Community discussions

MikroTik App
 
nikola89381
newbie
Topic Author
Posts: 26
Joined: Wed May 17, 2017 4:46 pm

6.47.10 failure: frequency 66960 not supported on this interface

Tue Jun 15, 2021 12:06 pm

Hi Guys,

I updated wap60 and nRay60 Ghz devices to 6.47.10, and got freq 66960 Mhz, but when i select it I get the following error

failure: frequency 66960 not supported on this interface.

Do you have any info, is this freq can be used?

Image

Thanks s lot,
Best regards
Nikola
 
nikola89381
newbie
Topic Author
Posts: 26
Joined: Wed May 17, 2017 4:46 pm

Re: 6.47.10 failure: frequency 66960 not supported on this interface

Tue Jun 15, 2021 1:29 pm

This works on 6.48.2 version
 
velk1001
newbie
Posts: 49
Joined: Wed Sep 23, 2020 4:01 pm

Re: 6.47.10 failure: frequency 66960 not supported on this interface

Tue Jun 15, 2021 7:05 pm

Mikrotik support wrote

this will be available on new 802.11ay hardware.
Unfortunately this cannot be used reliably on our existing 802.11ad devices - that is why this frequency support is removed
 
Cablenut9
Member
Member
Posts: 452
Joined: Fri Jan 08, 2021 5:30 am

Re: 6.47.10 failure: frequency 66960 not supported on this interface

Tue Jun 15, 2021 9:02 pm

Mikrotik support wrote

this will be available on new 802.11ay hardware.
Unfortunately this cannot be used reliably on our existing 802.11ad devices - that is why this frequency support is removed
Sad, because Ubiquiti supports 71GHz on their 802.11ad hardware, which is way higher.
Serial question asker
 
toxicfusion
Member Candidate
Member Candidate
Posts: 213
Joined: Mon Jan 14, 2013 6:02 pm

Re: 6.47.10 failure: frequency 66960 not supported on this interface

Wed Jun 23, 2021 9:28 pm

Mikrotik support wrote

this will be available on new 802.11ay hardware.
Unfortunately this cannot be used reliably on our existing 802.11ad devices - that is why this frequency support is removed
Sad, because Ubiquiti supports 71GHz on their 802.11ad hardware, which is way higher.
Just because Ubiquiti supports it on their hardware doesnt mean it is good nor reliable.... I think MikroTik doing a smart thing, also this will push new hardware sales to MikroTik. Refresh cycle. As I'm sure all new equipment will have ARM processors and support rOS 7....

Who is online

Users browsing this forum: No registered users and 18 guests