I'm trying to set up a link between MT Routerboard 532 and Senao SL3054CB3+DX with WDS. It appears to be set up right. As the interface shows that WDS connection is made. In the Status it show that Senao AP client is connected). Clicking on the WDS it shows the MAC address of the SENAO AP.
If I do Tools> IPscan from the WLAN1. It does not ping the Senao AP.
If I do tools >IPscan from the WIRELESS INTERFACE WDS1 connection. It does ping the Senao AP and even show all the other ip adresses which is connected to the senao AP.
However if I lock in to the MT terminal i can not ping the SENAO AP, but can ping the gateway as well as my DNS servers.
When I lockin on my SENAO AP from the other side of the network, it also can't ping the MT or gateway from the SENAO AP.
Gateway (IPCOP 22.214.171.124) - ether1 (192.168.2.2) - MT box - WLAN1 (192.168.3.1) - WDS1 - antenna <----> antenna - WDS - SENAO AP (192.168.3.3)
Setup on WLAN1 (prism) / WLAN2 Atheros ( Both give the same problem)
SSID: Same as on AP
on the Senao AP
WDS enabled, with mac adress of WLAN, same ip adress range
The WLAN is is not configured to a bridge , and has its own IP adress