Hi,
Recently I have bought an mikrotik RouterBOARD 962UiGS-5HacT2Hn . From the begining I have problem with it. I have configured it using Quick Set. It is disconnecting devices or simply work very, very slow or sometimes I can't connect at all.
Right now I'm siting about 2,5 m from AP and I'm trining to troubleshoot what is wrong (see the attachment).
I have already upgraded to a newest version: RouterOS v6.40.5 (stable).
Can anyone help me with it ?
Problem with haP AC
You do not have the required permissions to view the files attached to this post.
Re: Problem with haP AC
Such statement should provide some evidence...
I disagree. Really.
I had some asus devices in the past and these days there is nothing better for me than mikrotik.
I disagree. Really.
I had some asus devices in the past and these days there is nothing better for me than mikrotik.
-
-
kometchtech
Member Candidate
- Posts: 194
- Joined:
- Location: Japan
- Contact:
Re: Problem with haP AC
How about reviewing the following parameters of /interface wireless?
After that, are and properly set up?
https://wiki.mikrotik.com/wiki/Manual:I ... e/Wireless
Code: Select all
distance (integer | dynamic | indoors; Default: dynamic)
adaptive-noise-immunity (ap-and-client-mode | client-mode | none; Default: none)Code: Select all
countryCode: Select all
frequency-modehttps://wiki.mikrotik.com/wiki/Manual:I ... e/Wireless
Re: Problem with haP AC
I have 5 of these RB962 devices running as AP, they work great, wireless coverage is fine, handling 200-300 clients simultaniously without problems.
Re: Problem with haP AC
Normally the device should work perfectly with factory config. Try a reset, or quickSet "home dual" again. With factory config, you could provide Wireless Debug logs and Registration table print
Re: Problem with haP AC
Thanks for the answer. I have tried my own 3 configs 
After all of them I was reseting device to factory. Now is 4th - default one using Quick Set.
Today tests. On laptop is working decently fine (it depends where I sit
) but on smartphones it is disaster :/ wireless I was siting arround 10 - 11m from AP two walls (hollow brick), closer means 5-6m one wall (hollow brick).
I have a hope that shop, where I bought this router, will take it back and give me money back.
P.S. Where is the second post from this discussion ?
After all of them I was reseting device to factory. Now is 4th - default one using Quick Set. Today tests. On laptop is working decently fine (it depends where I sit
) but on smartphones it is disaster :/ wireless I was siting arround 10 - 11m from AP two walls (hollow brick), closer means 5-6m one wall (hollow brick).I have a hope that shop, where I bought this router, will take it back and give me money back.
P.S. Where is the second post from this discussion ?
You do not have the required permissions to view the files attached to this post.
-
-
arnoldmikro
newbie
- Posts: 27
- Joined:
- Location: miami fl usa
Re: Problem with haP AC
Try a channel other than 1 (6 or 11)
There may be rf interference that will not show
Wireless Snooper may give you more insight
There may be rf interference that will not show
Wireless Snooper may give you more insight
Re: Problem with haP AC
-73 respective -85 dBm receive levels are quite low. This explains the issues you got there.
Re: Problem with haP AC
On old tplink -78 -80 and the connection was stable, but slow.
Now I can use wireless only in two rooms. For other rooms I should but one mikrotik per room ?:))
Now I can use wireless only in two rooms. For other rooms I should but one mikrotik per room ?:))
Re: Problem with haP AC
A. Try to WiFi lower power ... high power does not mean better quality
B. Try to disbale 802.11b standard ... leave just g/n
B. Try to disbale 802.11b standard ... leave just g/n
Who is online
Users browsing this forum: No registered users and 44 guests