Community discussions

MikroTik App
 
wwwevecom
newbie
Topic Author
Posts: 39
Joined: Tue Feb 28, 2012 7:53 pm

capsman ping 50% loss

Tue Jan 30, 2018 4:23 pm

Hi friends, I have CapsMan sys with 10 caps, all with the same 6.41 version
I see a strange problem, if I configure newly bought RB951ui 2hnd router lika a Cap, I have not problem. But if router is not new, if I used it lika a router, for example for 1-2 years, then I configure lika a CAP - watching ping 50% loss-- 1 ping 0ms, 1 ping 100% loss, 1 ping 0ms, 1 ping 100% loss. Before few days it happened to me with SXT routerboard purchased 2016 june. Also happens if it works lika a Wifi PTP bridge AP mode. After 2-3 days pains I found that if I set /interface bridge set protocol-mode=none, SXT wifi bridge works fine, but another Caps works with standard /interface bridge set protocol-mode=rstp. This is obstacle for remote configure - I lose access and I do not know what to do.
 
p3rad0x
Long time Member
Long time Member
Posts: 637
Joined: Fri Sep 18, 2015 5:42 pm
Location: South Africa
Contact:

Re: capsman ping 50% loss

Mon Feb 05, 2018 1:24 pm

It could be a network loop maybe.

I see a lot of network loops at clients with lightning damage on the router, one port on the router would show as running even if there is no cable plugged into it causing a loop.

If capsman detects a probable loop then it downs the interface for a few seconds
 
wwwevecom
newbie
Topic Author
Posts: 39
Joined: Tue Feb 28, 2012 7:53 pm

Re: capsman ping 50% loss  [SOLVED]

Sat Feb 17, 2018 8:58 pm

I don't know how and why, but when I create wan port Trunk with 2 or 3 VLANs all works fine. I use only one vlan

Who is online

Users browsing this forum: Babujnik, mstanciu, sinisa and 23 guests