Community discussions

MikroTik App
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Extended frequency reqiured for 2.7-2.9 Ghz

Sat Jan 13, 2007 9:47 am

hiiii

i need frequency range 2.7-2.9 Ghz but i disappoint to see this can be done from old mini pci card AR5212 reached 2.732 only

has anybody give me idea atleast how can i get this card for 2.7 Ghz oprations

Thnaks in advance
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Mon Jan 15, 2007 12:28 pm

a special permission is required. contact support please
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Mon Jan 15, 2007 12:43 pm

hiiii normis


thanks for reply , i got answer this can be done with AR5212 card and custom frequency ... i have already purchased and update arround my all board with custom frequency and planing for huge deployments in spefic ferquency ....


can you suggest me for further step or will i wait for corerct mini pci as i know software only read the frequency from chipset EEPROM

correct me if iam worng
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Mon Jan 15, 2007 12:58 pm

after you receive this card, see `/interface wireless print`. it will display all supported frequencies (read from eeprom). frequency-mode=superchannel will unlock them.
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Mon Jan 15, 2007 1:03 pm

this very common command already done from, last 4 month back

thanks .....
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Mon Jan 15, 2007 2:43 pm

so where is the problem then?
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Mon Jan 15, 2007 3:12 pm

problem is that AR5313 based mini pci card not showing the reqiured frequency showing 2.3-6.1 after upgrading the custom frequency ..

i need suggestion for 2.3-2.7 supported frequency

thanks inadvance
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Mon Jan 15, 2007 3:14 pm

most of the cards don't suport this range, there is no way to have this frequency if the card's chip doesn't understand it.
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Mon Jan 15, 2007 3:22 pm

seee the fquency support bu AR5212 mini pci

interface wireless info> print
0 interface-type=Atheros AR5212 tx-power-control=yes ack-timeout-control=yes
alignment-mode=yes virtual-aps=yes noise-floor-control=yes
scan-support=yes burst-support=yes nstreme-support=yes
supported-bands=2ghz-b,5ghz,5ghz-turbo,2ghz-g
2ghz-b-channels=2312,2317,2322,2327,2332,2337,2342,2347,2352,2357,2362,2367,
2372,2412,2417,2422,2427,2432,2437,2442,2447,2452,2457,2462,
2467,2472,2512,2532,2552,2572,2592,2612,2632,2652,2672,2692, 2712,2732
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Mon Jan 15, 2007 3:25 pm

this means that this card will not support 2.9 in any way.
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Mon Jan 15, 2007 3:35 pm

iam ready with this card but iam not sure which card comes with Ar5212.......if you have suggestion kinldy suggest
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Mon Jan 15, 2007 3:40 pm

I still don't understand your problem :) if you have this `info` printout, where did you get it if you don't have this card?

I don't think there are ANY cars that support 2900Mhz
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Mon Jan 15, 2007 3:49 pm

I think old CM6 wireless card uses mentioned chipset, the following card does not support 2900 frequencies anyway.
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Mon Jan 15, 2007 3:50 pm

i got the refrenece for 2.7 Ghz from forum .......

but there is not mentioend the card manufacrer

simple is that iam looking for 2.7 ghz card atleast if 2.9 ghz is not aviable

iam not facing any problem iam asking for solution for 2.7 Ghz mini pci

which are supported 2.7 Ghz
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Tue Jan 16, 2007 4:29 am

I don't think there are ANY cars that support 2900Mhz
Wanna bet?

