Page 1 of 1

Security problems

Posted: Fri Sep 15, 2006 2:08 am
by EbeltoftsNet
HI
I will heard if is possibly to to use web-key on stastic ip adrress And no cryp on DHCP (hotspot)
on the same AP

Hope I can or there is a way in the hotspot modul

THANKS 8)

Posted: Fri Sep 15, 2006 4:41 am
by jo2jo
what is question?

Posted: Fri Sep 15, 2006 1:48 pm
by normis
what exactly you want to do?

Posted: Fri Sep 15, 2006 11:32 pm
by EbeltoftsNet
I am sorry, I :oops: try again
I use static ip address with web security, that’s ok
I use the Hotspot with DHCP, is that possibly to use that without security?
Or can you do that the DHCP clients get security automatic? The same as my clients
Both is using the same ap card b/g or it is the hard way to set up ap for both dhcp / static client

Posted: Wed Sep 20, 2006 1:09 pm
by spire2z
I think he means is it possible to run a HotSpot with WEP running?

Posted: Wed Sep 20, 2006 1:31 pm
by EbeltoftsNet
yes, thats rigth, because now I have to set Web security before getting the dhcp adr. that have to be automatic

Posted: Wed Sep 20, 2006 2:29 pm
by sergejs
If you want to use wireless encryption between AP and client, anyway client's wireless interface preconfiguration will be required to accomplish it.
Wireless security is intended to secure communication between AP and clients, to decrease possibility of unauthorized access to the AP.

Posted: Wed Sep 20, 2006 8:42 pm
by ofasa
You should be able to achive this using two virtual AP interfaces with the hotspot running on the inerface that's unencrypted.

Posted: Thu Sep 21, 2006 1:11 am
by EbeltoftsNet
You should be able to achive this using two virtual AP interfaces with the hotspot running on the inerface that's unencrypted.
Sound like a god ide, but can't the client get the encryption automatic when they get the dhcp adress
Have try to look in the manual ??

Posted: Thu Sep 21, 2006 10:15 am
by sergejs
No, if you want to use encryption over wireless link, you will not set it without any preconfiguration on the client interface.