Community discussions

MUM Europe 2020
 
Bourbon
just joined
Topic Author
Posts: 15
Joined: Thu Dec 12, 2013 3:27 pm

Rx sensibility radio

Fri Nov 06, 2015 4:29 pm

Hello,

I have a problem on a site.
I have many interferences. (many networks with a signal strength between -76 and -96 dB)
Is it possible de modify the RX sensibility?
Actually the sensibility is -96db approximately, I wouldlike change it at the value -80dB.

Because, I enable DFS and the DFS change my frequency every time!
I haven't choise, I must keep the DFS.

Thank you for your help.
 
ericnyamu
newbie
Posts: 32
Joined: Sat Jul 25, 2015 9:27 pm

Re: Rx sensibility radio

Mon Nov 09, 2015 4:22 pm

if you increase sensitivity you are also increasing noise so better find another quieter channel
 
n21roadie
Forum Guru
Forum Guru
Posts: 1896
Joined: Fri Aug 07, 2009 10:36 pm
Location: Limerick,Ireland

Re: Rx sensibility radio

Mon Nov 09, 2015 4:35 pm

What type of antenna is being used!
N21roadie,
Network 100% MT for Now?
 
gtj
Member Candidate
Member Candidate
Posts: 119
Joined: Thu Apr 30, 2015 2:52 am
Location: Colorado US

Re: Rx sensibility radio

Mon Nov 09, 2015 11:10 pm

You can try setting Noise Floor Theshold in advanced wireless settings..
 
Bourbon
just joined
Topic Author
Posts: 15
Joined: Thu Dec 12, 2013 3:27 pm

Re: Rx sensibility radio

Thu Nov 12, 2015 5:39 pm

Hello,

Thank you for yours answers.

I use directive antenna. 9°/9°

I choised the best Channel.
I tested to modify the noise floor treshold. I set it at -100dB (-110dB by default.) and and my link was worst.

I enabled adaptive noise immunity,
changed HW-retry to 15,
enabled multicast helper,
tested all wireless protocol.

Others Ideas?
Thank you

Who is online

Users browsing this forum: Google [Bot] and 26 guests