran
Posts: 869
Joined: Sun Dec 02, 2007 3:27 am
Location: Rockford, IL USA
Contact:

Re: CCR-1072 release date?

Mon Jan 19, 2015 6:23 pm

crickets...
-----------------------------------------------
http://www.roc-noc.com
Tom, CCNA, ISP, USA Mikrotik Distributor
888-762-5662
-----------------------------------------------
 
sparky
just joined
Posts: 8
Joined: Thu Jan 22, 2015 12:49 am

Re: CCR-1072 release date?

Thu Jan 22, 2015 1:08 am

++1
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Thu Jan 22, 2015 12:40 pm

Teaser :) not too long now
Screenshot 2015-01-22 12.40.05.png
You do not have the required permissions to view the files attached to this post.
No answer to your question? How to write posts
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1871
Joined: Mon Jan 14, 2008 1:53 pm
Location: Straya
Contact:

Re: CCR-1072 release date?

Thu Jan 22, 2015 9:38 pm

Teaser :) not too long now
Nice work on the CCR-1072 Mikrotik team.

It is looking like a very nice router.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet FTCNA, FCNSP, FCT | Extreme Networks ENA
 
User avatar
sterling
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Tue Jan 18, 2011 8:55 am
Location: Utah
Contact:

Re: CCR-1072 release date?

Fri Jan 23, 2015 12:39 am

Can't wait for this.

I do wish it had more than one Ethernet port, but I guess you can get there with a SFP to copper ethernet adapter anyways.
 
sparky
just joined
Posts: 8
Joined: Thu Jan 22, 2015 12:49 am

Re: CCR-1072 release date?

Fri Jan 23, 2015 6:31 am

Teaser :) not too long now
Cool, thanks for the update!
Last edited by sparky on Fri Jan 23, 2015 11:12 am, edited 1 time in total.
 
MusicCog
just joined
Posts: 20
Joined: Sun Mar 16, 2014 10:27 am

Re: CCR-1072 release date?

Fri Jan 23, 2015 11:07 am

Looking good.
Can't wait.
 
User avatar
43north
Member Candidate
Member Candidate
Posts: 199
Joined: Fri Nov 14, 2014 7:06 am

Re: CCR-1072 release date?

Mon Jan 26, 2015 5:50 am

Any price point ideas yet?
 
joegoldman
Long time Member
Long time Member
Posts: 533
Joined: Mon May 27, 2013 2:05 am

Re: CCR-1072 release date?

Tue Jan 27, 2015 1:21 am

Can't wait for this.

I do wish it had more than one Ethernet port, but I guess you can get there with a SFP to copper ethernet adapter anyways.
This is one reason why SFP+ can be good, the port can basically be what you want it to be, from SM or MM Fiber to Ethernet and other possible SFP+ modules, very versatile and a good option for such large core routers - if you aren't at the point of Fiber Optic x-connects and links, then the 1072 is probably too big for your needs (could be exception to this). This is why things like the 36 core exist, with its configurations of ethernet and SFP/SFP+ ports
 
ezyclie
just joined
Posts: 17
Joined: Fri Aug 22, 2014 10:40 am

Re: CCR-1072 release date?

Tue Jan 27, 2015 9:05 am

any information for the power consumption?
 
User avatar
strods
MikroTik Support
MikroTik Support
Posts: 1438
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Tue Jan 27, 2015 3:16 pm

any information for the power consumption?
On full load average power consumption in room temperature is about 69W.
With low load it is around 59W.
 
User avatar
Kreacher
Member
Member
Posts: 359
Joined: Wed Sep 25, 2013 3:58 pm
Location: Hogwarts

Re: CCR-1072 release date?

Sun Mar 08, 2015 12:50 am

any information for the power consumption?
This is in my eyes not so really interesting, caus of the power of this router!
If you think you will need a CCR1072 device, you will not have a dedicated
look on the power comsumting, as I really see it right, ok gfood to know,
but not really urgent to know.

The CCR1036 routers are equal enough to handle the entire speed to back ward
switches insite the lan area, but with the CCR1072 also 10 GBit/s on the WAN side
can be easily handeled as I see it right. So it is really cool to hear and see that MikroTik
is right testing this device actually know.
Kindly regards
Kreacher ♬

--------------------------------------
Karma points must not be paid by you
 
AlexS
Member Candidate
Member Candidate
Posts: 266
Joined: Thu Oct 10, 2013 7:21 am

Re: CCR-1072 release date?

