Oh c'mon guys, why do even bothering to release this crap, while we had 750UP ? We now need to power Gbit equipment, not the FE anymore. Or at least 1 GBE port for backhouls. This year is to move to Gbit backhouls. When mikrotik is planning to release such product? Just dont do that mistakes that ubnt did with TS5/8 tiny small buffer that is not capable to forward good throuhtput from 1000 to 100mb/s...

http://routerboard.com/RB260GSP

but no gig with poe

This is not RouterOS device...

This is not RouterOS device...

Yes, it is! It is a very similar to a RB750UP in an outdoor case

I was talking about RB260GSP
So normis, please reveal when mikrotik going to release Gbit poe RB ?

Sorry, my mistake.

Yes, We are working on Gbit PoE out devices.

OK, good news. What size of buffer for switching is provided?

http://routerboard.com/RB260GSP

but no gig with poe

It is gigabit with POE.

http://routerboard.com/RB260GSP

but no gig with poe

It is gigabit with POE.

but

This is not RouterOS device...

Sorry, my mistake.

Yes, We are working on Gbit PoE out devices.

Please make input voltage 12-57V. Thanks

Sorry, my mistake.

Yes, We are working on Gbit PoE out devices.

Thank you Mikrotik!!!

I hope these are 802.3af

i'm sorry if OOT,
any solution for wireless dual band AC router box?
when does mikrotik make 951G-52HPACD ?

I have 2 new 750P-PB and both of them will not power up a Mikrotik or Tranzeo device.
It will work ok on a Ubiquity.
I get "short curcit" on all the RB's.
I tried a New SXT Lite5, RB411 and a RB912UAG-5HPnD.
When I plug in a 750UP they all work fine.

Try set:

Thank you.
Setting the long cable worked.