Community discussions

 
wireless12
Member Candidate
Member Candidate
Topic Author
Posts: 295
Joined: Fri Aug 31, 2007 10:49 am

Request time out and only few operating frequencies

Fri Sep 16, 2016 10:16 am

Dear Frds,

i have got a PTP wireless link having RB Metal 5SHPn at both end with 27 dbi grid antenna.

issue:

1) only frequencies in dark bold font ( Pic attached of Access point ) are workable, if i select any other frequency other then the bold font the link do not work, how ever i have selected superchannel as frequency mode in both radios

2) when i see wireless table it shows a separate WDS name while the default WDS name is = wds1 (Pic attached of Access Point)

(3) when i ping the station from Access point then there numerous timeout to the station ( Pic attached)

IP address of Access Point = 192.168.XXX.56

Ip address of Station is = 192.168.XXX.57

i m just not able to understand why it is happening, did i configure it wrong, kindly help, its urgent
You do not have the required permissions to view the files attached to this post.
 
wireless12
Member Candidate
Member Candidate
Topic Author
Posts: 295
Joined: Fri Aug 31, 2007 10:49 am

Re: Request time out and only few operating frequencies

Fri Sep 16, 2016 8:38 pm

plz help
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: Request time out and only few operating frequencies

Sat Sep 17, 2016 8:26 am

Why you think that is necessary to hide 229 from the address? Can you check signal tab of both ends after at least 5 minutes of connection and at least 10mbits of sustained both way simultaneous traffic?
Can you check long-term spectral scan on both ends?
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1290
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: Request time out and only few operating frequencies

Sat Sep 17, 2016 8:47 am

The bold are the usable channels.

Why are you using 802.11a on hardware that supports N?
It has much better range and is more robust.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA

Who is online

Users browsing this forum: No registered users and 38 guests