Mon Mar 09, 2015 2:30 am

Any news on the multi threaded tcp forwarding.

Is it still going to be single cpu and bound to 1Gb
 
joegoldman
Long time Member
Long time Member
Posts: 533
Joined: Mon May 27, 2013 2:05 am

Re: CCR-1072 release date?

Mon Mar 09, 2015 7:00 am

Any news on the multi threaded tcp forwarding.

Is it still going to be single cpu and bound to 1Gb
That is less to do with the 1072 and more to do with ROSv7 (or software in general).

I've been told by support that the 1072 will release before stable ROSv7, so will come shipped with ROSv6, so unless they patch this before moving on to 7, then it may not be 'fixed' by release.
 
User avatar
43north
Member Candidate
Member Candidate
Posts: 199
Joined: Fri Nov 14, 2014 7:06 am

Re: CCR-1072 release date?

Sat Mar 21, 2015 7:20 pm

What is the hold up on the release of the 1072?
 
peper
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Tue Sep 11, 2012 8:45 pm

Re: CCR-1072 release date?

Tue Mar 24, 2015 6:28 pm

Teaser :) not too long now
Screenshot 2015-01-22 12.40.05.png
This ventilation cuts on the top look so extraordinary. Am I wrong or you are imitating some pattern used on national cloths?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Wed Mar 25, 2015 1:34 pm

Teaser :) not too long now
Screenshot 2015-01-22 12.40.05.png
This ventilation cuts on the top look so extraordinary. Am I wrong or you are imitating some pattern used on national cloths?
We certainly started from there
No answer to your question? How to write posts
 
hashbang
Member Candidate
Member Candidate
Posts: 157
Joined: Sat Jul 26, 2014 6:38 pm

Re: CCR-1072 release date?

Sat Mar 28, 2015 3:28 pm

Normis < how long is not too long ???? :P
 
peper
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Tue Sep 11, 2012 8:45 pm

Re: CCR-1072 release date?

Sat Apr 04, 2015 12:33 pm

This ventilation cuts on the top look so extraordinary. Am I wrong or you are imitating some pattern used on national cloths?
We certainly started from there
Awesome! When I visited Riga (it was more than 10 years ago) I bought sweater with such pattern for one of my friends. But it was a bit more colourfull.

Present you an idea: Now you have at least 4 colors used in different lines of your devices as well as this pattern. When you have some anniversary of Mtk or other special ocasion (*illion devices sold), you can combine colors and pattern and produce some limited edition of some device. Pity, that April, 1st is in the past. But can return to this next year: :)
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 223
Joined: Tue Mar 08, 2011 2:52 am
Location: Vaprio d'Agogna (NO) - Italy
Contact:

Re: CCR-1072 release date?

Wed Apr 22, 2015 2:56 pm

I think there is a conspiracy... other vendors are paying Mikrotik to not release the CCR-1072 because it would disrupt the market, and therefore we are here waiting like baked pears. :D :D
 
ZacGowen
just joined
Posts: 1
Joined: Mon Apr 27, 2015 9:04 pm

Re: CCR-1072 release date?

Mon Apr 27, 2015 9:33 pm

[quote="normis"]Teaser :) not too long now

We are looking to replace 10 of our core Cisco switches with Mikrotik CCRs. The CCR-1072 would be perfect but we need to know when they will be available. What is the value of "not too long" in calendar months?
 
User avatar
43north
Member Candidate
Member Candidate
Posts: 199
Joined: Fri Nov 14, 2014 7:06 am

Re: CCR-1072 release date?

Tue Apr 28, 2015 8:57 am

Agreed, +1 on release time frame
 
jarda
Forum Guru
Forum Guru
Posts: 7603
Joined: Mon Oct 22, 2012 4:46 pm

Re: CCR-1072 release date?

Tue Apr 28, 2015 5:37 pm

Teaser :) not too long now

We are looking to replace 10 of our core Cisco switches with Mikrotik CCRs. The CCR-1072 would be perfect but we need to know when they will be available. What is the value of "not too long" in calendar months?
Why to replace switches by routers?
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1189
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: CCR-1072 release date?

