It does not work in LTE and it also does not work as a ppp-client. That is why I am trying to disable Hilink mode, to get it to work as ppp-client.Do you mean that it doesn't work as a LTE nor as a ppp-client interface?
Where could I find the firmware? It is not available on huawei's site.you could tru to flesh different firmware that have vendor-id="0x12d1" device-id="0x14dc"
Is there any info, when v7 will be available?we will support mbim in v7
Has anyone tried E173 and confirm this?E173 should work using serial ppp-out interface
Alright, I found and generated a supout.rif file, but where can I find E3372 mbim interface, or what is it ?coul you send supout to email@example.com
with E3372 with that mbim interface ?
FF before ; enables debug mode, in this mode you wil have all ports enabledFF - Dummy (disable modeswitch setting this to the initial mode?)
at^getportmode ^GETPORTMODE: TYPE: WCDMA: huawei,rndis:1,pcui:2,c_shell:3,a_shell:4,3g_diag:5,gps:6,4g_diag:7,mass:8, OK
hellowMine E3372h is working well with RouterOS after flashing it to a HiLink mode. I have a LTE interface appearing, and after getting DHCP address from modem's internal router I have access to the Internet.
Plenty of information. Personally I've used russian 4PDA forum topic.hellow
Im Rangga from Indonesia.. i have 4G LTE Huawei modem E3372, but it dont work in Mikrotik router RB951G-2HnD, the router can't found LTE interface of modem..
can u help me please ?
tell me how to flashing my modem into a HiLink mode