Image
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Tue Jan 16, 2007 4:30 am

i got the refrenece for 2.7 Ghz from forum .......

but there is not mentioend the card manufacrer

simple is that iam looking for 2.7 ghz card atleast if 2.9 ghz is not aviable

iam not facing any problem iam asking for solution for 2.7 Ghz mini pci

which are supported 2.7 Ghz
hi I need "chip info" for those 2.3-2.7ghz (old 5212 cards) do you have it?

like this :
mac:0x4/0x2, phy:0x30, a5:0x17, a2:0x0, eeprom:0x3002
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Tue Jan 16, 2007 7:19 am

This is really fantastic .............pics

hope i will find the chip with the reqiured frequency ............


has anybody update me the chipset ..Normis pl take look as this frequency comes with MT ...:)
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6263
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Tue Jan 16, 2007 9:38 am

screenshot was made and in screen shot you can clearly see that application is winbox, so it has to be connected to routeros box, so routeros supports that frwq, you just need to get card that supports that.

i do not see where is the problem? :?

and what normis said - that for this moment he does not know if there is any card available. atleast from MT it is not.
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Tue Jan 16, 2007 9:41 am

thanks for screen shot ...can you also update which mini pci card is this ...

i never say regarding any problem iam asking mini pci card make which support reqiured frequency ..Definitely MT not make this card....
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Tue Jan 16, 2007 1:58 pm

screenshot was made and in screen shot you can clearly see that application is winbox, so it has to be connected to routeros box, so routeros supports that frwq, you just need to get card that supports that.

i do not see where is the problem? :?

and what normis said - that for this moment he does not know if there is any card available. atleast from MT it is not.
You're clearly wrong about this...
Even though winbox reported that very customize frequency, I got list of frequency from 500mhz up to 41ghz, that screenshot is just a little number :D

But that frequency didn't work! Only 2312-2732 works fine.
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Tue Jan 16, 2007 2:07 pm

i was asking for 2312-2732 this frequency card only .....make and avibilty nowdays ......
 
User avatar
djape
Member
Member
Posts: 465
Joined: Sat Nov 06, 2004 7:54 pm
Location: Serbia

Tue Jan 16, 2007 3:00 pm

I have a card that supports 2312-2732 and it works without problem.

The card has Atheros chipset AR5212 manufacturer is Pheenet and model number is WL-54PCIA

For some reason Pheenet removed all info concerning this card, there are links on google but pdf files are removed from their site.

Good luck ;)
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Tue Jan 16, 2007 3:12 pm

not all ar5212 support 2312-2732

linksys wmp55ag is atheros 5212a chipset but didn't have 2.7ghz

just hunt all 5212a cards, especially from proxim b/g cards, they're all using atheros 5212a
 
User avatar
djape
Member
Member
Posts: 465
Joined: Sat Nov 06, 2004 7:54 pm
Location: Serbia

Tue Jan 16, 2007 3:37 pm

not all ar5212 support 2312-2732

linksys wmp55ag is atheros 5212a chipset but didn't have 2.7ghz

just hunt all 5212a cards, especially from proxim b/g cards, they're all using atheros 5212a
Completely agree ;)
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Tue Jan 16, 2007 8:51 pm

has anobody check this with 2.3-3.7 Ghz NL-5354MP PLUS Aries2 Dual Band Wireless Mini-PCI Adapter
Pheenet is not seems anymore , i have found so many with AR5212 but now confused what should i use for getting 2.7 Ghz frequency ny suggestion or i will crux Ar5212 cards :)
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Wed Jan 17, 2007 3:05 am

just try it :D

different hardware revision makes your hunt completely fun :D

i have 5211 with 2312-2732 band is a/b-only, if you want it, give me your email address :D
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Wed Jan 17, 2007 7:33 am

thanks for concern ...............my email id is ...vikram_sharma24in@indiatimes.com
 
akshay24
newbie
Topic Author
Posts: 41
Joined: Sat Oct 14, 2006 11:33 pm

Tue Jan 23, 2007 1:49 pm

 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6695
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Tue Jan 23, 2007 5:04 pm

As I said in the previous post, old CM6 card support the following frequencies for 2.4ghz-b,

