thank you very much for your replay .write to firstname.lastname@example.org if you want to contact MikroTik support. There are a bit too little information to think about something conclusive.
doablewhat you write, should be doable, however, check timezone settings and check if your router has the time set up properly. Also, check for other entries in that table.
That's pretty strong statement. I can believe you about time, that's easy to check. But some settings may be tricky and you didn't tell us much, only about this one rule.by the way idont have any mistake in time setting and others
here is all my settingsThat's pretty strong statement. I can believe you about time, that's easy to check. But some settings may be tricky and you didn't tell us much, only about this one rule.by the way idont have any mistake in time setting and others
[admin@MikroTik] > export # oct/17/2016 19:26:49 by RouterOS 6.37.1 # software id = H3GM-P0GM # /interface bridge add name=bridge1 /interface ethernet set [ find default-name=ether1 ] name=POE /interface wireless set [ find default-name=wlan1 ] band=2ghz-b/g/n disabled=no frequency=2462 mode=ap-bridge \ ssid=Z----H-----S-----R /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa-psk eap-methods="" mode=dynamic-keys \ wpa-pre-shared-key=00550055 /ip pool add name=dhcp_pool1 ranges=220.127.116.11-18.104.22.168 /ip dhcp-server add address-pool=dhcp_pool1 disabled=no interface=bridge1 name=dhcp1 /tool user-manager customer set admin access=own-routers,own-users,own-profiles,own-limits,config-payment-gw /interface bridge port add bridge=bridge1 interface=wlan1 add bridge=bridge1 interface=ether2 add bridge=bridge1 interface=ether3 add bridge=bridge1 interface=ether4 add bridge=bridge1 interface=ether5 /interface wireless access-list add interface=wlan1 mac-address=00:23:4D:76:8F:F5 time=8h-20h,sun,mon,tue,wed,thu,fri,sat \ vlan-mode=no-tag /ip address add address=22.214.171.124/24 interface=bridge1 network=126.96.36.199 /ip arp add address=188.8.131.52 interface=bridge1 mac-address=00:23:4D:76:8F:F5 /ip cloud set ddns-enabled=yes /ip dhcp-client add default-route-distance=0 dhcp-options=hostname,clientid disabled=no interface=POE /ip dhcp-server lease add address=184.108.40.206 address-lists="" client-id=1:0:23:4d:76:8f:f5 mac-address=\ 00:23:4D:76:8F:F5 server=dhcp1 use-src-mac=yes /ip dhcp-server network add address=220.127.116.11/24 gateway=18.104.22.168 /ip dns set allow-remote-requests=yes servers=22.214.171.124 /ip firewall nat add action=masquerade chain=srcnat add action=masquerade chain=srcnat out-interface=POE protocol=tcp /system clock set time-zone-name=Asia/Baghdad /system lcd set contrast=0 enabled=no port=parallel type=24x4 /system lcd page set time disabled=yes display-time=5s set resources disabled=yes display-time=5s set uptime disabled=yes display-time=5s set packets disabled=yes display-time=5s set bits disabled=yes display-time=5s set version disabled=yes display-time=5s set identity disabled=yes display-time=5s set bridge1 disabled=yes display-time=5s set wlan1 disabled=yes display-time=5s set POE disabled=yes display-time=5s set ether2 disabled=yes display-time=5s set ether3 disabled=yes display-time=5s set ether4 disabled=yes display-time=5s set ether5 disabled=yes display-time=5s /tool user-manager database set db-path=user-manager [admin@MikroTik] >
thank you very much for your interaction with my postI did quick test here, and when I added access rule for one MAC address, set time limit and connected when it was not allowed, I was still allowed to connect, because of interface's implicit default-authentication=yes. It looks like when the time condition does not match, the whole rule gets skipped, as if it wasn't there at all, and then defaults from interface apply. But that's just my first impression, I'd have to test it some more, plus try current RouterOS version, because this AP doesn't have it. Unfortunately, I don't have much time for it right now.
So make sure your RouterOS is up to date, and if it still happens, document it and ask support if it's a bug or feature.
/interface wireless access-list add interface=wlan1 mac-address=00:23:4D:76:8F:F5 add interface=wlan1 mac-address=00:23:4D:76:8F:F5 time=8h-20h,sun,mon,tue,wed,thu,fri,sat \ vlan-mode=no-tag
/interface wireless access-list enable [find comment~"daytimeuser"] /interface wireless access-list disable [find comment~"daytimeuser"]