Community discussions

MUM Europe 2020
 
rassasa
just joined
Topic Author
Posts: 2
Joined: Wed Jul 26, 2017 3:45 pm

DynaDish5 P2P 9km link low speed

Wed Jul 26, 2017 3:58 pm

Hi! I bought two DynaDish 5 and created a 9km P2P link. Channel 5260, A/N/AC, Ceee 20/40/80. TX Power 30 dbm. RSSI -59/-59.
But speed test show me float speed in 3-10 Mbits.
I tryed several modes: 802.11, nstream, nv2. The most better results in nv2.
There is on Mircotik site a one document https://i.mt.lv/routerboard/files/anten ... 123306.pdf
As I see 9 km is small distance for this device. What do you recomend to improve link speed?
 
p3rad0x
Long time Member
Long time Member
Posts: 604
Joined: Fri Sep 18, 2015 5:42 pm
Location: South Africa
Contact:

Re: DynaDish5 P2P 9km link low speed

Wed Jul 26, 2017 6:23 pm

Try and set the channel width to 20Mhz and give it a test like that
There you go then you touched something ;-) : it only takes a change in wind direction to screw with your nat :-)
 
Deaqui
just joined
Posts: 23
Joined: Sun Jun 21, 2015 8:18 pm

Re: DynaDish5 P2P 9km link low speed

Thu Jul 27, 2017 3:32 am

Hi!
I maked a ptp with this anntenas in 10 MHz and I pass 30 mbs with nstreme. Distante 11 km.

Who is online

Users browsing this forum: Slavko and 23 guests