[admin@MikroTik] interface wireless info> print
0 interface-type=Atheros AR5212
chip-info="mac:0x5/0x6, phy:0x41, a5:0x17, a2:0x23, eeprom:0x3004"
pci-info="00:04.0" capabilities=tx-power-control,ack-timeout-control,
virtual-ap,alignment-mode,noise-floor-
control,scanning,burst-support,nstreme,
sniffing,compression
default-periodic-calibration=enabled
supported-bands=2ghz-b,5ghz,5ghz-turbo,2ghz-g,2ghz-g-turbo
2ghz-b-channels=2312:0,2317:0,2322:0,2327:0,2332:0,2337:0,2342:0,2347:0,
2352:0,2357:0,2362:0,2367:0,2372:0,2412:0,2417:0,2422:0,
2427:0,2432:0,2437:0,2442:0,2447:0,2452:0,2457:0,2462:0,
2467:0,2472:0,2484:0,2512:0,2532:0,2552:0,2572:0,2592:0,
2612:0,2632:0,2652:0,2672:0,2692:0,2712:0,2732:0
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Tue Jan 30, 2007 1:02 am

If it can show unusuall frequencies but doesn't mean it will work
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26378
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Tue Jan 30, 2007 9:04 am

If it can show unusuall frequencies but doesn't mean it will work
not true! if `info print` can show them, it means you can use them.
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Tue Jan 30, 2007 5:45 pm

