Community discussions

MikroTik App
 
Nando_lavras
newbie
Topic Author
Posts: 35
Joined: Tue Jul 11, 2006 4:38 am

Lost Connection after configuration

Tue Jul 11, 2006 4:50 am

Hi all, is my first message and i bring to all...... problems... i have purchased one mikrotik routerboard and i start configuring the same, in the bridge configuration i have activated some options and i lost connectivity to the router, i have radio signal, and the MAC appears to me, but the router not respond and i not login in the router.... how i reset the configuration of the router? i not have a serial cable...
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6630
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Tue Jul 11, 2006 8:01 am

1) Connect RouterBOARD's Ethernet port to the same network with your PC, try to access router via Ethernet (put router's MAC-address to Winbox).

2) Find null modem (serial) cable.
 
Nando_lavras
newbie
Topic Author
Posts: 35
Joined: Tue Jul 11, 2006 4:38 am

Tue Jul 11, 2006 12:54 pm

1) Connect RouterBOARD's Ethernet port to the same network with your PC, try to access router via Ethernet (put router's MAC-address to Winbox).

2) Find null modem (serial) cable.
Greeeeeeeeeeeeaaaaaaaatttttttttt......... i able to connect to router again, and i disabled the bridge function and i have now normal access again to the router THANKS sergejs. :D

Who is online

Users browsing this forum: glueck05, inteq and 36 guests