Community discussions

 
RoyalDunlin
just joined
Topic Author
Posts: 12
Joined: Wed Mar 16, 2016 4:19 pm

Wireless Wire (RBwAPG-60ad) minimum distance

Thu Nov 30, 2017 2:38 am

I am looking to use the Wireless Wire kit to bridge two buildings that are separated by a railroad track. This distance between the buildings is only 45 meters but the railroad right of way prevents easily running fiber between the two structures.

Is this distance too close to work? Will I need to reduce the power on the units?

Thanks!
 
jarda
Forum Guru
Forum Guru
Posts: 7604
Joined: Mon Oct 22, 2012 4:46 pm

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Thu Nov 30, 2017 9:03 pm

I guess the distance is perfect.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24268
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Fri Dec 01, 2017 11:57 am

Minimum distance is less than 1 meter. They work excellent from 1-150 meters, for longer distances speed will be lower. Your distance is perfect for ~Gigabit link.
No answer to your question? How to write posts
 
server8
Member
Member
Posts: 396
Joined: Fri Apr 22, 2011 1:27 pm

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sat Dec 02, 2017 10:34 am

Normis link avalibility at 150m?

Thank You Giuseppe
 
mutkan
just joined
Posts: 12
Joined: Sun Oct 13, 2013 3:58 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sat Dec 02, 2017 1:15 pm

Minimum distance is less than 1 meter. They work excellent from 1-150 meters, for longer distances speed will be lower. Your distance is perfect for ~Gigabit link.
Hi normis. Sory bad english.
last day install wap60 link 1.1 km. Distance.
i install Wap60 mount (home made) 45 cm parabolic dish antenna.
My signal wap60 device minimum 75 maksimum 85.
but not connected. wap60 Status connect and notconnect, connect and notconnect
continuous.
What problem. ? Wap60 software distance limitation or ack timing problem ?
 
vlatko
newbie
Posts: 48
Joined: Sat Feb 12, 2005 11:28 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sat Dec 02, 2017 3:31 pm

very interesting question,what represent 75-85 signal value, dbi or some percent?
 
vlatko
newbie
Posts: 48
Joined: Sat Feb 12, 2005 11:28 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sun Dec 03, 2017 2:03 am

Also do you have noticed the exact position of the 60ghz antenna inside the device.
Its not in the middle of the box, but also shifted to one side for aprox 10-15mm.
To get a quality result over the parabola, you need to place the small antenna inside the device precisely at the focal point of the parabola.
 
vlatko
newbie
Posts: 48
Joined: Sat Feb 12, 2005 11:28 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sun Dec 03, 2017 3:23 pm

The question is whether it is possible to use it as a parabola feed at all, becouse of a nature of antenna inside (Phase array 60° beamforming).
it is very possible that this is why it constantly reports a connected disconnected problem.
 
mutkan
just joined
Posts: 12
Joined: Sun Oct 13, 2013 3:58 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sun Dec 03, 2017 5:38 pm

very interesting question,what represent 75-85 signal value, dbi or some percent?
wap60 device wireless status screen signal level 0 to 100
 
mutkan
just joined
Posts: 12
Joined: Sun Oct 13, 2013 3:58 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sun Dec 03, 2017 5:39 pm

Also do you have noticed the exact position of the 60ghz antenna inside the device.
Its not in the middle of the box, but also shifted to one side for aprox 10-15mm.
To get a quality result over the parabola, you need to place the small antenna inside the device precisely at the focal point of the parabola.
yes. wap60 device antenna location modified. i transport antenna middle of the box and good focal point.
 
mutkan
just joined
Posts: 12
Joined: Sun Oct 13, 2013 3:58 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sun Dec 03, 2017 5:45 pm

The question is whether it is possible to use it as a parabola feed at all, becouse of a nature of antenna inside (Phase array 60° beamforming).
it is very possible that this is why it constantly reports a connected disconnected problem.
I think LHG60 is not a different design.
 