If it can show unusuall frequencies but doesn't mean it will work
not true! if `info print` can show them, it means you can use them.
have you seen my previous post up there? (only partial screenshot I made)
info print showed a lot of "CRAZY" channels..
 1 interface-type=Atheros AR5211 
   chip-info="mac:0x4/0x2, phy:0x30, a5:0x17, a2:0x0, eeprom:0x3002" 
   pci-info="00:0d.0" capabilities=tx-power-control,ack-timeout-control,
                                   alignment-mode,noise-floor-control,scanning,
                                   burst-support,nstreme,sniffing 
   default-periodic-calibration=disabled 
   supported-bands=2ghz-b,5ghz,5ghz-turbo 
   2ghz-b-channels=2412:0,2417:0,2422:0,2427:0,2432:0,2437:0,2442:0,2447:0,
                   2452:0,2457:0,2462:0,2467:0,2472:0,2484:0,2512:0,2532:0,
                   2552:0,2572:0,2592:0,2612:0,2632:0,2652:0,2672:0,2692:0,
                   2712:0,2732:0,437:0,469:0,501:0,533:0,565:0,597:0,629:0,
                   661:0,693:0,725:0,757:0,789:0,821:0,853:0,885:0,917:0,949:0,
                   981:0,1013:0,1045:0,1077:0,1109:0,1141:0,1173:0,1205:0,
                   1237:0,1269:0,1301:0,1333:0,1365:0,1397:0,1429:0,1461:0,
                   1493:0,1525:0,1557:0,1589:0,1621:0,1653:0,1685:0,1717:0,
                   1749:0,1781:0,1813:0,1845:0,1877:0,1909:0,1941:0,1973:0,
                   2005:0,2037:0,2069:0,2101:0,2133:0,2165:0,2197:0,2229:0,
                   2261:0,2293:0,2325:0,2357:0,2389:0,2421:0,2453:0,2485:0,
                   2517:0,2549:0,2581:0,2613:0,2645:0,2677:0,2709:0,2741:0,
                   2773:0,2805:0,2837:0,2869:0,2901:0,2933:0,2965:0,2997:0,
                   3029:0,3061:0,3093:0,3125:0,3157:0,3189:0,3221:0,3253:0,
                   3285:0,3317:0,3349:0,3381:0,3413:0,3445:0,3477:0,3509:0,
                   3541:0,3573:0,3605:0,3637:0,3669:0,3701:0,3733:0,3765:0,
                   3797:0,3829:0,3861:0,3893:0,3925:0,3957:0,3989:0,4021:0,
                   4053:0,4085:0,4117:0,4149:0,4181:0,4213:0,4245:0,4277:0,
                   4309:0,4341:0,4373:0,4405:0,4437:0,4469:0,4501:0,4533:0,
                   4565:0,4597:0,4629:0,4661:0,4693:0,4725:0,4757:0,4789:0,
                   4821:0,4853:0,4885:0,4917:0,4949:0,4981:0,5013:0,5045:0,
                   5077:0,5109:0,5141:0,5173:0,5205:0,5237:0,5269:0,5301:0,
                   5333:0,5365:0,5397:0,5429:0,5461:0,5493:0,5525:0,5557:0,
                   5589:0,5621:0,5653:0,5685:0,5717:0,5749:0,5781:0,5813:0,
                   5845:0,5877:0,5909:0,5941:0,5973:0,6005:0,6037:0,6069:0,
                   6101:0,6133:0,6165:0,6197:0,6229:0,6261:0,6293:0,6325:0,
                   6357:0,6389:0,6421:0,6453:0,6485:0,6517:0,6549:0,6581:0,
                   6613:0,6645:0,6677:0,6709:0,6741:0,6773:0,6805:0,6837:0,
                   6869:0,6901:0,6933:0,6965:0,6997:0,7029:0,7061:0,7093:0,
                   7125:0,7157:0,7189:0,7221:0,7253:0,7285:0,7317:0,7349:0,
                   7381:0,7413:0,7445:0,7477:0,7509:0,7541:0,7573:0,7605:0,
                   7637:0,7669:0,7701:0,7733:0,7765:0,7797:0,7829:0,7861:0,
                   7893:0,7925:0,7957:0,7989:0,8021:0,8053:0,8085:0,8117:0,
                   8149:0,8181:0,8213:0,8245:0,8277:0,8309:0,8341:0,8373:0,
                   8405:0,8437:0,8469:0,8501:0,8533:0,8565:0,8597:0,8629:0,
                   8661:0,8693:0,8725:0,8757:0,8789:0,8821:0,8853:0,8885:0,
                   8917:0,8949:0,8981:0,9013:0,9045:0,9077:0,9109:0,9141:0,
                   9173:0,9205:0,9237:0,9269:0,9301:0,9333:0,9365:0,9397:0,
                   9429:0,9461:0,9493:0,9525:0,9557:0,9589:0,9621:0,9653:0,
                   9685:0,9717:0,9749:0,9781:0,9813:0,9845:0,9877:0,9909:0,
                   9941:0,9973:0,10005:0,10037:0,10069:0,10101:0,10133:0,
                   10165:0,10197:0,10229:0,10261:0,10293:0,10325:0,10357:0,
                   10389:0,10421:0,10453:0,10485:0,10517:0,10549:0,10581:0,
                   10613:0,10645:0,10677:0,10709:0,10741:0,10773:0,10805:0,
                   10837:0,10869:0,10901:0,10933:0,10965:0,10997:0,11029:0,
                   11061:0,11093:0,11125:0,11157:0,11189:0,11221:0,11253:0,
                   11285:0,11317:0,11349:0,11381:0,11413:0,11445:0,11477:0,
                   11509:0,11541:0,11573:0,11605:0,11637:0,11669:0,11701:0,
                   11733:0,11765:0,11797:0,11829:0,11861:0,11893:0,11925:0,
                   11957:0,11989:0,12021:0,12053:0,12085:0,12117:0,12149:0,
                   12181:0,12213:0,12245:0,12277:0,12309:0,12341:0,12373:0,