Tue Apr 28, 2015 6:19 pm

UPDATE on CCR1072 (unofficial):

Word on the street from the USA MUM in Miami is that the 1072 should be here by summer. According to what we heard from MT at the conference, there were some issues with packet loss in the RFC pattern/throughput testing that had to be corrected before it could be certified and that involved some minor hardware changes. I believe it was stated there were some compatibility issues with non-mikrotik ethernet connections that also related to the hardware change.

The 1072 is a killer box...we got to see in depth demos in Miami and it was pushing close to 80 Gbps between two of them.
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
User avatar
43north
Member Candidate
Member Candidate
Posts: 199
Joined: Fri Nov 14, 2014 7:06 am

Re: CCR-1072 release date?

Thu Apr 30, 2015 6:17 am

Thanks for the update! Sounds like it will be worth the wait!!!
 
User avatar
43north
Member Candidate
Member Candidate
Posts: 199
Joined: Fri Nov 14, 2014 7:06 am

Re: CCR-1072 release date?

Thu Jul 02, 2015 8:17 am

tik.JPG
You do not have the required permissions to view the files attached to this post.
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1189
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: CCR-1072 release date?

Fri Jul 10, 2015 6:18 am

Here is a review of the CCR 1072 with Pics

http://www.stubarea51.net/2015/07/10/mi ... use-cases/
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Fri Jul 10, 2015 8:43 am

Here is a review of the CCR 1072 with Pics

http://www.stubarea51.net/2015/07/10/mi ... use-cases/
review shows pre-production unit. final version will have slightly different internals.
No answer to your question? How to write posts
 
i4jordan
Frequent Visitor
Frequent Visitor
Posts: 77
Joined: Mon Sep 02, 2013 1:42 am

Re: CCR-1072 release date?

Fri Jul 10, 2015 4:00 pm

It has arrived!
http://routerboard.com/CCR1072-1G-8Splus

Pricing is fair US$ 3050
 
paulsa
newbie
Posts: 34
Joined: Tue Oct 29, 2013 10:24 am

Re: CCR-1072 release date?

Fri Jul 17, 2015 10:37 am

Can anyone confirm that the 10Gbps interfaces can run the 1Gbps fibre modules?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Fri Jul 17, 2015 10:46 am

Can anyone confirm that the 10Gbps interfaces can run the 1Gbps fibre modules?
From the manual:
  • IEEE802.3ae 10GBASE-SR and 10GBASE-LR modules made for up to 10KM distance. Including 10G Direct Attach Copper (DAC).
    IEEE802.3z 1000BASE-SX and 1000BASE-LX modules made for up to 20KM distance.
No answer to your question? How to write posts
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1189
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: CCR-1072 release date?

Sun Jul 19, 2015 1:17 am

Preview of our BGP testing on the CCR1072-1G-8S+

1.69 Million routes in under 3 minutes from 4 peers :-)

http://www.stubarea51.com/2015/07/18/mi ... e-preview/
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
andersonlich
Frequent Visitor
Frequent Visitor
Posts: 55
Joined: Thu Feb 26, 2009 1:05 pm

Re: CCR-1072 release date?

Wed Jul 22, 2015 4:25 am

Can we plug a SFP using 1GE-SFP ? or it just fixed to 10GE-SFP+ ?
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 1772
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: CCR-1072 release date?

Wed Jul 22, 2015 4:55 am

Can anyone confirm that the 10Gbps interfaces can run the 1Gbps fibre modules?

i think its better to use only 10g modules
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2314
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: CCR-1072 release date?

Wed Jul 22, 2015 9:31 am

It works with 1Gbit modules. Only S-RJ01 is not supported
http://wiki.mikrotik.com/wiki/MikroTik_ ... lity_table
LAN, FTTx, Wireless. ISP operator
 
YakCo
just joined
Posts: 23
Joined: Fri Mar 07, 2008 9:04 pm
Location: Washington State, USA

Re: CCR-1072 release date?

Thu Jul 23, 2015 12:44 am

Thanks, but the link is not working...
http://www.stubarea51.com/2015/07/18/mi ... e-preview/

Dean
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Thu Jul 23, 2015 9:04 am

No answer to your question? How to write posts
 
paulsa
newbie
Posts: 34
Joined: Tue Oct 29, 2013 10:24 am

Re: CCR-1072 release date?

