Community discussions

MUM Europe 2020
 
User avatar
chvdr
Member
Member
Topic Author
Posts: 403
Joined: Thu Sep 22, 2005 8:53 pm

5km link: sig. strnght -83dBm, but associating/reassociating

Sat Aug 26, 2006 2:40 am

hi there!

we have a big prob with a stupid situation.
two MT boxes with 23dB antenna grid and atheros ar5212 pci very cheap cards. we done a 5km link. signal str. is -83dBm. but wireless cards doin' reassociation once every 2-3 seconds. log entry is smt like that: deauth: authentication not valid (2).

is there anybody who knows what log entry means (deauth: uthentication not valid (2).)

regards,
C. G.




P. S. Aaah... here is a log:

/log pr
...
...
21:14:41 wireless,info wlan1: disconnected 00:14:78:75:8E:E6, got deauth: authentication not valid (2)
21:14:42 wireless,info wlan1: 00:14:78:75:8E:E6 connected
21:14:42 wireless,info wlan1: disconnected 00:14:78:75:8E:E6, got deauth: authentication not valid (2)
21:14:43 wireless,info wlan1: 00:14:78:75:8E:E6 connected
21:14:43 wireless,info wlan1: disconnected 00:14:78:75:8E:E6, got deauth: authentication not valid (2)
21:14:44 wireless,info wlan1: 00:14:78:75:8E:E6 connected
21:14:44 wireless,info wlan1: disconnected 00:14:78:75:8E:E6, got deauth: authentication not valid (2)
21:14:45 wireless,info wlan1: 00:14:78:75:8E:E6 connected
 
User avatar
airstream
Member Candidate
Member Candidate
Posts: 188
Joined: Fri Feb 03, 2006 6:33 am
Location: New Zealand

Sat Aug 26, 2006 4:45 am

Hi there, here are some things to check in the winbox console:

You have either "default authenticate" in the card setting, or have the client's mac address listed in the access table for that card.

also try "dynamic" ack timing, be sure its not "indoor".
Keep tryin' its bound to work!!
-----
-----
ROOT@COSMOS> Reality.sys corrupted -- Reboot Universe (Y/N)?
>_
 
jo2jo
Forum Veteran
Forum Veteran
Posts: 969
Joined: Fri May 26, 2006 1:25 am

Sat Aug 26, 2006 7:47 am

see i get these messages occasionally too and i do have default authenticate on.

no explanation i've been able to find so far for it..
 
User avatar
chvdr
Member
Member
Topic Author
Posts: 403
Joined: Thu Sep 22, 2005 8:53 pm

Sat Aug 26, 2006 9:33 am

Hi there, here are some things to check in the winbox console:

You have either "default authenticate" in the card setting, or have the client's mac address listed in the access table for that card.

also try "dynamic" ack timing, be sure its not "indoor".
hi,

default authenticate checked;
ack is dynamic;
mac is in the access list.

i have never seen log entries before and i just wonder what they mean.


regards,
C. G.
 
User avatar
chvdr
Member
Member
Topic Author
Posts: 403
Joined: Thu Sep 22, 2005 8:53 pm

Sat Aug 26, 2006 9:42 am

hi,

same cards with antenna equipment are in 7 km. link. signal is -78, 811g, nstreme - 12Mbps tests.

is the problem we talkin' about a poor signal or what...

regards,
C. G.

Who is online

Users browsing this forum: Google [Bot], mmyigit and 23 guests