to be continue ...
THIS PART NOT SHOWN, TOO MANY CHANNELS
                  28309:0,28341:0,28373:0,28405:0,28437:0,28469:0,28501:0,
                   28533:0,28565:0,28597:0,28629:0,28661:0,28693:0,28725:0,
                   28757:0,28789:0,28821:0,28853:0,28885:0,28917:0,28949:0,
                   28981:0,29013:0,29045:0,29077:0,29109:0,29141:0,29173:0,
                   29205:0,29237:0,29269:0,29301:0,29333:0,29365:0,29397:0,
                   29429:0,29461:0,29493:0,29525:0,29557:0,29589:0,29621:0,
                   29653:0,29685:0,29717:0,29749:0,29781:0,29813:0,29845:0,
                   29877:0,29909:0,29941:0,29973:0,30005:0,30037:0,30069:0,
                   30101:0,30133:0,30165:0,30197:0,30229:0,30261:0,30293:0,
                   30325:0,30357:0,30389:0,30421:0,30453:0,30485:0,30517:0,
                   30549:0,30581:0,30613:0,30645:0,30677:0,30709:0,30741:0,
                   30773:0,30805:0,30837:0,30869:0,30901:0,30933:0,30965:0,
                   30997:0,31029:0,31061:0,31093:0,31125:0,31157:0,31189:0,
                   31221:0,31253:0,31285:0,31317:0,31349:0,31381:0,31413:0,
                   31445:0,31477:0,31509:0,31541:0,31573:0,31605:0,31637:0,
                   31669:0,31701:0,31733:0,31765:0,31797:0,31829:0,31861:0,
                   31893:0,31925:0,31957:0,31989:0,32021:0,32053:0,32085:0,
                   32117:0,32149:0,32181:0,32213:0,32245:0,32277:0,32309:0,
                   32341:0,32373:0,32405:0,32437:0,32469:0,32501:0,32533:0,
                   32565:0,32597:0,32629:0,32661:0,32693:0,32725:0,32757:0,
                   32789:0,32821:0,32853:0,32885:0,32917:0,32949:0,32981:0,
                   33013:0,33045:0,33077:0,33109:0,33141:0,33173:0,33205:0,
                   33237:0,33269:0,33301:0,33333:0,33365:0,33397:0,33429:0,
                   33461:0,33493:0,33525:0,33557:0,33589:0,33621:0,33653:0,
                   33685:0,33717:0,33749:0,33781:0,33813:0,33845:0,33877:0,
                   33909:0,33941:0,33973:0,34005:0,34037:0,34069:0,34101:0,
                   34133:0,34165:0,34197:0,34229:0,34261:0,34293:0,34325:0,
                   34357:0,34389:0,34421:0,34453:0,34485:0,34517:0,34549:0,
                   34581:0,34613:0,34645:0,34677:0,34709:0,34741:0,34773:0,
                   34805:0,34837:0,34869:0,34901:0,34933:0,34965:0,34997:0,
                   35029:0,35061:0,35093:0,35125:0,35157:0,35189:0,35221:0,
                   35253:0,35285:0,35317:0,35349:0,35381:0,35413:0,35445:0,
                   35477:0,35509:0,35541:0,35573:0,35605:0,35637:0,35669:0,
                   35701:0,35733:0,35765:0,35797:0,35829:0,35861:0,35893:0,
                   35925:0,35957:0,35989:0,36021:0,36053:0,36085:0,36117:0,
                   36149:0,36181:0,36213:0,36245:0,36277:0,36309:0,36341:0,
                   36373:0,36405:0,36437:0,36469:0,36501:0,36533:0,36565:0,
                   36597:0,36629:0,36661:0,36693:0,36725:0,36757:0,36789:0,
                   36821:0,36853:0,36885:0,36917:0,36949:0,36981:0,37013:0,
                   37045:0,37077:0,37109:0,37141:0,37173:0,37205:0,37237:0,
                   37269:0,37301:0,37333:0,37365:0,37397:0,37429:0,37461:0,
                   37493:0,37525:0,37557:0,37589:0,37621:0,37653:0,37685:0,
                   37717:0,37749:0,37781:0,37813:0,37845:0,37877:0,37909:0,
                   37941:0,37973:0,38005:0,38037:0,38069:0,38101:0,38133:0,
                   38165:0,38197:0,38229:0,38261:0,38293:0,38325:0,38357:0,
                   38389:0,38421:0,38453:0,38485:0,38517:0,38549:0,38581:0,
                   38613:0,38645:0,38677:0,38709:0,38741:0,38773:0,38805:0,
                   38837:0,38869:0,38901:0,38933:0,38965:0,38997:0,39029:0,
                   39061:0,39093:0,39125:0,39157:0,39189:0,39221:0,39253:0,
                   39285:0,39317:0,39349:0,39381:0,39413:0,39445:0,39477:0,
                   39509:0,39541:0,39573:0,39605:0,39637:0,39669:0,39701:0,
                   39733:0,39765:0,39797:0,39829:0,39861:0,39893:0,39925:0,
                   39957:0,39989:0,40021:0,40053:0,40085:0,40117:0,40149:0,
                   40181:0,40213:0,40245:0,40277:0,40309:0,40341:0,40373:0,
                   40405:0,40437:0,40469:0,40501:0,40533:0,40565:0,40597:0,
                   40629:0,40661:0,40693:0,40725:0,40757:0,40789:0,40821:0,
                   40853:0,40885:0,40917:0,40949:0,40981:0,41013:0,41045:0,
                   41077:0,41109:0,41141:0,41173:0,41205:0,41237:0,41269:0,
                   41301:0,41333:0,41365:0,41397:0,41429:0,41461:0,41493:0 


