Community discussions

MUM Europe 2020
 
triac
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Mon Feb 07, 2005 7:35 pm
Location: Italy

How to know real bandwidth of a radio link?

Tue Oct 17, 2006 8:27 pm

Hi, this is my problem:

I have a wireless link (2x RB532 with CM9 cards) and the tx/rx rate is 54 Mbps but when I try to test the link with bandwidth test I have these results:

UDP only Receive=6.7 Mbps
UDP only Send= 10.9 Mbps
TCP only Receive = 5.3 Mbps
TCP only send = 6.7 Mbps

I have about same values on a 24 Mbps link... why?

There is a method for calculate real bandwidth of a wireless link?
How the processor speed can influence the speed of the data transfer?

Thank You

Paolo
Paolo Torri
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6617
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Wed Oct 18, 2006 8:39 am

Paolo,
first of all it is better to run bandwidth test trough wireless link, connect two powerful worskstations on both ends,
PC1==Router1---Wireless---Router2==PC2, run bandwidth from PC1 to PC2.
Bandwidth test takes a lot of CPU resources, if you running tests directly to router.
 
triac
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Mon Feb 07, 2005 7:35 pm
Location: Italy

Sat Oct 21, 2006 6:36 pm

Hi Sergejs, Thank's for answer

I've tried with two PC connected to the routers but results are about the same.... :(

Any suggestion?
Paolo Torri
 
provoshane
newbie
Posts: 28
Joined: Sat Feb 12, 2005 7:17 pm
Location: San Antonio, TX

Tue Oct 31, 2006 11:59 pm

Try running in turbo mode.

Who is online

Users browsing this forum: Google [Bot] and 22 guests