User avatar
ahteran
newbie
Posts: 32
Joined: Sun Nov 09, 2014 5:07 pm

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sun Dec 03, 2017 8:11 pm

Distance away, reduce distance due to antenna gain.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24268
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Mon Dec 04, 2017 10:45 am

1.1 km? The device is advertised for 100 meters. You should wait for LHG 60G instead.
No answer to your question? How to write posts
 
vlatko
newbie
Posts: 48
Joined: Sat Feb 12, 2005 11:28 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Mon Dec 04, 2017 1:53 pm

Normis, I would ask you for a more detailed answer please?
AT first, lhg60 we will be waiting for another 6 months.
Second, the wap60g range could be twice of the lhg60 on the 90cm parabola, and especially since its ts is probably have higher tx power than that on the lhg60.
The most important is that wap60g will be easily to import as an indoor device, and lhg60 will probably be problematic because it is for fixed outdoor.
so please mikrotik for meaningful answer, is possible to use wap60g to feed parabolic antenna.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24268
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Mon Dec 04, 2017 1:57 pm

The wAP60 has a new type of beamforming antenna that adjusts it's beam based on conditions. It may not work with dishes like that. It is not officially supported and I can't give you any advice on that.
No answer to your question? How to write posts
 
legionnet
just joined
Posts: 4
Joined: Fri Mar 25, 2016 9:42 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sat Dec 09, 2017 11:05 am

Normis, I want to use RBwAPG-60ad for distance 150 meters. What real speed will I get? 1Gbit/s or not?
 
ste
Forum Guru
Forum Guru
Posts: 1813
Joined: Sun Feb 13, 2005 11:21 pm

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sat Dec 09, 2017 12:06 pm

1.1 km? The device is advertised for 100 meters. You should wait for LHG 60G instead.
And 1.1km with 60Ghz would be to much. This is like shooting 5GHz through trees. You need luck and good weather. This is due to physics and no 60Ghz gear I know gives good/reliable results at this distance.
 
haik01
Member
Member
Posts: 406
Joined: Sat Mar 23, 2013 10:25 am
Location: Netherlands

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sat Dec 09, 2017 11:41 pm

the further the distance, the lower the frequency. Why do you think you can reach thousands of kilometres by using low frequency (long wave)?

Short distance: 60 GHz
Long distance: lower frequency.

Do not complain about speed. That is all depending on environment, weather, luck etc.... Today you reach 500 Mbps... tomorrow 900 Mbps, and in the weekend 20 Mbps..... Go ahead, and explain to the clients (when they complain about speed), that today it is rainy, and the connection is not stable....
 
vlatko
newbie
Posts: 48
Joined: Sat Feb 12, 2005 11:28 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Sun Dec 10, 2017 8:29 pm

in fact it's not that easy at all at 60ghz
there are many questions that we do not yet have an answer from the mikrotik
in which frequency range their 60ghz ad devices works.
is it possible to adjust the frequency, if it is not why? and whether it will be possible?
consider next
Oxygen Absorption on 57.3GHz-62.3GHz 11dB/km
Oxygen Absorption on 58.3GHz-62.3GHz 14dB/km
Oxygen Absorption on 62.3GHz-63.3GHz 11dB/km
Oxygen Absorption on 63.3GHz-65.2GHz dropping all way down to from 10db/km to 4dB/km
as you can see if the device can be set to 65175Mhz (65.175GHz) where only 4db/km oxygen attenuation
on the 90cm or 120cm parabolla dish, can be reached up to 8km with a signal below -60dbi
you have to admit that this drastically changes things,
of course, the question is both the legality and the stability of such a link.
taking into account the sensitivity to weather changing, rain and fog, this range is probably smaller,
but some 2-4km are also a big difference compared to the announced upto 1km lhg60.
 
vlatko
newbie
Posts: 48
Joined: Sat Feb 12, 2005 11:28 am

Re: Wireless Wire (RBwAPG-60ad) minimum distance

Mon Dec 11, 2017 8:24 pm

ok, on https://fccid.io/TV7WAPG60AD/Test-Repor ... rt-3521245 we can see that device has tested on three channels
low 58.32GHz middle 60.48GHz and high 62.64GHz, all that channel have 14,9db/km oxygen apsorbtion but
for example we have RBLHG-5nD (International) supports 5150MHz-5875MHz range but we can set on superchannel from 4920MHz up to 6100MHz
is it possible to have superchannel on wap60g, how and in what frequency range?
on middle channel with 90cm parabola calculation give us -55dBi on 2000m with good margin for average rain and fog conditions.

Who is online

Users browsing this forum: No registered users and 58 guests