the end.
tried to make connection ap-bridge<->station using 5ghz-turbo freq 5333mhz (mac address number erased using paint :D):
Image
 
User avatar
stephenpatrick
Forum Veteran
Forum Veteran
Posts: 702
Joined: Fri Aug 20, 2004 12:26 pm
Location: UK
Contact:

Tue Jan 30, 2007 11:56 pm

Wow!
400 MHz to over 40GHz!
Now I want that radio card ....

[seriously, that's really strange. An ROS/card compatibility, or is the card damaged?]
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Thu Feb 01, 2007 2:19 am

Wow!
400 MHz to over 40GHz!
Now I want that radio card ....

[seriously, that's really strange. An ROS/card compatibility, or is the card damaged?]
It's supported by ROS. Of course card works fine. I'm able to create link using these cards :D
 
bokili
Member Candidate
Member Candidate
Posts: 135
Joined: Wed Aug 16, 2006 8:52 pm

Thu Feb 01, 2007 5:47 am

OOh!

Please tell us, which one is this card which support channels to 40GHZ???? :)
 
uldis
MikroTik Support
MikroTik Support
Posts: 3446
Joined: Mon May 31, 2004 2:55 pm

Thu Feb 01, 2007 12:46 pm

it is a bug, which will be fixed in the next release.
 
advantz
Member Candidate
Member Candidate
Posts: 187
Joined: Thu Jul 08, 2004 4:11 am

Thu Feb 01, 2007 2:51 pm

it is a bug, which will be fixed in the next release.
thank god ^_^
 
cmit
Forum Guru
Forum Guru
Posts: 1547
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Thu Feb 01, 2007 3:02 pm

Why?
I would have like it better if they made it so that all those frequencies really worked... :P

Best regards,
Christian Meis
 
cmit
Forum Guru
Forum Guru
Posts: 1547
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Thu Feb 01, 2007 3:26 pm

What a frightening idea - to purchase RF interfaces for 35/38 GHz links for a few bucks :D ...

Christian
 
User avatar
saintofinternet
Forum Veteran
Forum Veteran
Posts: 768
Joined: Thu Oct 15, 2009 3:52 am

Re: Extended frequency reqiured for 2.7-2.9 Ghz

Sun Mar 09, 2014 7:15 am

reviving a very old post...

but seriously can we use a 400 mhz frequency radio card on a routerboard?? is it possible??

actually want to achieve something like www.4rf.com ( Aprisa XE ) is that possible using mikrotik gear with appropriate radio cards?

Who is online

Users browsing this forum: CedrikAlton and 33 guests