Community discussions

MikroTik App
Topic Author
Posts: 349
Joined: Sun Oct 30, 2005 9:30 pm
Location: Denmark

RB112 as AP

Mon Aug 21, 2006 3:45 pm


Anybody testet how many users a RB112 can handle @ 11Mbit (b) ?

I am thinking of replacing a RB532 with an omni with 3 RB112's with 120 deg. Sectors instead of putting 3 cards in the RB532..

Any comments?

Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Fri Aug 04, 2006 3:44 pm

Re: RB112 as AP

Fri Aug 25, 2006 4:43 pm

have working userer like this .. 4x128 6x256 and 2x512 ...
on one RB112 ... users are PPPoE but RB is not PPPoE SERVER it hat IPoE tunnel to stroooonger machine :)
and it's working ... but nit like when we put PIII in his place :) same miniPCI in PCI adapters ... but lower latency . stronger signal .. do not know ...
RB112 is end user ... CPE :)
Member Candidate
Member Candidate
Posts: 109
Joined: Mon Feb 14, 2005 6:32 pm
Location: Coralville, IA

Fri Aug 25, 2006 10:17 pm

I would not suggest using a 112 as anything but a very simple AP. It doesn't have the memory to handle anything complex like PPPoE or Hotspot, and is rather fragile with OSPF running. 16MB RAM doesn't go very far, and if the free memory falls much below 1500k free, you'll start getting lockups or erratic performance.

However, to answer your question, I've seen 18-20Mbit through a RB112 using 5.8ghz.


Who is online

Users browsing this forum: No registered users and 31 guests