Any more news about CCR1009-8G-1S-1S+PC model ?

Deleted because not related

honzam - can You read?
So - just READ CAREFULLY .....+PC - can You see difference ?? YES - that is NEW model !

honzam - can You read?

Next time please more decency

More info there:

OMG! CCR1009+PC is the one! I can't wait to see it.

What is the power consumption?
When it will be available?

Awesome for home users.

@rzirzi: My current CCR1009-8G-1S-1S without SFP/Ethernet ideling around 18W and 23W with 2 SFP's + 5 Ethernet Connections. Most time my CCR running with one fan, i thinks that the PC model without fans is around 1-2W less.

Passively cooled device with speed controlled fan? Is this some new definition of passive cooling?

Anyway the renders look very good.

Passively cooled device with speed controlled fan? Is this some new definition of passive cooling?

I think - it is bug in brochure

Darn, I almost wish I had not bought a 850Gx2. Anyway it will do for now. Only downside I can see is the low amount of NAND-storage compared to the 850Gx2 and the 450G

It has card reader, so no need for big flash.

wow, waiting eagerly to buy this cute Router for my home network in Jakarta, Indonesia.

Hope Mikrotik got plan to add WiFi to this router in the future

now on webpage: http://routerboard.com/CCR1009-8G-1S-1SplusPC

now on webpage: http://routerboard.com/CCR1009-8G-1S-1SplusPC

Now that this is officially up on the Mikrotik site, I'm wondering if someone from Mikrotik could comment if this passively cooled model would be a better option than the other CCR1009 models for solar powered sites? How much difference should we expect to see in power consumption compared to the fan based models? Is the operating temperature range greater, lower, or the same as the other CCR1009 models?

I was wondering with the temperature too under heavy load.

Btw when can we expect the router availability in Jakarta, Indonesia?

according to specs it has a 1ghz cpu that is 200mhz less than "normal" ccr1009 surely its to lower the power consumption.

will be nice to have power consumption info

according to specs it has a 1ghz cpu that is 200mhz less than "normal" ccr1009 surely its to lower the power consumption.

will be nice to have power consumption info

Didn't notice the CPU speed. If you are looking at "Performance test results" table they are having same performance BUT I am not sure if Mikrotik copy paste the table lol

CPU reduction shouldn't matter to me. The CCR1009-8G-1S-1S I have is an absolute beast from hell. It's CPU changes between 0 and 2% during peak network times. It's like it's laughing at everything I throw at it. I love it! It replaced an RB1200 that had its CPU average around 25-35% during peak times with the same config. I'm foaming at the mouth for a CCR1009-8G-1S-1S+PC. However, I'm worried it might be a bit deeper with those heatsink fins sticking out the back. Might not fit in my outdoor enclosures. It seems like Mikrotik just keeps making their routers deeper and deeper. Kinda wish they would try and stick with the same form factor...

Hmmm can not find this product even in the Europe

Hmmm can not find this product even in the Europe

It was just released to distributors. Still flying to them. Wait a few days

Hmmm can not find this product even in the Europe

It was just released to distributors. Still flying to them. Wait a few days

Hi normis, thanks for your information, waiting eagerly to buy this router even from oversea distributor

Would somebosy clear, can it work with two SPF modules (like S-31DLC20D)?
In other words, in this router SFP+ sloth is compatible with SFP modules, to build ring?

I am considering upgrading to a 250mbps download link at home, so I was thinking about getting this because it is fanless.

But I am disappointed by its ability to perform with whatever VPN method I might be forced to use compared to the RB1100AHx2.

But the RB1100 is out of the question because of the fans and it also seems like expensive old tech (not old architecture).

But I am disappointed by its ability to perform with whatever VPN method I might be forced to use compared to the RB1100AHx2.

Can you be a little more specific on what you mean by that? Both of them support ALL VPN methods RouterOS has to offer...

I am thinking about GRE/IPSEC for example, because GCM is not hardware-based at the moment, and there is not roadmap for it.

Now with the new units it looks like they are ready to be used with a -48v DC environment as-well ? It had been great if the new units could have some real screw terminals for power and not just the dc adapter input.

They had been great for us at least if they had that.

I am thinking about GRE/IPSEC for example, because GCM is not hardware-based at the moment, and there is not roadmap for it.

Where did you get this information about GCM?

I am thinking about GRE/IPSEC for example, because GCM is not hardware-based at the moment, and there is not roadmap for it.

Where did you get this information about GCM?

Search for GCM, Mikrotik said it.

Would somebosy clear, can it work with two SPF modules (like S-31DLC20D)?
In other words, in this router SFP+ sloth is compatible with SFP modules, to build ring?

Yes, it is not clear in the documentation so I just verified this for a customer. Both of the CCR1009 1S+ models link up with a standard SM SFP (S-31DLC20D) in the SFP+ ports and a SM fiber connection. I also checked an SFP+ port to an SFP port and that works as well in the CCR1009 with 1S+.

Tom

according to specs it has a 1ghz cpu that is 200mhz less than "normal" ccr1009 surely its to lower the power consumption.

will be nice to have power consumption info

Didn't notice the CPU speed. If you are looking at "Performance test results" table they are having same performance BUT I am not sure if Mikrotik copy paste the table lol

performance test now are updated and shows a little less performance on passive model

inside photo