Thu Jul 23, 2015 3:18 pm

Can anyone confirm that the 10Gbps interfaces can run the 1Gbps fibre modules?

i think its better to use only 10g modules
All very well, but not all our devices are 10gbps capable. If we could only use 10gbps modules then we would only currently be able to use 2-3 of the ports (i.e not financially viable).
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Thu Jul 23, 2015 3:23 pm

No answer to your question? How to write posts
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 1772
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: CCR-1072 release date?

Thu Jul 23, 2015 4:34 pm

Can anyone confirm that the 10Gbps interfaces can run the 1Gbps fibre modules?

i think its better to use only 10g modules
All very well, but not all our devices are 10gbps capable. If we could only use 10gbps modules then we would only currently be able to use 2-3 of the ports (i.e not financially viable).

your point are rigth, for example if you dont need the 10 gig just plug a switch with one 10g port and the 1g port count of your need
 
YakCo
just joined
Posts: 23
Joined: Fri Mar 07, 2008 9:04 pm
Location: Washington State, USA

Re: CCR-1072 release date?

Thu Jul 23, 2015 5:00 pm

Thanks !!
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1189
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: CCR-1072 release date?

Sat Jul 25, 2015 4:28 am

Here is Part 2, which is the full BGP review on the CCR-1072-1G-8S+. Enjoy!

http://www.stubarea51.net/2015/07/25/mi ... rformance/
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
paulsa
newbie
Posts: 34
Joined: Tue Oct 29, 2013 10:24 am

Re: CCR-1072 release date?

Mon Jul 27, 2015 2:19 pm


your point are rigth, for example if you dont need the 10 gig just plug a switch with one 10g port and the 1g port count of your need
Yup that is always an option, but I was more thinking of e.g connecting our existing CCR1036's to the 1072, which we can now do.
 
doush
Long time Member
Long time Member
Posts: 636
Joined: Thu Jun 04, 2009 3:11 pm

Re: CCR-1072 release date?

Mon Jul 27, 2015 10:10 pm

I dont know what will be the use of 72cores when RouterOS cant even utilize 36 cores already.

PPP-No multi-threading
Simple Queses- No multithreading

What would you do with a 72x core router if you wont be able to use it as a Broadband Access Concentrator ?
 
Clbh
just joined
Posts: 20
Joined: Tue May 12, 2015 5:22 am

Re: CCR-1072 release date?

Tue Jul 28, 2015 2:43 pm

I dont know what will be the use of 72cores when RouterOS cant even utilize 36 cores already.

PPP-No multi-threading
Simple Queses- No multithreading

What would you do with a 72x core router if you wont be able to use it as a Broadband Access Concentrator ?
10Gbps-capable IP core/MPLS P-router?

It has massive potential as a really cheap and affordable non-edge-facing device.

Some of the edge-facing functionality (external BGP peerings or PPP termination) will have to wait until RouterOS v7, sure, but that diminishes by nothing the current potential of the hardware.
 
doush
Long time Member
Long time Member
Posts: 636
Joined: Thu Jun 04, 2009 3:11 pm

Re: CCR-1072 release date?

Tue Jul 28, 2015 7:19 pm

1072 will be around $2500 new and considering the current situation of the RouterOS, it wont have any advantage over 1036 at all for me.

For example we terminate 800xPPPoE sessions on a 1036 now, and one of the cores hit %80 utilization with only dynamic simple queues.

You can get used <other vendor> gear to terminate 1000s of users within the same price scope.

I hope new releases will prove me wrong.
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1189
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: CCR-1072 release date?

Tue Jul 28, 2015 10:16 pm

I dont know what will be the use of 72cores when RouterOS cant even utilize 36 cores already.

PPP-No multi-threading
Simple Queses- No multithreading

What would you do with a 72x core router if you wont be able to use it as a Broadband Access Concentrator ?
When you get into really large networking (10,000+ routers) services are distributed across a wide array of devices, so usually, the routers don't handle firewalling or any kind of service aggregation/termination or quality assurance like PPPoE or Individual subscriber queues. There will be a large collection of core routers that simply just route traffic as quickly as possible to and from edge/distribution areas of the network.

