Community discussions

 
drdedus
just joined
Topic Author
Posts: 14
Joined: Thu Mar 17, 2016 6:24 pm

how to route ssid2 and ether5 clients through pptp out?

Sat May 21, 2016 2:04 am

hello
I have the Mt with default options . 192.168.88.1
is getting internet through a modem in ether1 with dmz.
I created a "pptp out" interface and is connected to the vpn server as I see in status (10.1.1.90 and gateway 10.1.1.1 ) .

After I created a second ssid .

1)How can i force the "ssid2" and the "ether5" clients to go through the "pptp out" ?

2)How I choose the clients to get ip directly from the vpn server
and now i create a nat so they get the ip range I decide?
 
haik01
Member
Member
Posts: 406
Joined: Sat Mar 23, 2013 10:25 am
Location: Netherlands

Re: how to route ssid2 and ether5 clients through pptp out?

Sat May 28, 2016 10:46 pm

For number 1: I assume, you have twoo SSID's:

1. test 1
2. test 2

You want that clients which connect to test 2 will go through the VPN.

Easy:

Create a second Virtual AP. Fill in all the details, SSID, profile etc...
Add another bridge and put in that bridge the virtual AP, and ehternet 5, and the PPTP out. Done. Make sure that ethernet 5 has no master port.
 
drdedus
just joined
Topic Author
Posts: 14
Joined: Thu Mar 17, 2016 6:24 pm

Re: how to route ssid2 and ether5 clients through pptp out?

Mon May 30, 2016 3:07 pm

thank you very much.
i have done that but the problem is i can not get local ip.
i have made a second pool for pptp and i made a second dhcp server but the problem is there.

Who is online

Users browsing this forum: No registered users and 27 guests