Most large data centers and service providers measure routing capacity in the terabits, so 80 Gbps becomes an extremely attractive option as a pure router or MPLS router for under 3k.

Since we also do design work for Cisco based data centers, I can give you the rough CAPEX savings pretty easily. The average Cisco Data Center we work on will require 1 to 2 million USD to put in a routing core capable of Terabit routing with a Nexus 7K/5K/2K deployment.

A CCR1072 can be used in an ECMP routed deployment to get to terabit with at least 13 CCRs for under 50,000 USD plus whatever switching layer you want to use which means you will be probably be under $150,000 for the entire deployment.

So...... :D

MikroTik + your favorite data center switch = $150,000
Cisco deployment = 1 to 2 million.

And to top it all off, I have had 3 times as many bugs to deal with this past year in the Cisco Nexus world as I have with MikroTik, so the extra money spent does not mean guaranteed stability.
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
doush
Long time Member
Long time Member
Posts: 636
Joined: Thu Jun 04, 2009 3:11 pm

Re: CCR-1072 release date?

Thu Jul 30, 2015 3:14 pm

This is a very limited and a niche market you are referring too. And you are right.

But %99 of us will still try to do firewalling/NATing + access concentration on these things along with BGP.
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1189
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Re: CCR-1072 release date?

Thu Jul 30, 2015 5:44 pm

I'm not really sure data center and service provider is a niche market. :D

3.5 Trillion dollars are predicted to be spent in IT/Technology globally in 2015. If you look at the breakdown, Data Center and Telecommunications make up close to half of that 3.5 Trillion.

http://www.gartner.com/technology/resea ... -forecast/

MikroTik is working hard to get into these sectors because that's where most of the money in network technology is spent globally
Global - MikroTik Support & Consulting - English | Francais | Español | Portuguese +1 855-645-7684
https://iparchitechs.com/services/mikro ... l-support/ mikrotiksupport@iparchitechs.com
 
doush
Long time Member
Long time Member
Posts: 636
Joined: Thu Jun 04, 2009 3:11 pm

Re: CCR-1072 release date?

Fri Jul 31, 2015 1:11 pm

This still doesnt justify the multi-threading incapability of RouterOS.
We need PPP and simple queues multi-threaded otherwise even 1000 cores is a joke.
 
Clbh
just joined
Posts: 20
Joined: Tue May 12, 2015 5:22 am

Re: CCR-1072 release date?

Fri Jul 31, 2015 3:18 pm

This still doesnt justify the multi-threading incapability of RouterOS.
We need PPP and simple queues multi-threaded otherwise even 1000 cores is a joke.
Have patience..

All signs that have been revealed until now point to RouterOS v7 being a complete game changer for the CCR lineup.

Until then, whining about lack of performance is not going to help anyone. As a professional, you should be ready to look at alternative solutions to provide the outcomes you currently require.
 
shahram123
just joined
Posts: 1
Joined: Mon Aug 03, 2015 6:03 pm

Re: CCR-1072 release date?

Mon Aug 03, 2015 6:07 pm

hi guys
what is the "M.2 slots accept 800mm Key-M x4 PCIe 2.0 modules"
I can not find it in pictures, this is one chip? or slot?! inside or outside?
thanks
 
uldis
MikroTik Support
MikroTik Support
Posts: 3439
Joined: Mon May 31, 2004 2:55 pm

Re: CCR-1072 release date?

Wed Sep 09, 2015 3:39 pm

hi guys
what is the "M.2 slots accept 800mm Key-M x4 PCIe 2.0 modules"
I can not find it in pictures, this is one chip? or slot?! inside or outside?
thanks
You can put into those slots M.2 SSD drives that uses PCIe. You can use, for example, SAMSUNG SM951 M.2 drive or HyperX Predator PCIe SSD M.2 drive.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: CCR-1072 release date?

Wed Sep 09, 2015 3:45 pm

hi guys
what is the "M.2 slots accept 800mm Key-M x4 PCIe 2.0 modules"
I can not find it in pictures, this is one chip? or slot?! inside or outside?
thanks
M.2 is a slot type.
https://en.wikipedia.org/wiki/M.2

CCR1072 has two of them
No answer to your question? How to write posts

Who is online

Users browsing this forum: lkeszt and 30 guests